ASME SA516 Grade 65, also commonly written as SA516GR.65, SA-516 Grade 65, SA516 GR 65 and ASME SA-516/SA-516M Grade 65 [Grade 450], is the ASME family designation corresponding to ASTM A516/A516M Grade 65 [Grade 450]. Grade 450 is the SI designation in the same family, not a converted Grade 65 value. ASTM A516 Grade 65 is the corresponding ASTM designation, not merely another spelling of the ASME name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASME SA516 Grade 65.
This page answers the “equivalent” question for ASME SA516 Grade 65. There is no single interchangeable equivalent. The corresponding ASTM designation is ASTM A516 Grade 65. In European practice, EN 10028-2 P295GH (1.0481) is an approximate counterpart often listed alongside Grade 65, but chemistry, yield, elevated-temperature properties, impact rules and delivery condition differ, so it is not a direct substitute. Historical names such as DIN 17155 17Mn4 are predecessors, not current order grades. Do not use P355GH or other informal Grade 70 comparisons as Grade 65 equals.
Corresponding, Related and Approximate Designations
| Designation | How it relates to ASME SA516 Grade 65 | Published figures (public reference / official page) |
|---|---|---|
| ASTM A516 Grade 65 | Corresponding ASTM designation in the same grade family. Dual certification is an order agreement, not automatic | 65–85 ksi / 450–585 MPa tensile; 35 ksi minimum yield; 23% in 2 in. and 19% in 8 in. 35 ksi is not published here as 240 MPa or as an official SI specification value |
| EN 10028-2 P295GH (1.0481) | Approximate counterpart in a Salzgitter Flachstahl public correspondence grouping with A516 Grade 65, not a direct substitute. EN 10028-2 is written for steels with specified elevated-temperature properties; SA-516 Grade 65 is for moderate- and lower-temperature service where notch toughness matters | Official EN 10028-2:2017 public-reference values used on the official P295GH page: C 0.08–0.20, Mn 0.90–1.50, usual delivery +N; tensile 460–580 MPa at t ≤ 100 mm (then 440–570 / 430–570 mm bands); yield 295 / 290 / 285 / 260 / 235 / 220 MPa by thickness band to 250 mm; elongation 21%; plus specified Table 4 Rp0.2 values. Tensile ranges are close (460–580 vs 450–585) but not identical; thin-plate yield 295 MPa is not the Grade 65 35 ksi minimum |
| DIN 17155 17Mn4 (historical) | Historical predecessor of the P295GH group in the same mill correspondence table, not a current substitute | Do not order 17Mn4 as if it replaced ASME SA516 Grade 65. Numerical DIN 17155 limits are not republished here as a current acceptance table |
| ASME SA515 Grade 65 / ASTM A515 Grade 65 | Related grade number, not a counterpart for the same service | Same public-Scope tensile range 65–85 ksi [450–585 MPa], but carbon-silicon plate for intermediate- and higher-temperature service, made to a coarse-grain practice |
| ASME SA516 Grade 60 / ASTM A516 Grade 70 | Different strength grades in the same SA-516/A516 family, not substitutes | Grade 60: 60–80 ksi, 32 ksi yield, 25%/21% elongation. Grade 70: 70–90 ksi, 38 ksi yield, as used on the official Grade 70 page |
Accept any alternative only after project review of chemistry, design temperature, impact rules, delivery condition and the accepting Code. Official EN text was not purchased; the P295GH figures above are those already used on the official Gangsteel P295GH product page.
Frequently Asked Questions (FAQ)
What is the equivalent of ASME SA516 Grade 65?
There is no single interchangeable equivalent. The corresponding ASTM name is ASTM A516 Grade 65. EN 10028-2 P295GH is an approximate counterpart often listed alongside Grade 65, but it is not a direct substitute.
Is EN 10028-2 P295GH the same as ASME SA516 Grade 65?
No. Tensile ranges are close (460–580 MPa vs 450–585 MPa) but not the same. P295GH has a carbon range of 0.08–0.20% and a 295 MPa yield at ≤ 16 mm; Grade 65 uses thickness-banded carbon maxima and a 35 ksi inch-pound minimum yield. P295GH also carries specified elevated-temperature proof strength.
Is ASTM A516 Grade 65 the same as ASME SA516 Grade 65?
They are corresponding family designations, not interchangeable certificates. Use ASME SA516 Grade 65 when the order is written to the ASME name.
Is ASME SA515 Grade 65 the same as ASME SA516 Grade 65?
No. They share a grade number and the same public-Scope tensile range, but the service-temperature basis and grain practice differ.
For plate to ASTM A516/A516M Grade 65 [Grade 450] or ASME SA-516 Grade 65, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.
