ASTM A516 Grade 65, also commonly written as A516GR.65, A516 Gr.65, A516 GR 65 and ASTM A516/A516M Grade 65 [Grade 450], is the inch-pound Grade 65 designation in ASTM A516/A516M. Grade 450 is the SI designation in the same specification, not a converted Grade 65 value. ASME SA516 Grade 65 (SA-516 or SA-516M Grade 65 or Grade 450) is the corresponding ASME family designation, not merely another spelling of the ASTM name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASTM A516 Grade 65.

This page covers welding of ASTM A516 Grade 65 plate: weldability, P-Number and Group Number used in ASME Section IX qualification, carbon-equivalent practice, and why preheat and postweld heat treatment must come from the qualified WPS and the construction code — not from an assumed A516 default table. A516/A516M itself does not specify a weldability index, a preheat temperature or a consumable classification.

What Is Specified and What Is Practice

Topic Position used on this page
A516/A516M specified welding rules None. The specification does not set a CEV maximum, a preheat temperature, a consumable classification or a PWHT cycle
P-Number / Group Number ASME SA516 Grade 65 is P-No. 1 Group 1 on public QW/QB-422 listings citing the 2017 and 2019 editions and on Table 1A compilations for this grade (UNS K02403). This is the same Group Number as ASTM A516 Grade 60, not the Group 2 listing used for ASTM A516 Grade 70. Grouping is not a completed WPS
Typical mill CEV (IIW) SSAB Grade 65 datasheet: typical 0.44 wt% for 0.100–3.54 in.; optional maximums 0.43 (up to 1.25 in.) and 0.45 (up to 1.5 in.) when those options are ordered. Mill typical/optional figures, not A516 limits
Preheat and consumables From the qualified WPS and the construction code. Low-hydrogen consumables (for example AWS A5.1 E7018 for SMAW) are common practice, not an A516 mandate. A quoted 100–150 °C (212–302 °F) band is not a specification requirement
Postweld heat treatment When required by the qualified WPS and the construction code (including UCS-56 when Section VIII Division 1 applies). This page does not publish an unsourced thickness cutoff as an A516 rule

Grade 65 is a killed carbon-manganese vessel plate and is generally regarded as readily weldable with common fusion-welding processes when the WPS is qualified for the project. When impact testing is required, QW-403.5 treats Group Numbers separately, so a procedure qualified on Group 1 does not automatically cover Group 2.

Carbon Equivalent (Typical Mill Figures, Not an A516 Limit)

ASTM A516/A516M does not publish a specified carbon-equivalent maximum for Grade 65. When a carbon equivalent is calculated, the IIW formula is the usual basis:

CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15, with element contents in weight percent.

The SSAB typical CEV of 0.44 wt% and the optional tighter maximums cited above are one producer’s figures, not ASTM A516 specified limits and not a Gangsteel guarantee of every heat. If a carbon-equivalent ceiling is needed, write it on the purchase order (A20/A20M S20 is the usual supplementary route) and confirm it on the material report.

Delivery condition still matters for fabrication planning. Public compilations and the SSAB Grade 65 datasheet indicate that plates over 1.50 in. [40 mm] are supplied normalized unless otherwise agreed, while thinner plate is commonly as-rolled unless otherwise ordered or unless notch toughness is specified. Normalized and as-rolled plates of the same chemistry still need a WPS that covers the delivered condition. AWS D1.1 prequalified minimum preheats apply only when that structural code and a prequalified WPS are actually being used; they are not automatic ASME vessel requirements and are not restated here as Grade 65 limits.

Frequently Asked Questions (FAQ)

Does ASTM A516 Grade 65 have a specified carbon-equivalent limit?

No. ASTM A516/A516M does not publish a Grade 65 CEV maximum. The 0.44 wt% typical CEV and the optional 0.43 / 0.45 maximums cited above are SSAB mill figures, not A516 specification limits.

What is the P-Number for ASME SA516 Grade 65 or ASTM A516 Grade 65?

Public Section IX and Table 1A listings place SA-516 Grade 65 in P-No. 1 Group 1. Confirm the edition in force for the WPS. P-Number grouping is not, by itself, a completed welding procedure.

Can a preheat temperature be taken directly from the ASTM A516 Grade 65 specification?

No. A516 does not specify preheat. Use the qualified WPS and the construction code. AWS D1.1 tables apply only when that code is the welding basis.

Where should welding requirements for ASTM A516 Grade 65 be confirmed?

Start with the official product page, ASTM A516 Grade 65, and the WPS and construction code for the job. Use ASME SA516 Grade 65 when the plate order is written to the ASME designation.

For plate to ASTM A516/A516M Grade 65 [Grade 450] or ASME SA-516 Grade 65, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.

A516 Grade 65 Welding: Weldability Guide for ASTM A516/A516M Plate