ASTM A516 Grade 60, also commonly written as A516GR.60, A516 Gr.60, A516 GR 60 and ASTM A516/A516M Grade 60 [Grade 415], is the inch-pound Grade 60 designation in ASTM A516/A516M. Grade 415 is the SI designation in the same specification, not a converted Grade 60 value. ASME SA516 Grade 60 (SA-516 or SA-516M Grade 60 or Grade 415) is the corresponding ASME family designation, not merely another spelling of the ASTM name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASTM A516 Grade 60.
This page covers welding of ASTM A516 Grade 60 plate: weldability, P-Number and Group Number used in ASME Section IX qualification, carbon-equivalent practice, and why preheat and postweld heat treatment must come from the qualified WPS and the construction code — not from an assumed A516 default table. A516/A516M itself does not specify a weldability index, a preheat temperature or a consumable classification.
Weldability of ASTM A516 Grade 60
Grade 60 is a killed carbon-manganese vessel plate and is generally regarded as readily weldable with common fusion-welding processes when the WPS is qualified for the project. The ASME SA-516 Grade 60 designation used in many Section IX and Section VIII applications, ASME SA516 Grade 60, is P-No. 1 Group 1 on public cross-checks of QW/QB-422 and related ASME Section IX listings (CIS permitted Table 1A reprint, OpenExamPrep QW/QB-422, and metals-piping compilations). P-Number and Group Number are qualification grouping tools; they are not a standing WPS, a hardness limit or a preheat table.
Related A516 grades — ASTM A516 Grade 65 and ASTM A516 Grade 70 — are not automatically the same P-Number/Group Number as Grade 60 and must be confirmed on the edition in force. Do not treat a web claim about a different grade as a Grade 60 welding rule.
What Is Specified and What Is Practice
| Topic | Position used on this page |
|---|---|
| A516/A516M specified welding rules | None. The specification does not set a CEV maximum, a preheat temperature, a consumable classification or a PWHT cycle |
| P-Number / Group Number | SA-516 Grade 60 is P-No. 1 Group 1 on the public Section IX listings cited above, confirmed against the edition in force. Grouping is not a completed WPS |
| Typical mill CEV (IIW) | SSAB Grade 60 datasheet: typical 0.44 wt% for 0.100–3.54 in.; optional maximums 0.43 (up to 1.25 in.) and 0.45 (up to 1.5 in.) when those options are ordered. Mill typical/optional figures, not A516 limits |
| Preheat and consumables | From the qualified WPS and the construction code. Low-hydrogen consumables (for example AWS A5.1 E7018 for SMAW) are common practice, not an A516 mandate. A quoted 100–150 °C (212–302 °F) band is not a specification requirement |
| Postweld heat treatment | When required by the qualified WPS and the construction code (including UCS-56 when Section VIII Division 1 applies). This page does not publish an unsourced thickness cutoff as an A516 rule |
Carbon Equivalent (Typical Mill Figures, Not an A516 Limit)
ASTM A516/A516M does not publish a specified carbon-equivalent maximum for Grade 60. When a carbon equivalent is calculated, the IIW formula is the usual basis:
CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15, with element contents in weight percent.
SSAB’s ASTM A516 Grade 60 product datasheet lists a typical CEV of 0.44 wt% for plates in the 0.100–3.54 in. range offered by that mill, and optional CEV maximums of 0.43 (up to 1.25 in.) and 0.45 (up to 1.5 in.) when those tighter options are ordered. Those figures are one producer’s typical and optional values, not ASTM A516 specified limits and not a Gangsteel guarantee of every heat. If a carbon-equivalent ceiling is needed, write it on the purchase order and confirm it on the material report.
Preheat, Consumables and Postweld Heat Treatment
There is no official A516 Grade 60 preheat table. For ASME pressure-vessel work, preheat, interpass temperature, consumables and PWHT come from the qualified ASME Section IX WPS and from the construction code applied to the vessel (including any PWHT or exemption rules such as UCS-56 when Section VIII Division 1 applies). AWS D1.1 prequalified minimum preheats apply only when that structural code and a prequalified WPS are actually being used; they are not automatic ASME vessel requirements and are not restated here as Grade 60 limits.
Common fabricator practice for this carbon-manganese plate, described in supplier welding notes, is to use low-hydrogen consumables (for example AWS A5.1 E7018 for SMAW) and to introduce preheat on thicker or highly restrained joints. Those notes are practice comments, not A516 mandated temperatures. Do not treat a quoted 100–150 °C (212–302 °F) band as a specification requirement.
Delivery condition still matters for fabrication planning. Public compilations and the SSAB Grade 60 datasheet, as already used on ASTM A516 Grade 60, indicate that plates over 1.50 in. [40 mm] are supplied normalized unless otherwise agreed, while thinner plate is commonly as-rolled unless otherwise ordered or unless notch toughness is specified. Normalized and as-rolled plates of the same chemistry still need a WPS that covers the delivered condition.
Frequently Asked Questions (FAQ)
Does ASTM A516 Grade 60 have a specified carbon-equivalent limit?
No. ASTM A516/A516M does not publish a Grade 60 CEV maximum. The 0.44 wt% typical CEV and the optional 0.43 / 0.45 maximums cited above are SSAB mill figures, not A516 specification limits.
What is the P-Number for ASME SA516 Grade 60 or ASTM A516 Grade 60?
Public Section IX listings used on related Gangsteel pages place SA-516 Grade 60 in P-No. 1 Group 1. Confirm the edition in force for the WPS. P-Number grouping is not, by itself, a completed welding procedure.
Can a preheat temperature be taken directly from the ASTM A516 Grade 60 specification?
No. A516 does not specify preheat. Use the qualified WPS and the construction code. AWS D1.1 tables apply only when that code is the welding basis.
Where should welding requirements for ASTM A516 Grade 60 be confirmed?
Start with the official product page, ASTM A516 Grade 60, and the WPS and construction code for the job. Use ASME SA516 Grade 60 when the plate order is written to the ASME designation.
For plate to ASTM A516/A516M Grade 60 [Grade 415] or ASME SA-516 Grade 60, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.
