EN 10025-6 S620Q lightweight steel

Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal grade S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive : EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.

Ladle evaluation,else the low temperature of impacting take a look at for S620Q steel plate and sheets should be accomplished . under minus 20 centi degree.For these three metal grades S620QL1,S620QL,S620Q shall be beneath Quenched . S690QL1 structural metal plates are formed after undergoing the quench and mood therapy. The remedy purifies the plate, resulting in a stiff but light – steel plate, prepared for use in extreme- areas requiring low weighing supplies for structural assist.

  • S690QL High Strength Steel Plate Exporter, S690QL Structural Steel Plates Stockists in India, S690QL HSLA Plate, S690QL High Yield Steel Plate Supplier in Mumbai.
  • Additionally, it is having a higher capability to be totally proof against corrosion, pitting, stress corrosion cracking, erosion, crevice corrosion, abrasion, and erosion and so forth.
  • As the plate’s manufacturing is accomplished by making good use of optimum top quality of alloy, it tends to supply many good properties.
  • As the plates manufacturing is finished by making good use of optimum high quality of alloy, it tends to produce many good properties.

ASTM A516 is the usual specification for making pressure vessels , material in carbon metal for average and lower temperature services, it will improve the notch toughness of the steel during the welding work. For constructional steelwork even plates of 120 mm have been produced and utilized successfully particularly in bridges. Conquest Steel and Alloys, the suppliers of Stainless Steel plates, provide a broad range of S690QL1 Steel Plates, a longtime juggernaut in bearing acute lots of and opposing abrasive erosion. API 5L X65 PSL1 Pipe is a high yield seamless pipe that is modified to suit offshore structural purposes. It is meant to be used in fastened offshore structures and is designed to function in the offshore sector. 09CuPCrNi-A is a weather resistant steel created by alloying copper, chromium and nickel.

EN 10025-6 S620Q-strength class 10.9 steel hex head screw

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: Admin@gangsteel.com
Phone: TEL: 0086-13598879167

We produce and export EN S620Q high strength steel plate to max thickness 300mm
We have 3000tons High strength stock list steel plate, Faster delivery, Competitive price,

S460Q S460QL and S460QL1 excessive yield power structural steels grade within the quenched and and . Gangsteel provide EN metal grade specification is a excessive yield energy structural steels in the quenched and tempered condition metallic plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. Hot rolled merchandise of structural steels Technical delivery circumstances for flat merchandise of high yield energy structural steels in the quenched and tempered situation of this doc, along with half 1, specifies requirements for flat products of excessive yield power alloy explicit steels. EN S620Q S620 Q STEEL PLATE BBNSTEEL Grade EN S620Q Specification THK 3 to 300,Width 1500 to 4050,Length 3000 to Standard Technical delivery conditions for flat products of excessive yield strength structuralEN S620Q Carbon and Low-alloy High-strength SteelEN S620Q Carbon and Low-alloy High-energy Steel Plate.WHY CHOOSE US? However, as far as chemical and mechanical properties of the outlined metal grades are concerned, these components don’t current massive adjustments compared to the former necessities EN and 10137. Nevertheless, this article focuses on the high power metal plate grades that are at current utilized in metallic constructing in Europe although we all know that engineers on this field can income tons from the good expertise made in branches.
The grades and qualities are given in Tables 2 to four and Tables 5 to 7 and are supplied throughout the quenched and tempered state of affairs as given in 6.three. The steels specified in this doc are applicable to hot-rolled flat merchandise with a minimum nominal thickness of 3 mm and a maximum nominal thickness of 200 mm for grades S460, S500, S550, S620 and S690, a most nominal thickness of one hundred twenty five mm for grades S890 and S960, in steels which, after quenching and tempering, have a specified minimum yield energy of 460 MPa to 960 MPa. Unitedsteel Plate Factory are specialised in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and high power steel plate, heavy plate and extensive, heavy plate, Which is a big steel plate provider mill.

5. Implementation of flaw detection standards; China (JB4730 GB/T2970), the United States (A435, A577, A578), Japan (JISGo801, JISG0901), Germany SEL072, Britain BS5996, France NFA04-305, etc.

EN 10025-6 S620Q strength steel impact test
S355J2WP steel is a scorching rolled structural metal with anti-corrosion function, additionally called weathering metal and atmosphere corrosion resistance metal, underneath standard EN . ASTM A283 plate metal features low and intermediate tensile strength carbon steel plate of structural high quality. Depending on the thickness of the product and the manufacturing circumstances, the EN10025-6 S620Q steel plate supplier may add to the metal one or a number of alloying parts as much as the utmost values given so as to get hold of the specified properties. It may be seen that these excessive-energy steels present considerably higher Charpy-V values on the testing temperature than given in the usual (27 J at -50°C and 30 J at -40°C respectively).

With bigger mechanical power as never earlier than, our structural metallic plates, also called EN S690Q, we develop metal plates with enhanced toughness and minimal impression. Minimum values of influence vitality for impression checks on transverse V-notch test items for quenched and tempered metal, when the influence take a look at on transverse test pieces is agreed at the time of the order. S690QL1 metallic plate, better generally known as SUPRALSIM 690 is an ideal price vary metal plate, providing minimal yield energy of 690 MPa. For the 5690 grade the minimal bend radius is three.0 instances t with the axis of the bend within the transverse course and 4.0 times t inside the longitudinal path. For TM-materials up to S460M it was proven that a superficial heating as much as 950°C doesn’t affect the mechanical properties considerably, whereas for extra extreme heating circumstances as much as the middle of the plates a most of seven-hundred°C ought to be noticed.
S620QL steel plate

  1. What is EN 10025-6 S620Q steel plat?
    EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

  EN 10137-2: 1996 S620Q  Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels

  1. What is EN 10025-6 S620Q OR 1.8914 Chemical composition %   of   steel  EN 10025-6  S620Q (1.8914):   EN 10025-6-2004

C

Si

Mn

Ni

P

S

Cr

Mo

V

N

Nb

Ti

Cu

Zr

B

CEV

max   0.2

max   0.8

max   1.7

max   2

max   0.025

max   0.015

max   1.5

max   0.7

max   0.12

max   0.015

max   0.06

max   0.05

max   0.5

max   0.15

max   0.005

max   0.83

 

  1. What is Mechanical properties of   steel   EN 10025-6 S620Q (1.8914)?

Nominal thickness (mm):  

3 – 100

100 – 150

Rm – Tensile strength (MPa)

700-890

650-830

  1. What is Equivalent grades of   steel  EN10025-6 S620Q (1.8914)

EU
EN

Germany
DIN,WNr

France
AFNOR

European old
EN

S620Q

StE620V

E620TR

FeE620V

 

EN10025-6 EQUAL Grade stock list in China warehouse 

 

Grade

size mm

Thick mm

Wide mm

Long mm

Tons

Quantity

High-strength structural stee plate

BS960E

7*1600*11300

7

1600

11300

2.023

2

 

Q550CFD

16*2500*12000

16

2500

12000

3.768

1

 

Q550CFD

16*2500*12000

16

2500

12000

3.768

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q690CFD

30*2550*10640

30

2550

10640

6.39

1

 

SC960E

30*1550*5800

30

1550

5800

2.117

1

 

NQB-S690QL

20*1700*11000

20

1700

11000

2.936

1

 

BS700MCK2

8*1500*13000

8

1500

13000

1.227

1

 

BWELDY620QL6

12*2400*6220

12

2400

6220

1.406

1

 

BWELDY620QL6

12*2400*9000

12

2400

9000

2.035

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.239

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

5.181

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

1.884

4

 

BS700MCK2

10*1500*6000

10

1500

6000

2.12

1

 

BS700MCK2

10*1500*6000

10

1500

6000

0.707

1

 

BS700MCK2

10*1500*6000

10

1500

6000

0.706

1

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

2

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

1

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

1

 

BS700MCK2

12*1500*13000

12

1500

13000

1.837

1

 

BS700MCK2

12*1500*4000

12

1500

4000

1.696

1

 

BS700MCK2

12*1500*4000

12

1500

4000

4.522

1

 

BS700MCK2

12*1500*4000

12

1500

4000

4.522

1

EN 10025-6 S620Q-strength steel flange nut

We current the experimental-numerical evaluation of the affect of temperature on mechanical properties of structural excessive-power metal class S690QL. S355 structural grade carries minimum yield power of 355 N/mm²m, the JR designation confirms that the hyperlink for you metal has undergone longitudinal Chary V-Notch influence testing at 27J at room temperature. Structural steelworksbridges, bridge components, elements for offshore buildings. Pressure vesselsfixed and conveyable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature appropriate for heavy engineering works. It serves good resistivity in direction of crevice and pitting cracking subjected to impact hundreds.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified business Rexton steel & alloys are busy in supplying the superb and fascinating quality of S690QL PLATES globally. They are totally specializing in offering shoppers with the top notch quality of plates and other essential services. abs grade ah36 shipbuilding and offshore industries steel Has been devoted to the of export steel enterprise more than 10 years.
Numerical analyses and experimental comparisons had been utilized using three warmth enter values (10, 14, and 17 kJ/cm) to have the ability to predict the thermal fields during welding. Experimental evaluation was carried out of the microstructure and microhardness habits in several HAZ areas. Unitedsteel Mill Supply High power metal plate, and have varied inventory measurement, If you require high energy metal plate. Unitedsteel Mill Supply High energy steel plate, and have numerous inventory size, should you require excessive power metal plate, please contact us via Email to contact us.

EN 10025-6 S620Q strength steel grades chart

Equivalent grades of   steel   S620Q (1.8914)Equivalent grades of   steel   S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated

EN metal grade specification is a high yield power structural steels within the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. EN S460QL structural steel plates are European commonplace low alloy extreme power steel supplies. S460QL metal plates are primarily used for building and engineering buildings, corresponding to plant building, physique metal physique parts of bulldozers, loaders etc EN S690Q steel plate provider. all types of building equipment, bridges, ships and so forth.EN S460QL quenched and tempered metal plate Sell steel gradeS460Q metallic plate, S460QL steel plate, S460QL1 steel plate.
The minimum of 0,015 % applies to soluble aluminum, this worth is thought to be attained if the whole aluminum content is a minimum of 0,018 %; in case of dispute the soluble aluminum content shall be determined.

EN 10025-6 S620Q strength steel impact test