St52-3, also commonly written as ST52-3, St 52-3 and DIN 17100 St52-3, is the legacy DIN 17100 St52-3 grade with material number 1.0570 (also written DIN 1.0570). St52-3N and ST52-3N make the normalized delivery condition explicit. These are written forms of the same DIN grade, not names of other standards.

St52-3 steel is a legacy German carbon-manganese structural steel from DIN 17100. It has a minimum upper yield point of 355 MPa at thickness up to 16 mm and a tensile strength of 490–630 MPa at 3–100 mm, and plate is usually delivered normalized. DIN 17100 is withdrawn; today the nearest grade usually reviewed is EN 10025-2 S355J2+N.

St52-3 Steel in Brief

Question Answer
Standard DIN 17100:1980-01, steels for general structural purposes (withdrawn)
Material number 1.0570
Steel type Non-alloy carbon-manganese structural steel, special-killed (RR)
Name meaning St = steel; 52 = historical tensile class (about 52 kp/mm²); -3 = quality group 3
Yield strength 355 MPa min (≤16 mm), decreasing to 315 MPa (>80–100 mm)
Tensile strength 490–630 MPa (3–100 mm)
Toughness N condition: 27 J at −20 °C (10–63 mm)
Usual plate condition Normalized N, or normalizing rolling
Uses Building and bridge steelwork, machinery frames, vehicle structures, general welded fabrication

St52-3 Chemical Composition (Heat Analysis, Maximum %)

Element / thickness basis Heat analysis, mass %
C, thickness ≤30 mm 0.20 max
C, thickness >30–100 mm 0.22 max
C, thickness >100 mm By agreement
Si 0.55 max
Mn 1.60 max
P 0.040 max
S 0.040 max
N No numerical limit in the table (dash); nitrogen-binding elements required
Deoxidation Special-killed, coded RR

DIN 17100:1980-01, Table 1. ST52-3N uses the same chemistry.

St52-3 Mechanical Properties

Nominal plate thickness Upper yield point ReH min, MPa Tensile strength Rm, MPa
<3 mm 355 510–680
3–16 mm 355 490–630
>16–40 mm 345 490–630
>40–63 mm 335 490–630
>63–80 mm 325 490–630
>80–100 mm 315 490–630
>100 mm By agreement By agreement

These are DIN 17100:1980-01, Table 2 values. For flat products of width ≥600 mm, tensile specimens are transverse to rolling; otherwise Table 2 specifies longitudinal specimens. Values above 100 mm require agreement and must not be extrapolated from the thinner bands.

St52-3 Today: Current Grades to Review

Grade Relationship to St52-3
EN 10025:1993 S355J2G3 Former European name that carried material number 1.0570
EN 10025-2 S355J2+N Nearest current grade; 1.0577, tighter P and S, tensile minimum 470 MPa
ASTM A572 Grade 50 Strength-class cross-reference; no Charpy test unless ordered
JIS G3106 SM490B Strength-class cross-reference; lower yield, impact at 0 °C

These are comparison candidates, not automatic substitutes. Any replacement needs designer and purchaser approval.

Frequently Asked Questions (FAQ)

What kind of steel is DIN 17100 St52-3?

DIN 17100 St52-3 is a non-alloy carbon-manganese structural steel for welded, riveted and bolted structures, with a 355 MPa minimum yield at thickness up to 16 mm.

Is DIN 17100 St52-3 mild steel?

It is a carbon-manganese structural steel of higher strength than common mild structural grades such as St37-2. Its carbon is limited to 0.20–0.22% and manganese to 1.60%.

Is DIN 17100 St52-3 the same as S355?

No. S355 is an EN 10025-2 strength class with several qualities. DIN 17100 St52-3 shares the 355 MPa yield class, but its tensile range, P and S limits and impact rules differ. S355J2+N is the closest current grade.

Can DIN 17100 St52-3 be hardened?

It is not a quench-and-temper steel; it is used in the normalized or equivalent rolled condition. Hardenable medium-carbon steels such as C45 belong to a different standard.

For plate to DIN 17100 St52-3 / ST52-3N, please contact Gangsteel with the standard edition, grade, delivery condition, dimensions and quantity. Learn more about our structural and high-strength steel plate at Gangsteel.

What Is St52-3 Steel? DIN 17100 1.0570 Explained