EN 10025-6 S890Q, also written S890 Q, EN10025-6 S890Q and steel number 1.8940, is a quenched and tempered structural steel whose name states an 890 MPa minimum yield in the thin-plate band. The official values below are those already disclosed on EN 10025-6 S890Q. Yield falls above 50 mm, so the grade name is not a single yield for every thickness.
EN 10025-6 S890Q Mechanical Properties
| Thickness (mm) | Yield strength ReH min (MPa) | Tensile strength Rm (MPa) | Elongation A min (%) |
|---|---|---|---|
| 3–50 | 890 | 940–1100 | 11 |
| >50–100 | 830 | 880–1100 | 11 |
| >100–125 (2019 edition row) | 830 | 880–1100 | 11 |
The official mechanical table includes a >100–125 mm row from EN 10025-6:2019. The earlier 2004+A1 edition specified S890 grades only up to 100 mm, so state the edition on the order and confirm the guaranteed value for the actual thickness on the mill certificate. The official FAQ wording on EN 10025-6 S890Q is that the minimum yield is 890 MPa up to 50 mm and 830 MPa above 50 mm. The Q quality is impact tested at −20 °C (30 J longitudinal minimum at that temperature, with a 40 J value at 0 °C). Heat-analysis maxima include C 0.20%, P 0.025% and S 0.015%. EN 10025-6 S890QL and EN 10025-6 S890QL1 keep the same official yield and tensile table and change the guaranteed impact temperature to −40 °C or −60 °C, with lower official phosphorus and sulfur maxima (0.020% / 0.010%). They are not higher-yield grades.
Frequently Asked Questions (FAQ)
What are the mechanical properties of EN 10025-6 S890Q?
On EN 10025-6 S890Q, the thin-plate yield is 890 MPa, the tensile range is 940–1100 MPa, elongation is 11% minimum, and longitudinal impact energy is 30 J minimum at −20 °C. Above 50 mm the official minimum yield is 830 MPa and the tensile range is 880–1100 MPa.
Does EN 10025-6 S890QL have a higher yield than EN 10025-6 S890Q?
No. EN 10025-6 S890QL uses the same official yield and tensile table. The QL quality changes toughness and the phosphorus and sulfur maxima, not the 890 MPa strength class.
Is the 890 MPa yield of EN 10025-6 S890Q valid at every thickness?
No. The official table reduces the minimum yield to 830 MPa above 50 mm. Confirm the edition, especially for the 2019 >100–125 mm row, on the mill certificate.
For plate to EN 10025-6 S890Q (1.8940), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.
