High Steels

Standard: EN 10025-6:2004, European standard for hot-rolled structural . Part 6 – Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Gangsteel produced and export EN10025-6 high strength S690Q steel plate, We had min 1000tons stock for high strength S690Q equal grade and we also provide the cutting service with cnc, water cutting or laser cutting. Related keywords:en s690q,en 10025 s690ql,en 10025-6 s690q,en 10137 2 grade s690q,en 10025-6 s690ql equivalent astm,s690ql en 10025,s690q en 10025-6,en 10025 s690ql1,s690q en 10137-2,en 10137-2 s690ql,s690ql en 10025-6,en 10025 s690q,en 10025 steel,en 10025-s355j2men 10025-2 s355jr,en 10025 astm equivalent,en 10025-6 s690ql,en 10025 s690ql,en 10025 steel equivalent,en 10025 s355k2g4,en 10025-6 s690ql equivalent astm,en 10025-6 s690q,bs en 10025-6-s690ql,acero en 10025-6 s690ql,en 10025 s690ql1,en 10025 p 6 2004 s690ql,en 10025-1 equivalent,ss-en 10025-6 s690ql and en 10025-6 grade s690ql.

With odd steels, the yield energy reduces because the plate thickness will increase, and that is reflected in the materials standards. With these steels designers are capable of utilise the next yield stress for thicker plates, but additionally design extra efficient metal bridges by reducing the flange thickness. 1.1.2.three HIGH STRENGTH WEATHERING STEEL High energy weathering steels are excessive strength low alloy steels, which under certain atmospheric circumstances give an enhanced resistance to rusting compared to that of strange carbon manganese steels by forming a protecting layer on the outer floor.

Strength Steel Content. High Strength Steels (Hsla)

1.1.3 Chemical composition of structural HSS Depending on the fabric properties required for a particular application, the amount and kinds of alloying components vary in chemical composition of HSS. These variations in chemical composition accompanied with high quality in fabrication process, determine the ultimate properties of excessive power steel grades. It just isn’t the purpose of this research to refer extensively in the chemical composition of all differing types/classes of excessive energy steels mentioned in the earlier section, after all. Some common info has already been supplied for HSLA steels, anyway.

  • They provide high strength to weight ratios, excellent weldability, improved toughness and adequate deformation capability .
  • Quality normal EN cowl these steels as much as grades S960 but design normal EN offers further design rules solely up to S700 metal grades.
  • Therefore, for sensible reasons this research focuses on the range of S500-S700 (Q&T), that are coated by the Eurocodes.
  • They additionally provide substantial weight, thus value, savings and are coated by the European standards.

Steel Grade Xinsteel

In this paper, a sequence of isothermal and anisothermal elevated temperature tests are performed on two commercially-out there metal grades . Following a detailed description of the tests, the results are analysed to find out strength and stiffness reduction factors at elevated temperatures and these values are in contrast with literature and EN . It was discovered that the results for S700MC, for which there is restricted information within the literature, confirmed better strength retention properties than S690QL at elevated temperatures. The results also showed that under isothermal circumstances, the steerage for the elastic moduli of those materials may be unconservative and overly optimistic.

Eurocode three and AISC fashions have been unconservative for predicting yield strength however conservative for elastic moduli. The stress-strain relationships of HSA800 at elevated temperatures have been developed utilizing Ramberg-Osgood model and so they agreed well with the take a look at outcomes as much as 2% pressure. The design principles for high power steel structures uncovered to fireplace are beneath development.

Yield Strength Carbon Steel S550q S690q And So On

无标题文档

S690Q is stunning yield quality real steels review in the quenched and tempered. The picture S is relating steel, 690 for the base yield quality in thickness under 50mm.The Symbol Q mean the vehicle condition in secured and tempered. S690q could be through the 20-temperature impact and the significance is 30J.Definition of BS7608 fatigue classes for structural steels Concerning the oxy fuel cutting, the Loga mean test values of S355M and S690Q are lower than the corresponding Loga limit values obtained for the design class B, so class B cannot be applied strictly to S355M and S690Q with oxy fuel cut edges. Consequently, the analysis followed here provides the same fatigue class for oxy fuel cut straight Down Loadstone Supplier.Gangsteel supply high strength steel plates in S690Q,S690QL,S690QL1,S890Q,S960Q,S890QL
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Grade

Standards

Country

S690QL EN10137-2 EN10025-6:2004

EN

EUROPE

A709-100

ASTM

USA

TStE690V DILLIMAX 690 NAXTRA 70

DIN, WNr

GERMANY

E690T E690TFP S690T

AFNOR/ NF A36- 204

FRANCE

FeE690VKT

EN

EUROPEAN (OLD)

2625 WELDOX 700

SS

SWEDON

E690

ISO 4952

INTER

JFE HITEN 780LE

JIS

JAPAN

ALFORM 700

AUSTRIA

mechanical properties of grade EN10025-6 S690Q

 

Minimum yield strength – ReH
MPa

Tensile strength Rm
MPa

Minimum elongation – A
Lo = 5,65* √So (%)

Steel grade

Nominal thickness
mm

Nominal thickness
mm

 

>3
≤50

>50
≤100

>100
≤150

>3
≤50

>50
≤100

>100
≤150

S690Q

690

650

630

770-940

760-930

710-900

14

EN10025-6 Notch impact test.
Notch impact test – longitudinal. Minimum values of impact energy for impact tests on longitudinal V-notch test pieces for quenched and tempered steel

EN10025 S690Q Structural Steel. EN10025:6:2004 Hot Rolled S690Q, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate notch impact tested in longitudinal direction to the rolling direction at 40degree C, thus being excellent in forming and Pharmacia ita welding properties that achieve another higher level of beauty and durability in steel engineering structure. Steel Plate 2.25Cr1Mo0.25V(H) S690QSteel Plate 2.25Cr1Mo0.25V(H) Category Pressure Vessel and Boiler Steel Plate ModelWYJ046 2006 Standard Specification is for boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall comply with SA20/SA20M.Optimal welding technology of high strength steel S690Q For the S690Q L steel, the recommended . preheating temperature should be 150

Temperature
°C

-20

0

Min. absorbed energy
J

40

50

Notch impact test – transverse. Minimum values of impact energy for impact tests on transverse V-notch test pieces for quenched and tempered steel, when the impact test on transverse test pieces is agreed at the time of the order.

Temperature
°C

-40

-20

0

Min. absorbed energy
J

27

30

35

The tables below show the chemical composition of grade EN10025-6 S690Q

 

Ladle analysis.
Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified properties.
Nb, Ti, V, Zr shall be at least 0,015 % of a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0,015 % applies to soluble aluminum, this value is regarded as attained if the total aluminum content is at least 0,018 %; in case of dispute the soluble aluminum content shall be determined.

Steel grade

C
max.
%

Mn
max.
%

Si
max.
%

P
max.
%

S
max.
%

B
max.
%

Nb
max.
%

V
max.
%

Ti
max.
%

Cr
max.
%

Mo
max.
%

Ni
max.
%

Cu
max.
%

Mo
max.
%

N
max.
%

Zr
max.
%

CEV
max. %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≤50

>50
≤100

>100
≤150

S690QL

0,20

1,70

0,80

0,020

0,010

0,005

0,06

0,12

0,05

1,50

0,70

2,0

0,50

0,70

0,015

0,15

0,65

0,77

0,83

 

EN10025-6 S690Q Steel Grade Equivalent Table

European old
EU 137 (1983)

France
AFNOR

Sweden
SS

Germany
DIN,WNr

FeE 690 V KT

E690T

2625

TStE690V

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

DIN EN S690Q /S690QL/S690QL1 Condition of Delivery Water quenched and tempered. Typical Applications Heavy road vehicleschassis, dumper bodies. Cranes constructionbooms of mobile cranes. Structural steelworksbridges, bridge components, components for offshore structures. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature suitable for heavy engineering works. Plus, it has good formability and weldability property. Plates are both magnetic and non magnetic in nature. It serves good resistivity towards crevice and pitting cracking subjected to impact loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified industry Rexton steel & alloys are busy in supplying the excellent and desirable quality of S690QL PLATES globally. They are fully focusing on offering clients with the top notch quality of plates and other essential services.

S690Q steel is used in structures subject to extreme loadsmining and heavy construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.Plates of S690Q steel grade MetinvestS690Q structural high strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025 6 standard.S690Q / 1.8931 SteelNumber Chemical composition S690Q Number1.8931 ClassificationAlloy special steel with specified minimum values of impact energy at temperatures not lower than 20 °C StandardEN 10025 62004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Our S690Ql is a structural metallic grade and is produced to offer high yield power throughout utilization. S690QL plates have bigger payload functionality and are vitality efficient, hence could be utilized in leaner constructions.

Www Klmtechgroup.Com Table Of Content

Structures constructed utilizing such supplies might behave in another way after they’re heated and cooled down (e.g. throughout and after a hearth situation). This experimental examine investigated the mechanical properties of reheated, quenched and tempered HSS plate manufactured to grade S690 at elevated temperatures as well as its residual strength after heating and cooling down. It is found out that whereas RQT-S690 HSS confirmed good resistance to low temperature (below four hundred °C) heating, critical deterioration in power would happen at greater temperatures and its submit-fire mechanical properties are completely different from those of conventional scorching-rolled normal strength steels.

High-energy low-alloy steels, or microalloyed steels, are designed to provide better mechanical properties and/or larger resistance to atmospheric corrosion than typical carbon steels . The materials EN10025-6 S690Q steel plate supplier is preferably produced by a thermomechanical rolling course of, which maximizes grain refinement as a basis for improved mechanical properties.

The above-talked about observations on the studied buildings are made utilizing a 3-stage mechanism which is developed for decoding the deformation response. 1 Material 1.1 High Strength Steel 1.1.1 General High energy steel is a brand new technology of metal material exhibiting improved properties over typical metal grades (e.g. S235, S355, and so on.).

EN 10025-6 S690Q strength steel hss

Microalloyed or High Strength Low Alloy steels (, , and ) represent an essential category of steels estimated to be around 12% of complete world steel production . High Strength Low Alloy steels contain a low share of microalloying components (beneath 0.15% in total) and vary from different steels in that, they aren’t made to satisfy a selected chemical composition, but somewhat to specific mechanical properties. They typically comprise 0.07 to 0.12% carbon, up to 2% manganese and small additions of niobium, vanadium and titanium (normally max. 0.1%) in various combos.

Our S690Q is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025 6 Plates have good forming and welding properties. S690Q plates have higher payload capacity and are energy efficient, hence can be used in leaner structures.S690Q / 1.8928 SteelNumber Chemical composition Nominal thickness = 50(mm) CEV max = 0.65 Nominal thickness from 50 to 100 (mm) CEV max = 0.77 Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified propertiesEN 10025 S690QL Brown McFarlaneHigh strength quenched and tempered steel plate can be easily welded and fabricated. We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described asHigh Strength Quenched and Tempered Steel Plate. If you have requirement for high strength steel plate,please contact us by email.

EN 10025-6 S690Q strength steel hss
Tagged on: