EN 10025-6 S550Q, also written S550 Q, EN10025-6 S550Q and steel number 1.8904, is a quenched and tempered structural steel plate with a specified minimum yield of 550 MPa at 3–50 mm on EN 10025-6 S550Q. It is not a deformed high-yield reinforcing bar. The steel number 1.8924 that appears in some catalogue strings for this page is the official number of EN 10025-6 S500Q, a different 500 MPa grade, and is not the number of S550Q.
The mechanical values below are those already disclosed on EN 10025-6 S550Q. These thickness rows follow the EN 10025-6:2004+A1 edition used on the official product page. The 2019 edition revised the thickness steps for thicker plates, so state the edition on the order and confirm the guaranteed value for the actual thickness on the mill certificate.
What This Page Covers
| Topic | Position used on this page |
|---|---|
| Product | EN 10025-6 S550Q quenched and tempered structural plate, official page EN 10025-6 S550Q |
| Steel number | 1.8904 for S550Q. 1.8924 identifies S500Q, not S550Q |
| Deformed high-yield bars | A different product family (reinforcing bars), not the scope of EN 10025-6 plate |
| Thin-plate yield | 550 MPa min at 3–50 mm, falling in the official thicker bands |
EN 10025-6 S550Q Mechanical Properties
| Thickness (mm), 2004+A1 steps used on the official page | Yield strength ReH min (MPa) | Tensile strength Rm (MPa) | Elongation A min (%) |
|---|---|---|---|
| 3–50 | 550 | 640–820 | 16 |
| >50–100 | 530 | 640–820 | 16 |
| >100–150 | 490 | 590–770 | 16 |
The Q quality is impact tested at −20 °C (30 J longitudinal minimum at that temperature, with a 40 J value at 0 °C, as tabulated on the official page). EN 10025-6 S550QL and EN 10025-6 S550QL1 keep the same yield and tensile table and change the guaranteed impact temperature to −40 °C or −60 °C. They are different toughness qualities, not higher-strength grades and not automatic replacements for S550Q.
Frequently Asked Questions (FAQ)
Is EN 10025-6 S550Q a deformed high-yield steel bar?
No. EN 10025-6 S550Q is quenched and tempered structural plate. Deformed high-yield bars are specified under reinforcing-bar standards, not as EN 10025-6 plate.
Is 1.8924 the steel number for EN 10025-6 S550Q?
No. The official steel number for S550Q is 1.8904. 1.8924 is the official number of EN 10025-6 S500Q.
What is the minimum yield strength of EN 10025-6 S550Q?
550 MPa for 3–50 mm, 530 MPa above 50–100 mm, and 490 MPa above 100–150 mm, using the 2004+A1 thickness steps published on EN 10025-6 S550Q.
For plate to EN 10025-6 S550Q (1.8904), Please contact Gangsteel with the designation, edition, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our carbon and high-strength steel plate at Gangsteel.
