EN 10025-6 S890Q, also written S890 Q, EN10025-6 S890Q and steel number 1.8940, is a quenched and tempered structural steel. EN 10025-6 does not publish ASTM names as official equivalents, and the official EN 10025-6 S890Q equivalent table does not list an ASTM designation as a direct equivalent. This page records the official-page comparisons and, where a commonly asked ASTM grade is discussed, tabulates both sides without treating that grade as an S890Q equivalent.
EN 10025-6 S890Q Official-Page Equivalents
| Item | EN 10025-6 S890Q (1.8940) | EN 10025-6 S890QL (1.8983) |
|---|---|---|
| ReH min, 3–50 mm | 890 MPa | 890 MPa |
| Rm, 3–50 mm | 940–1100 MPa | 940–1100 MPa |
| Impact, longitudinal minimum | 30 J at −20 °C | 30 J at −40 °C |
| P / S heat maxima, % | 0.025 / 0.015 | 0.020 / 0.010 |
EN 10025-6 S890QL1 (1.8925) keeps the same official strength table and is impact tested at −60 °C. Official remarks also cite withdrawn EN 10137-2 for the same grade name and steel number, and they cite GB/T 16270 Q890D only as an approximate strength-class name with different limits. Commercial 900 MPa brands such as Strenx 900 (formerly Weldox 900), DILLIMAX 890 and XABO 890 are named on EN 10025-6 S890Q as approximate only, not as EN designations.
A Commonly Asked ASTM Comparison That Is Not an Official Equivalent
| Property | EN 10025-6 S890Q | ASTM A514 Grade B (strength-class contrast only) |
|---|---|---|
| Minimum yield, thin plate | 890 MPa (3–50 mm) | 100 ksi [690 MPa], clipped to the Grade B maximum of 1¼ in. [32 mm] |
| Tensile strength | 940–1100 MPa (3–50 mm) | 110–130 ksi [760–895 MPa] |
| Official ASTM remark on the S890Q page | No ASTM line is published as a direct equivalent on EN 10025-6 S890Q | A514 is a different, lower yield class than the official 890 MPa table |
A514 Grade B is tabulated only to show that a commonly named ASTM quenched and tempered grade is a different, lower strength class (100 ksi / 690 MPa). It is not an EN 10025-6 S890Q equivalent. Do not treat any ASTM grade or commercial 900 MPa brand as a replacement for an S890Q order unless the design documents accept that substitution.
Frequently Asked Questions (FAQ)
Is there a direct ASTM equivalent for EN 10025-6 S890Q?
Not on the official EN 10025-6 S890Q product page. That page lists EN 10025-6, withdrawn EN 10137-2, an approximate GB/T 16270 name and commercial 900 MPa brands, and it does not publish an ASTM designation as a direct equivalent.
Is ASTM A514 an equivalent for EN 10025-6 S890Q?
No. ASTM A514 Grade B has a 100 ksi [690 MPa] thin-plate yield, below the official 890 MPa S890Q class, and different chemistry, thickness and toughness rules.
Is Strenx 900 the same as EN 10025-6 S890Q?
No. Official wording is that they are in the same strength class but are not identical. Strenx 900 (formerly Weldox 900) is an SSAB brand made to SSAB’s own data sheet. Whether it can be used depends on the toughness level and approval required by the drawing or specification.
For plate to EN 10025-6 S890Q (1.8940), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.
