Steel Grade, Mechanical Properties, Chemical Composition, Grade Equivalent

S690ql Steel Plate,S690ql Steel Pipe Steel Exporter

Gangsteel Produce and export EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. EN 10025-6 S690QL ,,EN 10025-6 S690QL steel,EN 10025-6 S690QL equivalent,EN 10025-6 S690QL datenblatt,EN 10025-6 S690QL material,en 10025-6 EN 10025-6 S690QL,EN 10025-6 S690QL equivalent material,EN 10025-6 S690QL material equivalent,EN 10025-6 S690QL plate,EN 10025-6 S690QL data sheet,EN 10025-6 S690QL hardness,EN 10025-6 S690QL thyssenkrupp,EN 10025-6 S690QL properties, EN 10025-6 S690QL equivalent astm,EN 10025-6 S690QL chemical composition,EN 10025-6 S690QL welding,EN 10025-6 S690QL suppliers and EN10025-6

Increasing the heat enter resulted in earlier localization of the strain and fewer most power. From the start of Nineteen Nineties, the weldability of structural steels with tensile strength of greater than 780 MPa has been researched extensively .

S690QL

Grade

Sample Orientation

@ 0°C

@-20°C

@-40°C

@-60°C

S690QL

Longitudinal

50 J

40 J

30 J

¨C¨C

Traverse

35 J

30 J

27 J

¨C¨C

The production of the S690QL GANGSTEEL PLATES is done by using premium quality of alloy that is actually sourced from reliable market vendors. The material here is heat treated the tempering and quenching process and is having excellent welding and ending properties.s690ql1 property pneuscoolscharleroi.beS690QL1 Quenched and Tempered Structural Steel Beverly EN10025 S690QL1 Extra Toughness Steel Plate. Steel Number 1.8988 EN10025:6:2004 S690QL1 has a minimum yield strength of 690Mpa in quenched and The causes of multiple sclerosis Use Prednisone tempered conditions, it has extra tough with minimum impact values lower to 60ºC.., mechanical properties and microtexture of 1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters. Various microstructures are formed but no martensite after process optimization. Texture is modified in mechanically affected zones of the weld.

 

S690 QL steel is a high yield structural steel grade produced in compliance with EN 10025:6:2004.The material is heat treated using the quench and temper process and has good bending and welding properties. Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.S690 QL steel,S690QL Chemical,S690QL steel supplier GANGSTEEL Offer S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004.If you need buy S690 QL,we can offer S690QL Mechanical Properties and S690QL Chemical Composition.En10025:S690Q S690QL S690QL1 pressure vessel steel plates7.chemical composition, mechanical property,and yield strength If you need EN10025:S460Q S460QL S460QL1 S500Q S500QL S500QL1 S550Q S550QL S550QL1 S620Q S620QL S620QL1 S690Q S690QL S690QL1 S890Q S890QL S890QL1 S960Q S960QL pressure vessel steel plate,or chemical composition, mechanical property,and tensile strength

Gangsteel supply EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. Call for more information or find out more here.
S690QL – Grade Designation
The grade designation of S690QL are the following:
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Quenching & Tempering
L = Low notch toughness testing temperature

EN 10025-6 S690QL – Chemical Composition

Element

Percentage %

Element

Percentage %

C

0.20

Cu

0.50

Si

0.80

Mo

0.70

Mn

1.70

Nb*

0.06

P

0.025

Ni

2.0

S

0.015

Ti*

0.05

N

0.015

V*

0.12

B

0.0050

Zr*

0.15

Cr

1.50

 

EN 10025-6 S690QL – V Notch Impact Testing

Designation

Mechanical Properties (ambient temperature)

Steel Name

Steel Number

Min. Yield Strength Reh MPa

Tensile Strength Rm MPa

Min. % elongation after fracture

Nominal thickness (mm)

Nominal thickness (mm)

≥3 ≤50

≥50 ≤100

≥100 ≤150

≥3 ≤50

≥50 ≤100

≥100 ≤150

S690QL

1.8931

690

650

630

770/940

760/930

710/900

14

Due to the material’s high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency. The technical details of S690QL are outlined below. S690QL Grade Designation. The grade designation of S690QL are the followings = Structural Steel; 690 = minimum yield strength (MPa)S690QL / 1.8928 Steel Number Chemical composition Chemical composition of steel S690QL (1.8928), Standards of steel S690QL (1.8928) Mechanical Properties of steel S690QL (1.8928) Equivalent grades of steel S690QL (1.8928) steel S690QL (1.8928) Tensile Strength, Elongation, Proof strength , HardnessS690QL High Yield Strength SteelS690QL Dillimax 690T is a fine grained quenched and tempered steel plate notable for its high strength. S690QL plates are used in a wide variety of engineering applications where strength is important including cranes, critical structural components in building and stadia and
EN 10025-6 S690QL stock list

