ASTM A516 Grade 65, also commonly written as A516GR.65, A516 Gr.65, A516 GR 65 and ASTM A516/A516M Grade 65 [Grade 450], is the inch-pound Grade 65 designation in ASTM A516/A516M. Grade 450 is the SI designation in the same specification, not a converted Grade 65 value. ASME SA516 Grade 65 (SA-516 or SA-516M Grade 65 or Grade 450) is the corresponding ASME family designation, not merely another spelling of the ASTM name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASTM A516 Grade 65.
This page states the published tensile, yield and elongation figures for ASTM A516 Grade 65 [Grade 450]. These are the official public-reference mechanical properties already disclosed on ASTM A516 Grade 65 and ASME SA516 Grade 65. They are not a certified extract of every clause in the current ASTM or ASME edition. Inch-pound Grade 65 and SI Grade 450 values are independent and are not converted from one another on this page.
ASTM A516 Grade 65 Mechanical Properties
| Property | Published reference value | Basis / conditions |
|---|---|---|
| Tensile strength, Grade 65 | 65–85 ksi | Inch-pound; ASTM A516/A516M-25 public Scope |
| Tensile strength, Grade 450 | 450–585 MPa | SI; ASTM A516/A516M-25 public Scope. Inch-pound and SI values are independent, not exact conversions |
| Minimum yield strength | 35 ksi | Inch-pound; SSAB Grade 65 published required properties, as disclosed on the official ASTM A516 Grade 65 and ASME SA516 Grade 65 pages, and consistent with Ferrobend, MetalMate and PipingMart compilations. 35 ksi is not published here as 240 MPa or as an official SI specification value |
| Minimum elongation, 2 in. [50 mm] gauge | 23% | SSAB required properties as used on the official grade page; thickness adjustments per A20/A20M or the corresponding ordered SA-20 requirements |
| Minimum elongation, 8 in. [200 mm] gauge | 19% | Same reference basis and applicable thickness adjustments |
The 35 ksi yield minimum is a required-property figure from the SSAB Grade 65 datasheet as used on the official pages, not a typical heat result and not an official SI value. Do not treat 35 ksi as 240 MPa for an SI order. Where the purchase order is written to Grade 450, use the SI tensile range from the A516/A516M-25 public Scope and confirm the SI yield in the ordered edition; this page does not invent that SI yield figure.
Elongation is reported on both the 2 in. [50 mm] and 8 in. [200 mm] gauges (23% and 19%). Those percentages are gauge-length minima, not thickness bands. Thickness adjustments in A20/A20M, or the corresponding SA-20 requirements, still apply and must be assessed before comparing a test result.
What These Figures Do and Do Not Cover
| Topic | Position used on this page |
|---|---|
| Thickness effect on the tensile range | The official Grade 65 tensile range is not restated as a thickness-banded strength table. Chemistry carbon maxima are thickness-banded; the tensile and yield figures above are the grade values used on the official pages |
| Delivery condition | Public compilations and the SSAB Grade 65 datasheet indicate normalizing over 1.50 in. [40 mm] unless otherwise ordered, and as-rolled at or below that thickness unless otherwise agreed or unless notch toughness is specified. Normalizing does not rewrite the tensile range |
| Related A516 grades | ASTM A516 Grade 60 is published as 60–80 ksi tensile with a 32 ksi yield minimum and 25%/21% elongation; ASTM A516 Grade 70 as 70–90 ksi tensile with a 38 ksi yield minimum. Those are different grades, not Grade 65 values and not replacements |
| Allowable stress | ASTM A516 does not itself publish an allowable design stress. For many ASME Section VIII Division 1 designs, use the applicable ASME Section II-D table for the SA-516 Grade 65 line, not a conversion of these tensile figures |
| Hardness or impact energy | Not part of the basic Grade 65 mechanical table. Charpy testing is supplementary; hardness is not an A516 specified acceptance value |
Frequently Asked Questions (FAQ)
What is the yield strength of ASTM A516 Grade 65?
The official public-reference minimum yield used on ASTM A516 Grade 65 is 35 ksi, from SSAB’s Grade 65 required properties. It is a minimum, not a typical value, and is not published here as 240 MPa.
What is the tensile strength of ASTM A516 Grade 65?
ASTM A516/A516M-25 public Scope gives 65–85 ksi for Grade 65 and 450–585 MPa for Grade 450. The two unit systems are independent.
Does normalizing change the yield strength of ASTM A516 Grade 65?
Normalizing is a delivery condition. It does not replace the Grade 65 tensile and yield table with a different specified range. Any additional requirements belong on the order.
Where are the official ASTM A516 Grade 65 mechanical properties published on this site?
On ASTM A516 Grade 65 and, for the ASME designation, on ASME SA516 Grade 65.
For plate to ASTM A516/A516M Grade 65 [Grade 450] or ASME SA-516 Grade 65, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.
