ASME SA516 Grade 60, also commonly written as SA516GR.60, SA-516 Grade 60, SA516 GR 60 and ASME SA-516/SA-516M Grade 60 [Grade 415], is the ASME family designation corresponding to ASTM A516/A516M Grade 60 [Grade 415]. Grade 415 is the SI designation in the same family, not a converted Grade 60 value. ASTM A516 Grade 60 is the corresponding ASTM designation, not merely another spelling of the ASME name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASME SA516 Grade 60.

This page explains what ASME SA516 Grade 60 is: the ASME family designation for killed carbon-manganese pressure-vessel plate corresponding to ASTM A516/A516M Grade 60 [Grade 415], intended for moderate and lower-temperature welded vessels and boilers where improved notch toughness is important. The figures below are the official public-reference values already disclosed on ASME SA516 Grade 60 and ASTM A516 Grade 60.

What ASME SA516 Grade 60 Is

Topic Position used on this page
Specification family ASME SA-516 / SA-516M Grade 60 (inch-pound) or Grade 415 (SI). Grade 415 is not a conversion of Grade 60
Corresponding ASTM designation ASTM A516 Grade 60. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true
Product and service Killed, fine-grain carbon-manganese plate for welded pressure vessels when the project names this grade
Related grades ASME SA516 Grade 65 and ASTM A516 Grade 70 are different strength grades, not replacements

Chemistry, Mechanical Properties and Delivery

Carbon maxima, heat = product, are 0.21 / 0.23 / 0.25 / 0.27 / 0.27 at ½ in. and under / over ½ to 2 / over 2 to 4 / over 4 to 8 / over 8 in. (heat = product). Manganese is thickness- and option-dependent, including a Grade 60-specific thin-plate choice (see the official page). Silicon is 0.15–0.40% heat and 0.13–0.45% product. Phosphorus and sulfur are 0.025 or 0.035 in public references; use the ordered edition. A carbon–manganese adjustment permits 0.06% Mn above the specified maximum for each 0.01% C below the specified carbon maximum, up to 1.50% heat / 1.60% product.

Property Published reference value Basis / conditions
Tensile strength, Grade 60 60–80 ksi Inch-pound; ASTM A516/A516M-25 public Scope, as used on ASTM A516 Grade 60
Tensile strength, Grade 415 415–550 MPa SI; same public Scope. Inch-pound and SI values are independent, not exact conversions
Minimum yield strength 32 ksi Inch-pound; SSAB Grade 60 required properties as used on the official ASTM A516 Grade 60 and ASME SA516 Grade 60 pages. 32 ksi is not published here as 220 MPa or as an official SI specification value
Minimum elongation, 2 in. [50 mm] / 8 in. [200 mm] 25% / 21% SSAB required properties as used on the official pages, with A20/A20M or SA-20 thickness adjustments

Public compilations and the SSAB Grade 60 datasheet indicate normalizing over 1.50 in. [40 mm] unless otherwise ordered, with thinner plate commonly as-rolled unless otherwise agreed or unless notch toughness is specified. Charpy, HIC and hardness tests are not automatic. Allowable stress is read from the governing Code table (for many VIII-1 designs, Section II-D for the SA-516 Grade 60 line), not from the tensile range.

Frequently Asked Questions (FAQ)

What is ASME SA516 Grade 60 steel plate used for?

It is the ASME designation for a killed carbon-manganese pressure-vessel plate grade used in moderate and lower-temperature welded vessels and boilers where improved notch toughness is important, when the project specifies SA-516 Grade 60 or the corresponding ASTM A516 Grade 60 name.

Is Grade 415 the same as ASME SA516 Grade 60?

Grade 415 is the SI designation in the same family. It is not a converted Grade 60 value. Confirm the unit system written on the order.

Is ASTM A516 Grade 60 identical to ASME SA516 Grade 60?

They are corresponding family designations, not interchangeable certificates. Use ASME SA516 Grade 60 when the order is written to the ASME name.

Where is the official product page for ASME SA516 Grade 60?

The official product page is ASME SA516 Grade 60.

For plate to ASTM A516/A516M Grade 60 [Grade 415] or ASME SA-516 Grade 60, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.

What Is SA516 Grade 60 Steel Plate? ASME SA-516 Grade 60 Explained