1.0570+u

1.0570 h9

1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis

gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate

1.0038 vs 1.0570

EN S235JR material (1.0038 steel) is an European commonplace sizzling rolled non-alloy structural steel grade. It has good plasticity, toughness and weldability, certain power and good cold bending properties. For specification, datasheet and equal, please see the next tables. St52 metal (St52 is an unalloyed structural metallic grade complies with DIN , the designation has been discarded since 2004. According to German standard DIN 17100, St52 metal is split into St52 3U (1. and St52 3N (1.0570 material). With its low carbon equal, ST52-3 steel possesses good cold-forming properties.

Ranges represent what’s permitted beneath applicable requirements. For every property being in contrast, the top bar is EN 1.0038 metal and the underside bar is EN 1.0570 steel. Usually sulfur is a dangerous factor, which makes the hot brittleness of steel excessive, and the content of sulfur is limited to lower than 0.05%. Manganese is the necessary austenite stabilizing elements contribute to the formation of texture structure and increase the firmness, energy and wear resistance.

  • The normal annealed or chilly shaped materials is mainly preferred for machining of general structural steels.
  • What is the chemical composition of UNE 1.0038 UNE EN steel?
  • The heat remedy just isn’t applied to basic structural steels apart from normal annealing and stress-reduction annealing which is applied at °C roughly.
  • For UNE 1.0038 UNE EN Hardness, UNE 1.0038 UNE EN steel tensile strength, yield strength,elongation, please see the next desk.
  • Our merchandise have been used in all types of areas, similar to aviation, aerospace, navigation, nuclear energy, chemical enterprise, digital knowledge, equipment manufacture, petrochemical, automotive, instrument and meter, communication, transportation, and medical gadgets, and so DIN ST 52-3 forth.

DIN Rectangular and Square electric-welded precision metal tubes – dimensions and technical circumstances of supply for tubes for use in motorcar development. Please choose the specified material or use the search engine to see the selected material’s spec sheet. If you could have any inquiry for metal materials in China market, please be at liberty to contact us. ST52 3 steel round bar is a kind of low alloy metallic bar, and ST52 3 steel DIN 17100 ST 52-3 spherical bar is extensively utilized in manufacture of chilly work dies, punches, chilly chopping scissors, drill bushes, gauges, wire drawing dies, coining dies, draw bench boards, drawing dies, thread rolling dies, and so on. DIN 1.0037 (material St37-2) equal to US ASTM AISI SAE, European commonplace EN, British normal BSI, France normal NF, ISO standard, Japanese commonplace JIS, Chinese GB commonplace and Indian IS commonplace.

ST52-3 metal has many functions.Generally ST52-3 steels is used for Machinery elements, mobile equipment, crane, increase, chassis, buildings, bridges and most structural activities. Mpa is the abbreviation for Megapascals. St52 metal (St52- is an unalloyed structural metal grade complies with DIN 17100: 1980, the designation has been discarded since 2004. According to German commonplace DIN 17100, St52 metal is divided into St52-3U (1. and St52-3N (1.0570 material). St 52 material new designation is S355, St52-3 new name is S355J2 (1. , St52-3 U new designation is S355J0 (1. , and St52-3 N new name in EN 10025: 1993 is S355J2G3, DIN 17100 has been replaced by EN 10025-2: 2004.

1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,

ST52-3

DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:

DIN

ASTM

EN

JIS

Chemical Composition

C.E.

C

Si

Mn

Cr

Mo

Ni

V

W

S

P

CU

17100

St52-3N

A572-50

10025-2:2004

S355J2+N

G3106

SM490YB

max

0.22

max

0.55

max

1.60

max

0.035

max

0.035

max

0.047

St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.

Chemical Composition (product analysis), %, ≤

Country (Region)

Standard

Steel Grade (Steel number)

C

Si

Mn

P

S

N

Cu

Thickness (d) (mm)

Method of deoxidation

Germany

DIN 17100: 1980

St52-3 (1.0570)

0.22

0.60

1.70

0.065

0.065

≤ 30

Fully Killded

0.24

30 <d ≤100

European Union

EN 10025: 1993

S355J2G3 (1.0570)

0.22

0.60

1.70

0.045

0.045

≤ 30

0.24

30 <d ≤100

EN 10025-2: 2004

S355J2 (1.0577)

0.22

0.60

1.70

0.035

0.035

0.60

≤ 30

0.24

30 <d ≤100

St52-3 Steel Properties
Physical Properties

  • Material St 52-3 Density: 7.85 g/cm3
  • Melting point: 1420-1460 °C (2590-2660 °F)

DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate

Thickness (mm)

Yield Strength Reh

min (N / mm2)

Tensile Strength Rm

min (N / mm2)

Elongation A5 min

(%)

Impact Values Charpy-V-Notch Longitudinal

Average from 3 Speimens Thk.

