EN 10025-6 S690Q, also written S690 Q, EN10025-6 S690Q and steel number 1.8931, is a quenched and tempered structural steel whose Q quality is defined by a Charpy impact test at −20 °C. The impact values below are those already disclosed on EN 10025-6 S690Q. A Charpy test temperature is not a service-temperature rating.

EN 10025-6 S690Q Charpy Impact Test

Impact test (Charpy V-notch) 0 °C −20 °C
Longitudinal, KV min (J) 40 30
Transverse, KV min (J), if agreed 30 27

The Q quality is therefore guaranteed at −20 °C, 30 J longitudinal minimum, as tabulated on EN 10025-6 S690Q. Transverse values apply only if agreed. EN 10025-6 S690QL keeps the same official yield and tensile table (690 / 650 / 630 MPa and 770–940 / 760–930 / 710–900 MPa in the 2004+A1 bands, 14% elongation) and is impact tested at −40 °C, with official longitudinal minima of 50 J at 0 °C, 40 J at −20 °C and 30 J at −40 °C. QL does not automatically fill a Q order unless the project accepts the colder quality; Q does not automatically satisfy a QL order.

Official chemistry on the Q quality allows P 0.025% and S 0.015% maximum; the QL quality uses lower maxima. Choose the quality from the required test temperature and the design code, not from the 690 MPa yield class alone. Official-page remarks that compare S690Q with ASTM A514 / A517 or with commercial 700 MPa brands are strength-class notes only and do not change the specified Charpy table.

Frequently Asked Questions (FAQ)

What Charpy impact test applies to EN 10025-6 S690Q?

The official EN 10025-6 S690Q table is a Q-quality test at −20 °C, with 30 J longitudinal minimum at that temperature and 40 J at 0 °C. Transverse values are 27 J and 30 J at those temperatures only if agreed.

Is the −20 °C impact test of EN 10025-6 S690Q a service-temperature rating?

No. It is a test temperature for the Q quality. The minimum service temperature is a design-code decision, not a hidden EN 10025-6 rating.

Should EN 10025-6 S690QL be used instead of EN 10025-6 S690Q for colder service?

EN 10025-6 S690QL is the −40 °C quality in the same strength class. Use it when the project requires that colder test. It is not an automatic replacement for a specified S690Q order, and S690Q does not automatically satisfy a QL order.

For plate to EN 10025-6 S690Q (1.8931), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.

EN 10025-6 S690Q Charpy Impact Test
Tagged on: