ASTM A516 Grade 65, also commonly written as A516GR.65, A516 Gr.65, A516 GR 65 and ASTM A516/A516M Grade 65 [Grade 450], is the inch-pound Grade 65 designation in ASTM A516/A516M. Grade 450 is the SI designation in the same specification, not a converted Grade 65 value. ASME SA516 Grade 65 (SA-516 or SA-516M Grade 65 or Grade 450) is the corresponding ASME family designation, not merely another spelling of the ASTM name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASTM A516 Grade 65.

This page explains what ASTM A516 Grade 65 is: a carbon-manganese pressure-vessel plate grade in ASTM A516/A516M, intended for moderate and lower-temperature welded vessels and boilers where improved notch toughness is important. The chemistry, strength and delivery figures below are the official public-reference values already disclosed on ASTM A516 Grade 65 and ASME SA516 Grade 65.

What ASTM A516 Grade 65 Is

Topic Position used on this page
Specification ASTM A516/A516M. Grade 65 is the inch-pound designation; Grade 450 is the SI designation in the same specification, not a conversion of Grade 65
Corresponding ASME designation ASME SA516 Grade 65 (SA-516 or SA-516M Grade 65 or Grade 450). An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true
Product form and service Killed, fine-grain carbon-manganese plate for welded pressure vessels when the project names this grade. It is not a structural A6 product and not a piping forging
Related A516 grades ASTM A516 Grade 60 and ASTM A516 Grade 70 are different strength grades in the same specification. They are not replacements for Grade 65

Chemical Composition (Public Reference)

Element / condition Published public-reference limits on ASTM A516 Grade 65
Carbon, max, heat = product 0.24 / 0.26 / 0.28 / 0.29 / 0.29 at ½ in. and under / over ½ to 2 / over 2 to 4 / over 4 to 8 / over 8 in. (heat = product)
Manganese, both listed thickness bands 0.85–1.20% heat, 0.79–1.30% product. Unlike Grade 60, Grade 65 has no thin-plate manganese choice
Carbon–manganese adjustment For each 0.01% below the specified carbon maximum, manganese may increase 0.06% above the specified manganese maximum, up to 1.50% heat / 1.60% product
Silicon 0.15–0.40% heat, 0.13–0.45% product
Phosphorus / sulfur, max 0.025 or 0.035 each, with the official-page edition note. Use the ordered edition

Mechanical Properties and Delivery Condition

Property Published reference value Basis / conditions
Tensile strength, Grade 65 65–85 ksi Inch-pound; ASTM A516/A516M-25 public Scope, as used on ASTM A516 Grade 65
Tensile strength, Grade 450 450–585 MPa SI; same public Scope. Inch-pound and SI values are independent, not exact conversions
Minimum yield strength 35 ksi Inch-pound; SSAB Grade 65 required properties as used on the official ASTM A516 Grade 65 and ASME SA516 Grade 65 pages. 35 ksi is not published here as 240 MPa or as an official SI specification value
Minimum elongation, 2 in. [50 mm] / 8 in. [200 mm] 23% / 19% SSAB required properties as used on the official pages, with A20/A20M or SA-20 thickness adjustments

Public compilations and the SSAB Grade 65 datasheet indicate that plates over 1.50 in. [40 mm] are supplied normalized unless otherwise ordered, while thinner plate is commonly as-rolled unless otherwise agreed or unless notch toughness is specified. Normalizing does not change the chemistry or tensile tables. Charpy impact testing, HIC/NACE testing and a hardness acceptance value are not automatic Grade 65 requirements. Allowable design stress is not published in ASTM A516; for many ASME VIII-1 designs, use the applicable II-D table for the SA-516 Grade 65 line.

Frequently Asked Questions (FAQ)

What is ASTM A516 Grade 65 steel plate used for?

It is a killed carbon-manganese pressure-vessel plate grade for moderate and lower-temperature welded vessels and boilers where improved notch toughness is important, when the project specifies ASTM A516 Grade 65 or the corresponding ASME SA-516 Grade 65 designation.

Is Grade 450 the same as ASTM A516 Grade 65?

Grade 450 is the SI designation in ASTM A516/A516M. It is not a converted Grade 65 value. Inch-pound and SI tensile figures are independent; confirm the unit system written on the order.

Is ASME SA516 Grade 65 identical to ASTM A516 Grade 65?

They are corresponding family designations, not interchangeable certificates. Use ASME SA516 Grade 65 when the order is written to the ASME name, and ASTM A516 Grade 65 when it is written to the ASTM name.

Where is the official product page for ASTM A516 Grade 65?

The official product page is ASTM A516 Grade 65. Contact details for an enquiry are given below.

For plate to ASTM A516/A516M Grade 65 [Grade 450] or ASME SA-516 Grade 65, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.

What Is A516 Grade 65 Steel Plate? ASTM A516/A516M Grade 65 Explained