>10<150mm.

3<thk<100

315-355

490-630

max 22

27 Joules at -20 C

St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.

Chemical Composition (ladle analysis), %, ≤

Country (Region)

Standard

Steel Grade (Steel number)

C

Si

Mn

P

S

N

Cu

Thickness (d) (mm)

Method of deoxidation

Germany

DIN 17100: 1980

St52-3 (1.0570)

0.20

0.55

1.60

0.040

0.040

≤ 30

Fully Killded

0.22

30 <d ≤100

European Union

EN 10025: 1993

S355J2G3 (1.0570)

0.20

0.55

1.60

0.035

0.035

≤ 30

0.22

30 <d ≤100

EN 10025-2: 2004

S355J2 (1.0577)

0.20

0.55

1.60

0.025

0.025

0.55

≤ 30

0.22

30 <d ≤100

DIN17100 ST52-3 EQUIVALENT STEEL GRADES

EN 10025 – 2

EN 10025+A1

?SN

DIN 17100

EN10027-1

EN10027-2

EN10027-1 Grade 

EN10027-2 Grade

 

 

S235JR2

1.0038

S235JRG2

1.0038

11375

RSt 37-2

S235J0

1.0114

S235J0

1.0114

11378

St 37-3U

 

S235J2GR3

1.0116

11378

St 37-3N

S235J2

1.0117

S235J2G4

1.0117

S275JR

1.0044

S275JR

1.0044

11443

St 44-2

S275J0

1.0143

S275J0

1.0143

11445

St 44-3U

 

S275J2GR3

1.0144

11448

St 44-3N

S275J2

1.0145

S275J2G4

1.0145

S355JR

1.0045

S355JR

1.0045

11523

St 52-3

S355J0

1.0553

S355J0

1.0553

11523

St 52-3U

 

S355J2G3

1.057

11503

St 52-3N

S355J2

1.0577

S355J2G4

1.0577

 

Material St 52-3 Datasheet – 3

Yield strength (≥ N/mm2); Thickness (d) mm

Steel (Steel number)

d≤16

16< d ≤40

40< d ≤63

63< d ≤80

80< d ≤100

>100

St52-3

355

345

335

325

315

by agreement

Tensile Strength
Material St 52-3 Datasheet – 4

Tensile strength (≥ N/mm2); Thickness (d) mm

Steel (Steel number)

d<3

3 ≤ d ≤ 100

>100

St 52-3

515-680

490-630

by agreement

Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5

Elongation (≥, %); Thickness (d), mm

Steel (Steel number)

0.5 ≤d <1

1≤ d <1,5

1,5≤ d <2

2≤ d <2,5

2,5≤ d <3

St52-3U

14

15

16

17

18

St52-3N

12

13

14

15

16

Elongation (≥, %); Thickness (d), mm

Steel (Steel number)

3 ≤d ≤40

40< d ≤63

63 < d ≤100

>100

St52-3

22

21

20

by agreement

St52-3N

20

19

18

 

Our merchandise have been used in every kind of areas, corresponding to aviation, aerospace, navigation, nuclear energy, chemical business, digital knowledge, machinery manufacture, petrochemical, automotive, instrument and meter, communication, transportation, and medical devices, and so DIN ST 52-3 forth. Some equal supplies may be stricter whereas others is also exterior the bounds of the unique material in chosen parameters. These comparison table is just meant as an indication of the closest khown equal grades.

S235JR metal plate is one mainly of Carbon and low alloy metal, S235JR metal plate is a kind of metal sheet underneath EN commonplace which is used to construct ship, bridge, belongs to high energy sheet. We have a great choice of supplies that quickly and reliably let us meet our shopper’s expectations. We repeatedly storage aproximately 5,000 to six,000 material tons. With greater than four hundred licensed materials, such as steels, nickel-based mostly alloys, NF metals, aluminium, copper and bronze materials, we are able to supply our clients an impressive number of materials. Physical Properties Material St 52 3 Density7.eighty five g/cm3 Melting level °C ( °F)ST52 3 BEBON steelST52 3 steels is a low alloy, excessive energy structural steel which can be readily welded to other weldable metal.

1.0038 vs 1.0570

ST 52.3 spherical bars are carbon-manganese grade which are functioned to produce high ductile properties and habitually used within the motorized business. Check ST 52-3 chemical composition, it’s a Carbon structural steel materials, ST 52-3 Steel Bars are suitable for producing cold work dies. DIN17100 is among the finest examples of common structural steel.

HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price

1.0038 vs 1.0570