EN 10025-6 S690QL1, also written S690 QL1, EN10025-6 S690QL1 and steel number 1.8988, is a quenched and tempered structural steel. The composition figures below are official heat-analysis maxima already disclosed on EN 10025-6 S690QL1. They are maxima, not typical contents.
EN 10025-6 S690QL1 Chemical Composition (Heat Analysis, Maximum %)
| C | Si | Mn | P | S | N | B | Cr | Cu | Mo | Nb | Ni | Ti | V | Zr |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.20 | 0.80 | 1.70 | 0.020 | 0.010 | 0.015 | 0.005 | 1.50 | 0.50 | 0.70 | 0.06 | 2.0 | 0.05 | 0.12 | 0.15 |
The steel is fully killed and fine-grained. The mill chooses the actual alloy content within these limits, and the CEV of each heat is printed on the mill certificate. Official CEV wording on EN 10025-6 S690QL1 is that EN 10025-6:2019 maxima rise from 0.65 for plates up to 50 mm to 0.83 for the thickest plates. EN 10025-6 S690Q uses the same carbon, manganese and alloy maxima but allows higher phosphorus and sulfur (0.025% / 0.015%). EN 10025-6 S690QL uses the same QL1 chemistry maxima and the same official 690 / 650 / 630 MPa yield table, and is tested at −40 °C rather than −60 °C.
Frequently Asked Questions (FAQ)
What is the chemical composition of EN 10025-6 S690QL1?
Official heat-analysis maxima on EN 10025-6 S690QL1 include C 0.20%, Si 0.80%, Mn 1.70%, P 0.020%, S 0.010% and the alloy maxima in the table above. These are maxima, not typical heat results.
Does EN 10025-6 S690QL1 have a lower phosphorus and sulfur maximum than EN 10025-6 S690Q?
Yes. EN 10025-6 S690Q allows P 0.025% and S 0.015% maximum. S690QL1 uses 0.020% and 0.010%, the same official maxima as EN 10025-6 S690QL.
Is every element in the EN 10025-6 S690QL1 table required in the same amount in every heat?
No. The official table is a set of maxima. The mill chooses the actual alloy content within those limits, and the certificate reports the heat analysis and CEV.
For plate to EN 10025-6 S690QL1 (1.8988), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.
