Gangsteel is En10025-2 S275jr steel plate supplier
Gangsteel supply En10025-2 S275jr steel plate steel sheet of low alloy high strength. We sell En 10025-2 S275jr steel plate cutting parts and machined parts.
Keywords: En10025-2 S275jr,s275jr steel,s275jr steel plate,s275jr grade,s275jr steel grade
Adopt standard: EN10025-2
Sell steel grade: S275JR, S275J0, S275J2, S235JR, S235J0, S235J2, S355JR, S355J0, S355J2, S355K2, S450J0 steel grade
S275JR steel plate
This is common carbon steel plate in S235JR, S235J0 and S235J2 steel grade. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.
S symbol for structural steel
275 indication of the min specified yield strength for thickness of under 16mm.
JR symbol 20 temperature impact test.
J0 symbol 0 temperature impact test
J2 symbol -20 temperature impact test
S275JR, S275J0 and S275j2 steel is a structural steel grade which be used in riveted, bolted, or welded construction of bridges and buildings.
For more information of S275jr steel, please refer them in following.
En10025-2 S275jr steel plate Chemical composition of product analysis:
| Grade | C % | Si % | Mn % | P % | S % | N % | Cu % |
| S275JR | 0.24 | – | 1.600 | 0.045 | 0.045 | 0.014 | 0.060 |
En10025-2 S275jr steel plate mechanical properties steel plate
| Grade | Thickness(mm) | Min Yield (Mpa) | Tensile(MPa) | Elongation(%) | Min Impact Energy | |
| S275JR | 8mm-100mm | 275Mpa | 430-560Mpa | 21-23% | 20 | 27J |
| 101mm-200mm | 235Mpa | 400-540Mpa | 19% | 20 | 27J | |
| 201mm-400mm | 215Mpa | 380-540Mpa | 18% | 20 | 27J | |
| The min impact energy is longitudinal energy | ||||||
If you need them more, you could check them in our website of stock warehouse or contract us by email
If you have any order in this steel grade En10025-2 S275jr steel plate from gangsteel, please inquiry us soon.