S460ql

Standard: EN 10025-6:2004, European standard for hot-rolled structural . Part 6 – Technical delivery conditions for flat products of high yield structural steels in the quenched and tempered condition

Offer Price Stainless Steel Sheet Plates

Gangsteel produced and export EN10025-6 high strength S690Q steel plate, We had min 1000tons stock for high strength S690Q equal grade and we also provide the cutting service with cnc, water cutting or laser cutting. Related keywords:en s690q,en 10025 s690ql,en 10025-6 s690q,en 10137 2 grade s690q,en 10025-6 s690ql equivalent astm,s690ql en 10025,s690q en 10025-6,en 10025 s690ql1,s690q en 10137-2,en 10137-2 s690ql,s690ql en 10025-6,en 10025 s690q,en 10025 steel,en 10025-s355j2men 10025-2 s355jr,en 10025 astm equivalent,en 10025-6 s690ql,en 10025 s690ql,en 10025 steel equivalent,en 10025 s355k2g4,en 10025-6 s690ql equivalent astm,en 10025-6 s690q,bs en 10025-6-s690ql,acero en 10025-6 s690ql,en 10025 s690ql1,en 10025 p 6 2004 s690ql,en 10025-1 equivalent,ss-en 10025-6 s690ql and en 10025-6 grade s690ql.

The measured internet slenderness values of the tubes ranged from 15.5 to 46.0. The take a look at strengths obtained from this research are in contrast with the design strengths obtained utilizing the current North American Specification, Australia Standard, European Code and Chinese Code for chilly-fashioned metal constructions. It is shown that the design strengths predicted by the specs are both unreliable or too conservative.

无标题文档

S690Q is stunning yield quality real steels review in the quenched and tempered. The picture S is relating steel, 690 for the base yield quality in thickness under 50mm.The Symbol Q mean the vehicle condition in secured and tempered. S690q could be through the 20-temperature impact and the significance is 30J.Definition of BS7608 fatigue classes for structural steels Concerning the oxy fuel cutting, the Loga mean test values of S355M and S690Q are lower than the corresponding Loga limit values obtained for the design class B, so class B cannot be applied strictly to S355M and S690Q with oxy fuel cut edges. Consequently, the analysis followed here provides the same fatigue class for oxy fuel cut straight Down Loadstone Supplier.Gangsteel supply high strength steel plates in S690Q,S690QL,S690QL1,S890Q,S960Q,S890QL
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Grade

Standards

Country

S690QL EN10137-2 EN10025-6:2004

EN

EUROPE

A709-100

ASTM

USA

TStE690V DILLIMAX 690 NAXTRA 70

DIN, WNr

GERMANY

E690T E690TFP S690T

AFNOR/ NF A36- 204

FRANCE

FeE690VKT

EN

EUROPEAN (OLD)

2625 WELDOX 700

SS

SWEDON

E690

ISO 4952

INTER

JFE HITEN 780LE

JIS

JAPAN

ALFORM 700

AUSTRIA

mechanical properties of grade EN10025-6 S690Q

 

Minimum yield strength – ReH
MPa

Tensile strength Rm
MPa

Minimum elongation – A
Lo = 5,65* √So (%)

Steel grade

Nominal thickness
mm

Nominal thickness
mm

 

>3
≤50

>50
≤100

>100
≤150

>3
≤50

>50
≤100

>100
≤150

S690Q

690

650

630

770-940

760-930

710-900

14

EN10025-6 Notch impact test.
Notch impact test – longitudinal. Minimum values of impact energy for impact tests on longitudinal V-notch test pieces for quenched and tempered steel

EN10025 S690Q Structural Steel. EN10025:6:2004 Hot Rolled S690Q, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate notch impact tested in longitudinal direction to the rolling direction at 40degree C, thus being excellent in forming and Pharmacia ita welding properties that achieve another higher level of beauty and durability in steel engineering structure. Steel Plate 2.25Cr1Mo0.25V(H) S690QSteel Plate 2.25Cr1Mo0.25V(H) Category Pressure Vessel and Boiler Steel Plate ModelWYJ046 2006 Standard Specification is for boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall comply with SA20/SA20M.Optimal welding technology of high strength steel S690Q For the S690Q L steel, the recommended . preheating temperature should be 150

Temperature
°C

-20

0

Min. absorbed energy
J

40

50

Notch impact test – transverse. Minimum values of impact energy for impact tests on transverse V-notch test pieces for quenched and tempered steel, when the impact test on transverse test pieces is agreed at the time of the order.

Temperature
°C

-40

-20

0

Min. absorbed energy
J

27

30

35

The tables below show the chemical composition of grade EN10025-6 S690Q

 

Ladle analysis.
Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified properties.
Nb, Ti, V, Zr shall be at least 0,015 % of a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0,015 % applies to soluble aluminum, this value is regarded as attained if the total aluminum content is at least 0,018 %; in case of dispute the soluble aluminum content shall be determined.

Steel grade

C
max.
%

Mn
max.
%

Si
max.
%

P
max.
%

S
max.
%

B
max.
%

Nb
max.
%

V
max.
%

Ti
max.
%

Cr
max.
%

Mo
max.
%

Ni
max.
%

Cu
max.
%

Mo
max.
%

N
max.
%

Zr
max.
%

CEV
max. %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≤50

>50
≤100

>100
≤150

S690QL

0,20

1,70

0,80

0,020

0,010

0,005

0,06

0,12

0,05

1,50

0,70

2,0

0,50

0,70

0,015

0,15

0,65

0,77

0,83

 

EN10025-6 S690Q Steel Grade Equivalent Table

European old
EU 137 (1983)

France
AFNOR

Sweden
SS

Germany
DIN,WNr

FeE 690 V KT

E690T

2625

TStE690V

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

There are 1,241 yield power metal suppliers, mainly located in Asia. The top supplying nation or area is China, which provide a hundred% of yield power metal respectively. Strenx®/Domex® 100XF is a thermostatically rolled sheet, one hundred% iron ore based product with a minimum yield power of 100ksi. Strenx/Domex 100XF is good in purposes the place its excessive power and wonderful cold forming traits can cut back general manufacturing costs. Investigate the bearing capability of high energy metal connection and hybrid connection between excessive power steels and mild steels.

Hot-rolled plates,sheets and strips Product Dimensions,mm Steel grade Standards for chemical width size; plates and sheets 2.5-three. S235JR; S235J0; S235J2; S275JR; S275J0; S275J2; S355JR; S355J0; S355J2 DIN EN by settlement between the purchaser and the supplier on the time mechanical properties SteelHot-rolled plates,sheets and strips Product Dimensions,mm Steel grade Standards for chemical width size; plates and sheets 2.5-three. AS 1444 Wrought Alloy Steels Standard,Hardenability Series and Hardened and Tempered to Designated Mechanical Properties. We offer excessive diagram s690ql steel plate at manage value.

EN 10025-6 S690Q strength steel fasteners

With years of expertise in manufacturing s690q steel plate we offer top quality, decrease price however one of the best service. Comparing with the metal grades S690QL and S690QL1,S690Q has a more leisure restricted on the chemical elements P and S.Maximum P% is 0.025,Maximum S% is 0.015.For different main alloy components they’re the same restricted.S690QL plates have larger payload capability and are energy efficient, therefore can be utilized in leaner constructions. S890QL. S890QL is a structural metal grade with a good greater yield power than S690QL.

DIN EN S690Q /S690QL/S690QL1 Condition of Delivery Water quenched and tempered. Typical Applications Heavy road vehicleschassis, dumper bodies. Cranes constructionbooms of mobile cranes. Structural steelworksbridges, bridge components, components for offshore structures. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature suitable for heavy engineering works. Plus, it has good formability and weldability property. Plates are both magnetic and non magnetic in nature. It serves good resistivity towards crevice and pitting cracking subjected to impact loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified industry Rexton steel & alloys are busy in supplying the excellent and desirable quality of S690QL PLATES globally. They are fully focusing on offering clients with the top notch quality of plates and other essential services.

S690Q steel is used in structures subject to extreme loadsmining and heavy construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.Plates of S690Q steel grade MetinvestS690Q structural high strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025 6 standard.S690Q / 1.8931 SteelNumber Chemical composition S690Q Number1.8931 ClassificationAlloy special steel with specified minimum values of impact energy at temperatures not lower than 20 °C StandardEN 10025 62004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

  • A total of 15 bolted connections fabricated from three grades of excessive energy metal with the nominal yield strengths of 550 MPa, 690 MPa and 890 MPa were examined.
  • The results of finish distance and metal grade on the bolt bearing habits had been evaluated.
  • A regression analysis was performed based on the check information and those from the literature so that a more general technique was proposed to predict the bolt bearing resistance on normal power and high strength metal plate.
  • The bearing resistances of the bolt on various high strength plates had been decided and compared with respect to the tensile power of the plates.
  • The test results were compared with Eurocode 3 and AISC predictions and it was discovered that Eurocode 3 might be used conservatively to foretell the bolt bearing resistance on excessive strength steel with nominal yield strength up to 890 MPa whereas AISC technique tends to overestimate the bearing resistance of the bolted connection.

On every metal, pairs of check coupons are butt welded, in PA place, using gas metal arc welding, GMAW, course of and 82% Ar + 18% CO 2 shielding fuel. bolt hole is enough to meet the deformation demand of compatibility in multi-bolt connection even with an meant bolt gap misalignment of two mm for M24 high strength bolt. When no partial or safety components are considered, the unique formulae of Eurocode3 already has sufficient security whereas AISC gives unsafe predictions. Numerical fashions have been established and verified by take a look at results. With the obtained outcomes, the total-vary distribution of inner load among totally different bolts could be divided into four stages.

Q690 Steel, Q690c Q690d Q690e Composition, Properties Q690e Steel Plate Equivalent

Therefore, because the chief-editor institute, Tsinghua University has organized 34 institutes together with universities, design and analysis institutes, steel structure fabricators, and metal manufacturers, to codify a brand new code, i.e. Design Specification of High Strength Steel Structures in China.

One of the elemental elements of the second-rotation habits of a steel or composite partially restrained connection is the load-deformation behavior related to excessive-strength bolts bearing on steel plates. For many PR connections, the writers consider that this bearing habits may be approximated by the conduct of a single bolt lap plate connection. One of the primary parts of the lap plate connection behavior is the local load-deformation conduct related to a single bolt bearing on a single plate.

S690ql Steel Plates

EN S355J2G3, S355J2+N High Yield Strength Structural Steel Plate. S355J2G3 and S355J2+N are the identical steel EN10025-6 S690Q steel plate supplier grades as each grades delivery situation are normalized.

S690ql Vs S700mc

The result’s to put toughness and ductility again in to the steel and, though a few of the yield energy of the quenched metal is lost, the top result of the quenching and tempering process is to supply a powerful metal which is also easy to weld, bend, and fabricate generally. S690QL A high power structural steel equipped in quenched and tempered condition.

Our S690Q is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025 6 Plates have good forming and welding properties. S690Q plates have higher payload capacity and are energy efficient, hence can be used in leaner structures.S690Q / 1.8928 SteelNumber Chemical composition Nominal thickness = 50(mm) CEV max = 0.65 Nominal thickness from 50 to 100 (mm) CEV max = 0.77 Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified propertiesEN 10025 S690QL Brown McFarlaneHigh strength quenched and tempered steel plate can be easily welded and fabricated. We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described asHigh Strength Quenched and Tempered Steel Plate. If you have requirement for high strength steel plate,please contact us by email.

EN 10025-6 S690Q strength steel
Tagged on: