en 10025-6 s890ql steel plate 4mm manufacturer

Gangsteel Sell EN 10025-6 S890QL Extra High Strength Steel Plate and export EN10025-6 S890QL Quenched and Tempered Structural Steel IN China.What is EN 10025-6 Grade? S890QL Grade Designation , S = Structural Steel, 890 = minimum yield strength (MPa), Q = Quenching & Tempering and L = Low notch toughness testing temperatures

es

s890ql DNV BV GL LR steel plate,s890ql steel equivalent,s890ql steel plate,s890ql mechanical properties,s890ql properties,s890ql datenblatt,s890ql steel price,s890ql schweißen,en 10025-6 s890ql,welding s890ql,s890ql steel cutting parts,s890ql chemical and property,acier s890ql,s890ql werkstoff,s890ql hardness,s890ql equivalent,s890ql werkstoff datenblatt,s890ql datasheet,acciaio s890ql,s890ql material,blacha s890ql,s890ql steel stocklist,s890ql equivalent,s890ql equivalent steel,s890ql steel equivalent,s890ql steel platesteel plate,en 10025-6 s890ql steel plates manufacturer,en 10025-6 s890ql weight of steel plate manufacturer,en 10025-6 s890ql steel plate weight manufacturer,en 10025-6 s890ql steel plate prices manufacturer

First specified within the European EN10025 commonplace and later revealed by the British Standards Institure as BS EN S355, S355J2 and S355J2 N. These requirements superceded the BS4360 grades. The common minimum yield for this material is 355 N/mm², therefore the name S355. Manufacturer of High Tensile Plates Strenx seven-hundred S690ql Weldox En High Tensile Steel Plates offered by Champak Industries, Mumbai, Maharashtra.

en 10025-6 s890ql 4 x 8 steel plate manufacturer

West Yorkshire Steel are suppliers of S355 grades in metal plate, round bar and flat bar. As an unalloyed low carbon metal grade S355 is equipped in the sizzling rolled and chilly drawn situations. DILLIMAX 1100 is a excessive power quenched and tempered, fine grained structural steel with a minimal yield power of 1100 MPa in its supply situation ex works.

en 10025-6 s890ql steel plate weight calculator manufacturer,en 10025-6 s890ql steel plate for sale manufacturer,en 10025-6 s890ql steel plate 1/4 manufacturer,en 10025-6 s890ql steel plate armor manufacturer,en 10025-6 s890ql steel plate thickness manufacturer,en 10025-6 s890ql steel plate 1/8 manufacturer,en 10025-6 s890ql steel plate 3/16 manufacturer,en 10025-6 s890ql 3/16 steel plate manufacturer,en 10025-6 s890ql 1/8 steel plate manufacturer,en 10025-6 s890ql steel name plates manufacturer,en 10025-6 s890ql steel plate on road manufacturer,en 10025-6 s890ql steel plate 1/2 manufacturer,en 10025-6 s890ql steel plate sizes manufacturer,en 10025-6 s890ql 1/2 steel plate manufacturer

en 10025-6 s890ql d mart steel plates manufacturer

The thickness is for indication solely however we will normally have thicker plates obtainable in most grades. The entire processing and application methods are of fundamental importance to the reliability of the merchandise produced from this steel. The consumer ought to make sure that his design, building and processing methods are aligned with the material EN10025-6 S890QL Steel supplier, correspond to the state-of-the-art that the fabricator has to adjust to and are appropriate for the supposed use. It must be respected, that with greater yield energy the notch- and fatigue sensibility is increased for the bottom and weld materials. This will typically imply greater requirements for the development and the quality of welds.

en 10025-6 s890ql steel plate door manufacturer

Our merchandise are available in customizable choices like size, thickness and finishing to fulfill buyer centric demands. In order to ensure that the tensile energy of the weld metal fulfils the requirements of the bottom metal, the heat input and interpass temperature must be limited during welding. Experience has shown that the welding situations ought to be chosen in order that the cooling time t 8/5 does not exceed 12 seconds. S890QL1 can be cold fashioned with regard to its excessive yield power.

Delivery conditions of s890q, s890ql, and s890ql1 steel plates. Quenching + tempering (q). Note: direct quenching followed by tempering after hot rolling is equivalent to conventional quenching and tempering.6. Impact properties of s890q, s890ql, and s890ql1 steel plates and S890q at – 20 ��, s890ql at – 50 ��, s890ql at – 60 ��

S890QL is extra high strength steel to EN10025-6:2004, and the steel number is 1.8983. S890QL has a minimum yield strength of 890Mpa in quenched and tempered conditions; with its low temperature of -40 ºC, this steel grade performs good durability in extreme working environments.

en 10025-6 s890ql steel plates manufacturer

en 10025-6 s890ql steel plates Mechanical Properties

Plate Thickness
MM

Yield
Strength ReH(Mpa)

Tensile Strength Rm(Mpa)

Elongation
A5%
Minimum

3 to 50

890

940~1100

11

> 50 to 100

830

880~1100

11

Technical conditions for s890q, s890ql and s890ql1 steel plates
1. S890 steel plate is a quenched and tempered high strength steel plate with series grades of s890q, s890ql and s890ql1. It is a low carbon non alloy structural steel plate with European standard en10025-6. It can be produced by Wuyang Iron and steel company in China. In order to ensure its performance, the carbon content of this kind of steel plate is less than 0.2%.
2. S890q, s890ql and s890ql1 steel plates, where s means structural steel, Q means impact temperature of steel plate is – 20 ° C,Then QL means the impact temperature of the steel plate is – 50 ° C. guess what ql1 stands for, ql1 means the impact temperature of the steel plate is – 60 ° C, 890 means the minimum yield strength value specified by the thickness of (50 mm),
Chemical Composition – EN 10025-6 S890QL. Content % (ladle analysis), maximum.

C

SI

MN

P

S

B

CR

CU

MO

0.20

0.80

1.70

0.020

0.010

0.005

1.50

0.50

0.70

N

NB*

NI

TI*

V*

ZR*

 

 

 

0.015

0.06

2.0

0.05

0.12

0.15

 

 

 

EN 10025-6 s890ql steel plates V Notch Impact Test

Position of Samples

0 ºC

-20 ºC

-40 ºC

Longitudinal

50 Joules

40 Joules

30 Joules

Transverse

35 Joules

30 Joules

27 Joules

en 10025-6 s890ql steel plates Quenched and Tempered Structural Steel

Minimum recommended inside bending radius

Axis of bend in transverse direction
3.0t

Axis of bend in longitudinal direction
4.0t

3. The steel specified in this standard can be used for the production of hot rolled plate with minimum nominal thickness of 3 mm and maximum nominal thickness of less than 150 mm for S460, S500, S550, S620, s690, S890 and s960 series steel plates. The minimum yield strength specified for Quenched and tempered steel is 460mpa1) to 960 mpa1)
4. Production size; Thickness; 6-300mm, width max 3800mm length.
en 10025-6 s890ql Chemical Composition

C

Si

Mn

P

S

B

Cr

Cu

Mo

0.20

0.80

1.70

0.020

0.010

0.005

1.50

0.50

0.70

N

Nb*

Ni

Ti*

V*

Zr*

0.015

0.06

2.0

0.05

0.12

0.15

PLATE THICKNESS MM

YIELD STRENGTH REH (MPA)

TENSILE STRENGTH R(MPA)

ELONGATION A5 % MINIMUM

IMPACT STRENGTH J, MINIMUM

3 to50

890

940 – 1100

11

30 @ -40º C

50to 100

830

880 – 1100

11

30 @ -40º C

en 10025-6 s890ql steel plates manufacturer and property Chemical Properties Of s890ql steel plate:

C

Si

Mn

Ni

P

S

Cr

Mo

V

N

Nb

Ti

Cu

Zr

B

CEV

max   0.2

max   0.8

max   1.7

max   2

max   0.025

max   0.015

max   1.5

max   0.7

max   0.12

max   0.015

max   0.06

max   0.05

max   0.5

max   0.15

max   0.005

max   0.82

Mechanical Properties Of s890ql steel plate:

Designation

Mechanical Properties (ambient temperature)

Steel Name

Steel Number

Min. Yield Strength Reh MPa

Tensile Strength Rm MPa

Min. % elongation after fracture

Nominal thickness (mm)

Nominal thickness (mm)

≥3 ≤50

≥50 ≤100

≥100 ≤150

≥3 ≤50

≥50 ≤100

≥100 ≤150

S890QL

1.8983

890

830

––

940/1100

880/1100

––

11

Notch Impact Energy:

Grade

Sample Orientation

@ 0°C

@-20°C

@-40°C

@-60°C

S890QL

Longitudinal

50 J

40 J

30 J

––

Traverse

35 J

30 J

27 J

––

1.Grade:
S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

2. Specification:
  Thickness: 8mm to 300mm
   Width: 1500mm to 4200mm
   Length: 4000mm to 18000mm

3. Adopt Standard: EN10025-6 2004

4. Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technology, etc.

