ASME SA285 Grade A, also commonly written as SA285GR.A, SA-285 Grade A, SA 285 GR A and ASME SA-285/SA-285M Grade A, is the ASME family designation corresponding to ASTM A285/A285M Grade A. ASTM A285 Grade A is the corresponding ASTM designation, not merely another spelling of the ASME name. An ASTM-only certificate does not automatically satisfy a specified SA-285 order, and the reverse is also true. There is no separate official SA-285 product page on this site; the official public-reference values used here are those already disclosed on ASTM A285 Grade A.
This page compares ASME SA285 Grade A / ASTM A285 Grade A with the neighbouring A285 grades and with related carbon-steel plates that are often asked about as equivalents. Those other grades are comparison candidates, not aliases of SA285 Grade A and not automatic replacements. SA-285 / A285 Grade A remains the lowest specified tensile range in A285/A285M-24.
ASME SA285 Grade A Equivalents at a Glance
| Property | SA285 / ASTM A285 Grade A | ASTM A285 Grade B |
|---|---|---|
| Tensile strength | 45–65 ksi [310–450 MPa] | 50–70 ksi [345–485 MPa] |
| Minimum yield strength | 24 ksi [165 MPa] | 27 ksi [185 MPa] |
| Elongation, min., 8 in. [200 mm] / 2 in. [50 mm] | 27% / 30% | 25% / 28% |
| Carbon, heat and product reference, max % | 0.17 | 0.22 |
| Property | SA285 / ASTM A285 Grade A | ASTM A285 Grade C |
|---|---|---|
| Tensile strength | 45–65 ksi [310–450 MPa] | 55–75 ksi [380–515 MPa] |
| Minimum yield strength | 24 ksi [165 MPa] | 30 ksi [205 MPa] |
| Elongation, min., 8 in. [200 mm] / 2 in. [50 mm] | 27% / 30% | 23% / 27% |
| Carbon, heat and product reference, max % | 0.17 | 0.28 |
Inch-pound and SI figures in the same official Scope cell are independently standard, not exact conversions of one another. Yield and elongation are public-compilation values used on the official A285 pages, with applicable A20 adjustments. Manganese is 0.90% heat / 0.98% product in those same tables for Grades A, B and C. Phosphorus and sulfur are 0.025% compilation maxima; confirm the ordered edition. Silicon is not assigned a numeric limit in the chemistry tables checked on the official pages.
Related Specifications That Are Not Equivalents
| Property | SA285 / ASTM A285 Grade A | ASTM A283 Grade C (structural, not a vessel-grade equivalent) |
|---|---|---|
| Tensile strength | 45–65 ksi [310–450 MPa] | 55–75 ksi [380–515 MPa] |
| Minimum yield strength | 24 ksi [165 MPa] | 30 ksi [205 MPa] |
| Elongation, min., 2 in. [50 mm] / 8 in. [200 mm] | 30% / 27% | 25% / 22% |
| Intended product | Fusion-welded pressure-vessel plate, killed or semi-killed | Structural carbon plate; official A285 wording does not treat it as a vessel-material equivalent |
A285/A285M Scope Note 1 directs buyers who require killed carbon steel only toward A299, A515 or A516. That pointer is not interchangeability. ASTM A515 Grade 70 and ASTM A516 Grade 70 are different vessel specifications, with public tensile ranges of 70–90 ksi [485–620 MPa] and a 38 ksi yield compilation, not Grade A equivalents.
Frequently Asked Questions (FAQ)
Is ASME SA285 Grade A the same steel as ASTM A285 Grade A?
They are corresponding ASME and ASTM family designations, not interchangeable certificates. Use the official ASTM A285 Grade A values when comparing chemistry and strength, and match the name written on the order.
Can ASME SA285 Grade B or Grade C replace ASME SA285 Grade A?
No. Grades B and C have higher specified tensile windows and different carbon maxima. A stronger neighbouring grade is not a replacement for Grade A unless the design and purchase documents are formally revised.
Is ASTM A283 Grade C an equivalent for ASME SA285 Grade A?
No. ASTM A283 Grade C is a structural designation. Official A285 wording states that an A283 structural plate is not a vessel-grade equivalent, even where some strength numbers appear close to a higher A285 grade.
For plate to ASME SA-285 Grade A or ASTM A285/A285M Grade A, Please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.
