EN 10025-6 S620Q strength steel grades used in north america

Gangsteel produce and supply materials of EN10025-6 S620q steel and equal S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.

Numerical analyses and experimental comparisons had been utilized utilizing three warmth enter values (10, 14, and 17 kJ/cm) to be able to predict the fields during welding. Experimental analysis was carried out of the microstructure and microhardness habits in a number of HAZ areas. S620Q, S620QL, S620QL1 Plates have higher payload capacity and are power environment friendly, hence can be utilized in leaner constructions. This steel is utilized in other applications such as heavy transportation, building industry, machine building, and lifting tools. We can offer EN S620Q strain vessel metal plates in a variety of thickness and at affordable prices. EN S620Q is both obtainable as ex–stock or instantly shipped from the mill to our customers across the globe.

Bs En 10025

S620QL steel plate

  1. What is EN 10025-6 S620Q steel plat?
    EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of steels. delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

  EN 10137-2: 1996 S620Q  Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels

  1. What is EN 10025-6 S620Q OR 1.8914 Chemical composition %   of   steel  EN 10025-6  S620Q (1.8914):   EN 10025-6-2004

C

Si

Mn

Ni

P

S

Cr

Mo

V

N

Nb

Ti

Cu

Zr

B

CEV

max   0.2

max   0.8

max   1.7

max   2

max   0.025

max   0.015

max   1.5

max   0.7

max   0.12

max   0.015

max   0.06

max   0.05

max   0.5

max   0.15

max   0.005

max   0.83

 

  1. What is Mechanical properties of   steel   EN 10025-6 S620Q (1.8914)?

Nominal thickness (mm):  

3 – 100

100 – 150

Rm – Tensile strength (MPa)

700-890

650-830

  1. What is Equivalent grades of   steel  EN10025-6 S620Q (1.8914)

EU
EN

Germany
DIN,WNr

France
AFNOR

European old
EN

S620Q

StE620V

E620TR

FeE620V

 

EN10025-6 EQUAL Grade stock list in China warehouse 

 

Grade

size mm

Thick mm

Wide mm

Long mm

Tons

Quantity

High-strength structural stee plate

BS960E

7*1600*11300

7

1600

11300

2.023

2

 

Q550CFD

16*2500*12000

16

2500

12000

3.768

1

 

Q550CFD

16*2500*12000

16

2500

12000

3.768

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

20*2500*12000

20

2500

12000

4.71

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q550CFD

36*2500*9500

36

2500

9500

6.712

1

 

Q690CFD

30*2550*10640

30

2550

10640

6.39

1

 

SC960E

30*1550*5800

30

1550

5800

2.117

1

 

NQB-S690QL

20*1700*11000

20

1700

11000

2.936

1

 

BS700MCK2

8*1500*13000

8

1500

13000

1.227

1

 

BWELDY620QL6

12*2400*6220

12

2400

6220

1.406

1

 

BWELDY620QL6

12*2400*9000

12

2400

9000

2.035

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.239

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

5.181

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

4.71

1

 

BS700MCK2

10*1500*4000

10

1500

4000

1.884

4

 

BS700MCK2

10*1500*6000

10

1500

6000

2.12

1

 

BS700MCK2

10*1500*6000

10

1500

6000

0.707

1

 

BS700MCK2

10*1500*6000

10

1500

6000

0.706

1

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

2

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

1

 

BS700MCK2

12*1500*12000

12

1500

12000

3.391

1

 

BS700MCK2

12*1500*13000

12

1500

13000

1.837

1

 

BS700MCK2

12*1500*4000

12

1500

4000

1.696

1

 

BS700MCK2

12*1500*4000

12

1500

4000

4.522

1

 

BS700MCK2

12*1500*4000

12

1500

4000

4.522

1


Details of the fracture floor, together with the weld root penetration and the angle of fracture had been measured at various locations alongside the weld size. Chhajed Steel and passes on a retailer of unbelievable yield cool trim metal plate with guaranteed mechanical properties, wonderful chilly formability, and an immaculate surface finish.The supplies is heat handled using the duvet and mood process and has stunning bowing and welding properties. In order to ensure that the tensile power of the weld metal fulfils the necessities of the underside metal, the warmth enter and interpass temperature must be restricted throughout welding. Experience has confirmed that the welding circumstances should be chosen so that the cooling time t eight / 5 does not exceed 20 seconds. Depending on the thickness of the product and the manufacturing situations, the producer could add to the metal one or a number of alloying elements as much as the maximum values given to be able to obtain the desired properties.

  • Depending on the sort of metallic which is used, a correct welding method and sufficient filler supplies must be utilized.
  • The present paper describes the have an effect on of Mn, Ni, Mo, Cr, V in WMD on the behaviour of metal construction particularly for low temperature service.
  • The major function of that circumstances is said with automotive physique supplies, welding know-how, state of stress and temperature.
  • ST52 three, DIN17100 ST52 3, ST52 three Steel Plate, ST52 three metal manufacturing unit ST52 three, DIN17100 ST52 3, ST52 three Steel Plate, ST52 three steel manufacturing unit .

abs grade ah36 shipbuilding and offshore industries steel Has been dedicated to the of export steel enterprise more than 10 years. Our service entails every kind of steel product , along with raw provides and processed completed merchandise. The procedure of plasticity-based distortion evaluation for directly mapping cumulative plastic strains into elastic fashions utilizing equal thermal strains was developed and utilized to the investigation of the attribute relationship between cumulative plastic strains and angular distortion in fillet welded thin EN S690Q metal plate supplier-plate T-joints. Plasticity-primarily based distortion evaluation successfully predicted the entire angular distortion with an accuracy of ninety seven% in contrast with angular distortion obtained from the elastic-plastic analysis, demonstrating the validity of the distinctive relationship between cumulative plastic strains and distortions and the applicability of linear elastic models in welding-induced-distortion analysis. The PDA procedure additionally supplied the quantitative relationship between six cumulative plastic pressure elements and angular distortion of fillet welded T-joints. Based on the obtained outcomes an estimate was supplied regarding the weldability of S 960 QL metal as well as the proposal for extra analysis. The research evaluates numerically and experimentally the impact of welding warmth enter parameters on the microstructure and hardness of the warmth-affected zone of quenched and tempered and thermo-mechanically managed course of 690-MPa excessive-strength steel.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: Admin@gangsteel.com
Phone: TEL: 0086-13598879167

We produce and export EN S620Q high strength steel plate to max thickness 300mm
We have 3000tons High strength stock list steel plate, Faster delivery, Competitive price,

Unitedsteel Plate Factory are specialised in producing and exporting , S355K2, S355K2 and So on. Low alloy and excessive energy steel plate, heavy plate and extensive, heavy plate, Which is a big metal plate supplier mill. Our inventory warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy steel plates. S355 structural grade carries minimum yield power of 355 N/mm²m, the JR designation confirms that the hyperlink for you metal has undergone longitudinal Chary V-Notch impact testing at 27J at room temperature. Pressure vesselsfixed and portable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is in nature suitable for heavy engineering works. It serves good resistivity in the direction of crevice and pitting cracking subjected to influence hundreds.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified trade Rexton metal & alloys are busy in supplying the excellent and desirable high quality of S690QL PLATES globally. They are absolutely focusing on providing clients with the highest notch high quality of plates and other essential services.

EN metal grade specification is a excessive yield power structural steels in the quenched and tempered condition metal plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.S620QL1,S550Q ,S550QL ,S550QL1, S500Q ,metal plate ,EN S620QL1,S550Q ,S550QL ,S550QL1, S500Q ,metal plate ,EN . EN metal grade specification is a excessive yield vitality structural steels within the quenched and tempered condition metal plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. EN steel grade specification is a excessive yield strength structural steels within EN10025-6 S620Q steel plate supplier the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. Gangsteel supply EN metal grade specification is a high yield strength structural steels within the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. P690Q may be offered as steel plate/ sheet, spherical metal bar, steel tube/pipe, steel stripe, metallic billet, metal ingot, steel wire rods.

EN 10025-6 S620Q-strength 1045 carbon steel

EN 10025-6 S620Q strength steel list
electroslag, cast ring/ block,and so forth.Plates of S690Q metal grade – MetinvestS690Q structural extreme-power steel with minimal yield power of 690 MPa provided in quenched and tempered state of affairs . Technical provide situations for flat products of excessive yield power structural steels inside the quenched and tempered situation.EN Standard major metallic gradeS460Q, S460QL1, S460QL, S500QL, S500Q, S500QL1, S550Q, S550QL, S690Q, S690QL, S890Q, S890QL, S960QL and so on. Gangsteel supply EN steel grade specification is a high yield energy structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. Gangsteel provide EN steel grade specification is a excessive yield energy structural steels in the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. s690q steel carbon steel, Plates of S690Q steel grade MetinvestS690Q structural highstrength metallic with minimal yield power of 690 MPa equipped in quenched and tempered situation .

Equivalent grades of   steel   S620Q (1.8914)Equivalent grades of   steel   S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness +I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated

Plates of S690 metal grade comply with EN normal.S960Q steel plate -S355J2,S35J2G3,S355JR,S235JR Stock S960Q steel is excessive yield energy structural steels inside the quenched and tempered provide state. The symbol S is for structural metal, 960 for the minimum yield energy in thickness beneath 50mm . aluminum sheet aluminum sq. tube 0.25 in metallic stock bar metal stock 3/four secure metallic pipe flat beam RELATED PRODUCTS 1-half of in. EN S620Q S620 Q STEEL PLATE BBNSTEEL Grade EN S620Q Specification THK 3 to 300,Width 1500 to 4050,Length 3000 to Standard Technical supply situations for flat merchandise of excessive yield strength structuralEN S620Q Carbon and Low-alloy High-strength SteelEN S620Q Carbon and Low-alloy High-strength Steel Plate.WHY CHOOSE US? Hot rolled merchandise of structural steels Technical delivery circumstances for flat merchandise of excessive yield energy structural steels in the quenched and tempered condition of this doc, along with half 1, specifies necessities for flat merchandise of excessive yield energy alloy particular steels.
In order to get an influence perform, the check specimens had been designed in order to provoke failure all through the weld. API 5L X65 PSL1 Pipe is a high yield seamless pipe that is modified to go well with offshore structural functions. It is meant to be used in mounted offshore constructions and is designed to operate in the offshore sector.

3. Implementation standards: national standards, metallurgical standards, American ASME, ASTM, Japanese JIS, German DIN, French NF, British BS, European EN, international ISL standards, etc.
4. Production grade; A/B/C/D/E and thickness direction performance Z15 Z25 35.

The most excellent properties are the excessive tensile vitality and impression toughness, at room and at elevated temperatures, as properly. That impedes welding and makes as an imperative to examine completely completely different features of this metallic’s properties along with these of eventual filler metallic. Experiments had been performed on the multi-layered onerous-faced samples produced from the steel for manufacturing of the forging dies. The examine evaluates numerically and experimentally the effect of welding heat input parameters on the microstructure and hardness of the heat-affected zone of quenched and tempered and thermo-mechanically managed course of 690-MPa excessive-power metallic.

EN 10025-6 S620Q strength steel list