5. Delivery Time: 30-40days

6. Payment Item: 30% TT, or LC and TT.

7..Trade Terms: FOB, CFR, CIF

8. Steel Services: Cutting, Painting, Pretreatment, and The third party inspection in DNV, BV, LR, ABS, SGS ,etc and others in super thick ship steel plate.

Gangsteel is specialized in super thick low alloy, high strength steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now.
If you have any inquiry in steel price or technical conditions, please contact us freely.

All flame reduce metal items are dressed earlier than ultimate inspection and despatch. If you have any special necessities please inform our gross sales workers whenever you enquire for flame reduce steel profiles.

  • Manufacturer of High Tensile Plates Strenx 700 S690ql Weldox En High Tensile Steel Plates provided by Champak Industries, Mumbai, Maharashtra.
  • The common minimum yield for this material is 355 N/mm², therefore the name S355.
  • Structural Steel, sizzling rolled Thick plates structural metal, scorching rolled.
  • As an unalloyed low carbon delicate metal grade S355 is supplied within the scorching rolled situation.
  • Strenx™ seven-hundred MC is a hot rolled structural steel made for cold forming, with a minimum yield strength of seven hundred MPa for stronger and lighter structures.
  • First specified within the European EN10025 normal and later revealed by the British Standards Institure as BS EN S355, S355J2 and S355J2 N. These requirements superceded the BS4360 grades.

en 10025-6 s890ql steel plate 1/2 manufacturer

Having been targeted on various steel merchandise for over 20 years, we now brings prospects high quality merchandise with excessive precision and excessive power. Plates of S690 steel grade can be found with thicknesses of mm for Q and QL high quality teams and with thicknesses of 8 50 mm for QL1 high quality group.

For plate thicknesses below 12 mm, the take a look at could be carried out on Charpy-V check specimens with reduced width; the minimum width must be 5 mm. EN S355J2WP 1.8946 Corten Steel Plate & Sheet Has been dedicated to the of export steel business greater than 10 years. Due to the materials high strength nature, utilizing S690QL will promote leaner designed constructions with increased payload capability and vitality effectivity. Plate thicknesses and dimensions which deviate from the standard dimensional program for this steel grade, could also be attainable on request.

leaner thickness metal structural plate with enhance payload capability. Neelcon metal is suppliers and Stockholders of en s690ql equivalents, EN Structural Steel Plates, EN S690QL High Yield Steel Plates, Get EN GradeS690QL Quenched and tempered plate at finest value in India. We have a big stock of extreme yield steel plates for engineering applications.

en 10025-6 s890ql steel plate above window manufacturer

Furthermore, the limiting CEV2 values indicated by PR EN are respected. abs grade ah36 shipbuilding and offshore industries steel Has been committed to the of export metal trade more than 10 years. We are Manufacturer and Exporter of S690QL Structural Steel Plate, EN S690QL High Yield Steel Plates Suppliers in Mumbai, India. All of our S690 QL EN 10025–6 structural metal Plates, EN10025 S690QL High Tensile Plate, is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, and so forth. Abrex four hundred Sumihard four hundred Wear Abrasion Resistant Sheet Plates Suppliers, Manufacturer & Exporters.

The standard specifies seven steel grades, and their yield strength at ambient temperature is different. All steel grades to be supplied in the following steps shall be established when required. The specified minimum value of impact energy when the weather is not lower than – 20 �� (no label). When the temperature is not lower than – 50 ��, the specified minimum value of impact energy is expressed in L. (except for s960), the minimum amount of impact energy set when the temperature is not lower than – 60 �� is defined as L1. In quenching and tempering delivery conditions (q) and grade L: Steel en 10025-6-s460ql; or steel en10025-6-1.8906.

en 10025-6 s890ql 4 x 8 steel plate manufacturer