Grade

Size mm

Thick

Width

Length

BS700MCK2

6*1500*13000

6

1500

13000

BS700MCK2

6*1500*13000

6

1500

13000

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1550*11000

6

1550

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*13000

8

1500

13000

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1800*13000

8

1800

13000

BS700MCK2

8*1800*13000

8

1800

13000

BS900D

3*1400*9000

3

1400

9000

BS900D

3*1400*9000

3

1400

9000

BS900D

4*1500*13000

4

1500

13000

BS900D

5*1500*12000

5

1500

12000

BS900D

6*1650*12300

6

1650

12300

BS900D

6*1650*12300

6

1650

12300

BS900D

6*1650*2500

6

1650

2500

BS900D

7*1500*12000

7

1500

12000

BS900D

7*1500*12000

7

1500

12000

BS900D

8*1500*12000

8

1500

12000

BS900D

8*1800*13000

8

1800

13000

BS960E

12*1500*12000

12

1500

12000

BS960E

12*1500*12000

12

1500

12000

BS960E

3*1400*9000

3

1400

9000

BS960E

4*1500*13000

4

1500

13000

BS960E

4*1500*13000

4

1500

13000

BS960E

5*1500*12000

5

1500

12000

BS960E

5*1500*12000

5

1500

12000

In addition, enlightened utilization of micro-alloying components helps enhancing properties, including the influence toughness, of the welded elements . Still, the biggest problem in welding of HSS is to maintain the good balance of energy and toughness after welding because the fusion welding induces excessive thermal gradients and severe microstructural adjustments in the weld zone. Multipurpose Low-Carbon Steel Also generally known as mild metal, multipurpose metal consists of low-carbon grades, corresponding to 1018 and A36. Electron beam welding is thought for its slim weld zone with excessive depth to width ratio, much less heat affected zone, less distortion and contamination.

EN 10025-6 S690QL microstructure

S890QL1, Steel Number 1.8925 is an additional excessive energy and toughness metal to EN . It is possible to provide metal plates that have more than twice the power of those produced from mild metal https://gangsteel.com/low-alloy-and-high-strength-steel-plate/en10025-6-steel-plate/ via a heat therapy course of known as quenching and tempering. Steel is heated to some extent above its higher crucial temperature and is then very quickly cooled in water.

Gas Cylinder Steel Plate

The checks applied on all the materials included tensile, hardness profiles , Charpy-V impact toughness checks, and microstructure evaluation using scanning electron microscope . For one of many TMCP steels, some extended exams have been conducted to outline how the tensile properties change alongside the weld line.

for welding the structures made of the high stren gth steel S690QL is presented. That steel belongs in to a group of steels with e xceptional mechanical properties. The most prominent properties S690QL Structural Steel Plate, S690QL Plate, DILLIMAX 690 S690QL Structural Steel Plate Specification Thickness 12 60mm Width 1500 3500mm Length 3000 18000mm Grade S690QL EN10137 2 EN10025 6:2004, A709 100, DILLIMAX 690, NAXTRA 70, WELDOX 700, E690, JFE HITEN 780LE, ALFORM 700. Properties of S690QL Structural Steel PlateEN 10025 6 S690QL high yield structural steels Plates Other Types Of EN 10025 6 S690QL Q + T structural steels Plates . EN 10025 6 Plates Stockholder, S690QL Plates Stockists in Maharashtra Mumbai, Grade S690QL hot rolled structural steel Plates Stockyard, high yield strength EN 10025 6 S690QL structural steels Plate wholesaler, S690QL (Q + T ) quenched and tempered condition heat treatment steel plate, material No. 1.8928 Plates Suppliers

S690QL Plates is a high yield structural steel or High strength steels grade produced in compliance with EN 10025:6:2004. The material is heats treated using the quench and temper process and has good bending and welding propertiesS690QL/S690QL1/S690QL2 High Strength Steel PlateS690Q/S690QL/S690QL1 HSLA steel plate with Quenching and Tempering Steel. 1.Applicationlow temperature resistant, high strength of key parts, construction machinery, mining machinery structure, etc. 2 .Steel GradesS690Q/S690QL/S690QL1 . Execution standardBS EN10025 04 Size5 ~ 300 mm x 1500 4500 mm x L. 3 . Supply technical conditionsMicrostructure, mechanical properties and microtexture of It is shown that it is possible to weld this high yield strength steel using FSW process with satisfactory geometric, microstructural and mechanical properties. Highlights1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters.

Two try out campaigns of friction stir welding (FSW) were performed with different friction parameters to join S690QL high yield strength steel. The welds were investigated at macroscopic and microscopic scales using optical and electronic microscopy and microhardness mapping. Welds of the second campaign exhibit microstructures and mechanical EN 10025 6 S690QLS690 QLS690QL High Yield Steel Victor Steel is leading suppliers of S690QL Steel Plates.we have Large stock of EN 10025 6 S690QL plate.EN 10025 S690QL High Strength Structural Steel Plate price US $300 800/TonS690QL Plate Supplier Exporter India / S690QL Plate Price S690ql Steel Exporter India, Astm A514 S690ql High Tensile Structural Steel Plate, High Yeild Strength Alloy Naxtra M700 Steel Plates, Dillimax 690t High Yeild Steel Plates Exporter, Qste 690 Tm Hsla Yield Steel Plate, Din En S690 Q Plates Stockiest, S890ql Steel

S690QL Longitudinal Transverse 35 J 40 J 30 J 30 J 27 J 60 J S690QL1 Longitudinal Transverse 40 J 50 J 35 J 40 J 30 J 30 J 27 J Number of Tests Tensile test and impact test (3 samples) every 40 t or per heat treatment unit respectively.Mechanical properties of EN10025 6 1.8928 high strength EN10025 6 1.8928 high strength S690QL steel plate is structural steel grade with good bending and welding properties. S690QL steel plate is always heat treated using the quench and temper process. In S690QL steel, the code “S” means structural steel; the code “Q”refers to the delivery condition, in this case to quenched & Tempered; the code “L” means that the average minimum values for impact S690 QL EN :2004 + A1:2009 Quenched and 1) The code “S” for steel grade S690QL means structural steel. 2) The code “Q” refers to the delivery condition, in this case to quenched and tempered. 3) Code “L” means that the average minimum values for impact energy have been defined at a temperature of 40°C.

Global Steel Price Recovery Is Now Under Threat

The most important differences between the supplies occur by the notch areas of FL + 1 mm. Generally, on the FL + 1 mm, the material S700MC-2 has the best absorbed energies, although the energies are evidently delicate to the warmth input. At the FL + 1 mm, the influence toughness of the Q&T S690QL is similar to the TMCP steels solely with the bottom heat input and with greater heat inputs, the impact energies of S690QL drop severely in comparison with the other steels.

Hot rolled structural plate steels with yield energy of 700 MPa are an excellent choice for quite a lot of demanding functions that require excellent toughness and welding properties. SSAB has developed novel hot-rolled plate steels which might be produced utilizing precision controlled rolling and an innovative cooling and tempering technique that ensures invariable mechanical properties within the width and the length directions of the plate. The recently developed steel meets or exceeds the requirements of EN for the S690QL grade. The minimal yield energy is between 630 MPa and 690 MPa relying on plate the thickness, and the interval of tensile strength is MPa, whereas the minimum elongation at fracture is 14 %. Further, an impact energy of 69 J at-40 °C on transverse V-notch specimen is assured.

  • Retaining this mix of properties in the weld zone is a major challenge for purposes in high-demanding structural building.
  • This work investigates the weldability of three completely different fashionable high energy metal plates, with a thickness of 8 mm.
  • The fashionable high strength metal plates have a superb combination of energy and toughness based on micro-alloying and sophisticated microstructure.
  • Two-passes MAG welding was used with four completely different warmth inputs.

The current environmental laws require buildings with lighter weight and improved efficiency. Steel is one of the most essential structural supplies worldwide, and due to this fact the developments in structural steel have a worldwide industrial influence. When producing sturdy constructions from the steel, weldability is a vital materials property as a result of most constructions require welding in some point of the manufacturing chain. Recently, the weldability of a excessive strength steel has been improved based mostly on the flexibility to realize high yield energy also with low carbon content material.

Electron beam welding is fusion welding process, the place excessive velocity electrons impinge on material joint to be welded and kinetic energy of this electron is remodeled into heat upon influence to fuse the fabric. In the current work electron beam welding of 60 mm thick SAE 5137H steel is studied. Mechanical and metallurgical properties of electron beam welded joint of SAE 5137H were evaluated.

Most present analysis of nano-indentation check data assumes the pattern to behave as an isotropic, homogeneous body. In practice, engineering supplies similar to structural steels, titanium alloys and excessive energy aluminium alloys are multi-part metals with microstructural size scales that can be the same order of magnitude as the maximum achievable nano-indentation depth. This heterogeneity ends in appreciable scatter in the indentation load-displacement traces and complicates inverse analysis of this data. The method was applied to S355 structural metal bulk samples in addition to an autogenously electron beam welded pattern where there’s a local variation of material properties. In the paper the outcomes of metallographic examination and mechanical properties of electron beam welded joint of quenched and tempered metal grade S690QL are presented.

EN 10025-6 S690QL microstructure
Tagged on: