EN 10025-6 S890Q, also written S890 Q, EN10025-6 S890Q and steel number 1.8940, is a quenched and tempered structural steel with a specified minimum yield of 890 MPa at 3–50 mm and a Charpy test at −20 °C on EN 10025-6 S890Q. This data sheet summarizes the official public-reference values already disclosed on that official product page, together with labeled conventional physical properties where the standard is silent.

EN 10025-6 S890Q Data Sheet at a Glance

Item Published reference value / condition
Standard and quality EN 10025-6, Q (Charpy at −20 °C)
Steel number 1.8940
Delivery condition Quenched and tempered
ReH min, 3–50 / >50–100 / >100–125 mm 890 / 830 / 830 MPa
Rm, 3–50 / >50–125 mm 940–1100 / 880–1100 MPa
Elongation A min 11%
Impact, longitudinal KV min 40 J at 0 °C; 30 J at −20 °C
Carbon, heat analysis max 0.20%
P / S, heat analysis max 0.025% / 0.015%
CEV (EN 10025-6:2019, official wording) Maxima rise with thickness, starting at 0.72 for plates up to 50 mm; use the mill-certificate value
Conventional density 7850 kg/m³ (EN 1993-1-1 Table 3.1; not an EN 10025-6 specified limit)

EN 10025-6 S890Q Mechanical Properties

Thickness (mm) Yield strength ReH min (MPa) Tensile strength Rm (MPa) Elongation A min (%)
3–50 890 940–1100 11
>50–100 830 880–1100 11
>100–125 (2019 edition row) 830 880–1100 11

The official mechanical table includes a >100–125 mm row from EN 10025-6:2019. The earlier 2004+A1 edition specified S890 grades only up to 100 mm, so state the edition on the order and confirm the guaranteed value for the actual thickness on the mill certificate. EN 10025-6 S890QL and EN 10025-6 S890QL1 keep the same official yield and tensile table and change the guaranteed impact temperature to −40 °C or −60 °C, with lower official phosphorus and sulfur maxima. They are different toughness qualities, not higher-strength grades. Official-page remarks that compare S890Q with commercial 900 MPa brands such as Strenx 900 (formerly Weldox 900) are strength-class notes, not substitutions.

Frequently Asked Questions (FAQ)

Where can I find an EN 10025-6 S890Q data sheet?

The official product values used here are those already published on EN 10025-6 S890Q. This page restates those tables for the long-tail data-sheet title and labels conventional physical figures separately.

Does EN 10025-6 S890Q have the same thickness coverage as EN 10025-6 S690Q?

Not in the official tables used here. The official S890 table runs to 125 mm in the 2019 edition, and the 2004+A1 edition specified S890 grades only up to 100 mm. EN 10025-6 S690Q is tabulated to 150 mm in the 2004+A1 steps used on its official page.

Does an EN 10025-6 S890Q data sheet include a specified hardness?

No. EN 10025-6 and EN 10025-6 S890Q publish yield, tensile, elongation and impact values, not a hardness requirement.

For plate to EN 10025-6 S890Q (1.8940), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.

EN 10025-6 S890Q Data Sheet
Tagged on: