ASME SA285 Grade B, also commonly written as SA285GR.B, SA-285 Grade B, SA 285 GR B and ASME SA-285/SA-285M Grade B, is the ASME family designation corresponding to ASTM A285/A285M Grade B. ASTM A285 Grade B is the corresponding ASTM designation, not merely another spelling of the ASME name. An ASTM-only certificate does not automatically satisfy a specified SA-285 order, and the reverse is also true. There is no separate official SA-285 product page on this site; the official public-reference values used here are those already disclosed on ASTM A285 Grade B.
This page compares ASME SA285 Grade B / ASTM A285 Grade B with Grades A and C and with related carbon-steel plates often asked about as equivalents. Those other grades are comparison candidates, not aliases of SA285 Grade B and not automatic replacements. Grade B is the middle tensile level in A285/A285M-24.
ASME SA285 Grade B Equivalents at a Glance
| Property | SA285 / ASTM A285 Grade B | ASTM A285 Grade A |
|---|---|---|
| Tensile strength | 50–70 ksi [345–485 MPa] | 45–65 ksi [310–450 MPa] |
| Minimum yield strength | 27 ksi [185 MPa] | 24 ksi [165 MPa] |
| Elongation, min., 8 in. [200 mm] / 2 in. [50 mm] | 25% / 28% | 27% / 30% |
| Carbon, heat and product reference, max % | 0.22 | 0.17 |
| Property | SA285 / ASTM A285 Grade B | ASTM A285 Grade C |
|---|---|---|
| Tensile strength | 50–70 ksi [345–485 MPa] | 55–75 ksi [380–515 MPa] |
| Minimum yield strength | 27 ksi [185 MPa] | 30 ksi [205 MPa] |
| Elongation, min., 8 in. [200 mm] / 2 in. [50 mm] | 25% / 28% | 23% / 27% |
| Carbon, heat and product reference, max % | 0.22 | 0.28 |
Inch-pound and SI figures in the same official Scope cell are independently standard. Yield and elongation are public-compilation values used on the official A285 pages, with applicable A20 adjustments. Manganese is 0.90% heat / 0.98% product for Grades A, B and C. Phosphorus and sulfur are 0.025% compilation maxima; confirm the ordered edition. Silicon is not assigned a numeric limit in the official chemistry tables checked here. Usual delivery is normally as-rolled; that is not a mandatory normalizing requirement.
Related Specifications That Are Not Equivalents
| Property | SA285 / ASTM A285 Grade B | ASTM A283 Grade C (structural, not a vessel-grade equivalent) |
|---|---|---|
| Tensile strength | 50–70 ksi [345–485 MPa] | 55–75 ksi [380–515 MPa] |
| Minimum yield strength | 27 ksi [185 MPa] | 30 ksi [205 MPa] |
| Elongation, min., 2 in. [50 mm] / 8 in. [200 mm] | 28% / 25% | 25% / 22% |
| Intended product | Fusion-welded pressure-vessel plate, killed or semi-killed | Structural carbon plate; official A285 wording does not treat it as a vessel-material equivalent |
Scope Note 1 points killed-only buyers toward A299, A515 or A516, but that is not authorization to substitute. ASTM A515 Grade 70 and ASTM A516 Grade 70 have public tensile ranges of 70–90 ksi [485–620 MPa] and a 38 ksi yield compilation, which are not Grade B equivalents.
Frequently Asked Questions (FAQ)
Is ASME SA285 Grade B the same steel as ASTM A285 Grade B?
They are corresponding ASME and ASTM family designations, not interchangeable certificates. Use the official ASTM A285 Grade B values when comparing chemistry and strength, and match the name written on the order.
Can ASME SA285 Grade A or Grade C replace ASME SA285 Grade B?
No. Grade A has a lower specified tensile window; Grade C has a higher window and a higher carbon maximum. Neighbouring A285 grades are not replacements for Grade B unless the design and purchase documents are formally revised.
Is ASTM A283 Grade C an equivalent for ASME SA285 Grade B?
No. ASTM A283 Grade C is a structural designation. Official A285 wording states that an A283 structural plate is not a vessel-grade equivalent.
For plate to ASME SA-285 Grade B or ASTM A285/A285M Grade B, Please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.
