EN 10025-6 S690QL1, also written S690 QL1, EN10025-6 S690QL1 and steel number 1.8988, is the −60 °C toughness quality of the 690 MPa quenched and tempered class. EN 10025-6 does not publish ASTM names as official equivalents, and the official EN 10025-6 S690QL1 equivalent table does not list an ASTM designation as a direct equivalent. That official table lists the European designation, withdrawn EN 10137-2, an approximate GB/T 16270 name, and commercial 700 MPa brands. This page records those official-page comparisons and, because ASTM A514 is a commonly asked 690 MPa class contrast, tabulates both sides for ASTM A514 Grade B without treating it as an official S690QL1 equivalent. Those other grades are not aliases of S690QL1 and not replacements.
EN 10025-6 S690QL1 vs ASTM A514 Grade B
| Property | EN 10025-6 S690QL1 (1.8988) | ASTM A514 Grade B |
|---|---|---|
| Standard / product | EN 10025-6 QL1 structural plate, quenched and tempered | ASTM A514/A514M Grade B, quenched and tempered structural alloy plate |
| Minimum yield | 690 MPa (3–50 mm); 650 MPa (>50–100 mm); 630 MPa (>100–150 mm) | 100 ksi [690 MPa], clipped to the Grade B maximum of 1¼ in. [32 mm] |
| Tensile strength | 770–940 MPa (3–50 mm) | 110–130 ksi [760–895 MPa] |
| Impact / hardness | Charpy 30 J min at −60 °C, longitudinal | Official Table 2 publishes 235–293 HBW to ¾ in. [20 mm] incl.; no Charpy row is published in that official Grade B table |
Official remarks on EN 10025-6 S690QL1 also cite GB/T 16270 Q690F only as an approximate strength-class name with a −60 °C impact class, and they name Strenx 700 (formerly Weldox 700), DILLIMAX 690 and N-A-XTRA 700 as approximate commercial brands, not EN designations. EN 10025-6 S690QL is the −40 °C quality in the same official strength table, not an ASTM equivalent. Do not treat any ASTM grade as a replacement for an S690QL1 order unless the design documents accept that substitution.
Frequently Asked Questions (FAQ)
Is there a direct ASTM equivalent for EN 10025-6 S690QL1?
Not on the official EN 10025-6 S690QL1 product page. That page lists EN 10025-6, withdrawn EN 10137-2, an approximate GB/T 16270 name and commercial 700 MPa brands, and it does not publish an ASTM designation as a direct equivalent.
How does EN 10025-6 S690QL1 compare with ASTM A514 Grade B?
Both have a 690 MPa / 100 ksi thin-plate yield class, but ASTM A514 Grade B is limited to 1¼ in. [32 mm] and does not carry the official S690QL1 −60 °C Charpy requirement. Thickness rules, chemistry and toughness bases differ.
Is Strenx 700 the ASTM equivalent of EN 10025-6 S690QL1?
No. Official wording is that Strenx 700 is an SSAB brand made to SSAB’s own data sheet, in the same strength class but not identical. Whether it can be used depends on the toughness level and approval required by the drawing or specification.
For plate to EN 10025-6 S690QL1 (1.8988), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.
