Gangsteel supplies ASTM A240 / SA240 stainless steel plate, sheet and strip against an agreed type, edition and delivery condition. ASTM A240/A240M is the chromium and chromium-nickel stainless specification for pressure vessels and general applications; ASME SA-240 is the corresponding ASME text when that Code edition is specified. Corresponding texts are not automatically interchangeable certificates. Chemistry and mechanical requirements are type-specific, so this series page points to the official product page for each listed type rather than inventing a single composition table. This page is a product overview, not a stock list. Related listings are filed under A240/SA240 stainless steel plates and the stainless steel plate family.

Common writings include ASTM A240, SA240 and A240/A240M. Buyers must name the type (for example Type 304 or Type 316L), the contractual edition and the delivery condition on the purchase order.

Common Written Forms

  • ASTM A240 / A240M
  • ASME SA-240 / SA-240M
  • SA240
  • A240 plate

These writings identify the same designation used on this page. Use the complete type, standard edition and delivery condition on the purchase order.

Standard and Delivery Condition

The specification basis for ASTM A240 is ASTM A240/A240M, with ASME SA-240 used only when that Code edition is specified. Buyers must confirm the contractual edition and delivery condition at order review. Annealed condition is the usual published mechanical-table basis for many austenitic types; it is not assumed for every order, and martensitic or duplex types follow the condition required by the ordered text. Gangsteel does not infer a universal welding procedure, preheat or heat-treatment cycle from the type name alone.

Chemical Composition

ASTM A240/A240M lists heat-analysis limits by type. The table below is an index of official Gangsteel product pages, not a chemistry table and not a stock list. Open the type page for the labeled compilation already used on this site.

Mechanical Properties

Mechanical acceptance values are also type-specific and are given on each official type page. Inch-pound and SI values on those pages are independent systems and must not be mixed in one calculation. The overview table below records how the specification is used; it is not a tensile table.

Topic How ASTM A240 / SA240 is used on this site
Product forms A240/A240M covers chromium and chromium-nickel stainless plate, sheet and strip for pressure vessels and general applications. This page does not list mill stock.
Chemistry and mechanicals Limits are type-specific. Use the official product page for the ordered type; this series page does not invent a single chemistry or tensile table for all types.
ASME SA-240 SA-240 is the corresponding ASME text when that Code edition is specified. Corresponding texts are not automatically interchangeable certificates.
Edition Confirm the contractual ASTM or ASME edition at order review. Figures on a type page are labeled as the compilation already used on this site, or as widely published A240/A240M values, not as a substitute for the ordered text.

Available Dimensions

  • A240/A240M covers plate, sheet and strip. The coverage is the standard’s product-form scope, not a Gangsteel mill stock range for ASTM A240.
  • Actual thickness × width × length, quantity and dimensional tolerances must be agreed for the selected mill and project.
  • Provide the type, edition, delivery condition, inspection requirements and processing allowance. Exact availability is confirmed against the enquiry, not assumed from the grade name.

Main Applications

  • Pressure-vessel and general-service stainless plate, sheet and strip specified to a listed A240 type.
  • Architectural, building and fabrication work where the purchase order names the type and edition.
  • Project enquiries that need the official grade page for the selected type rather than a generic stainless description.

Application suitability depends on the design temperature, environment, thickness, fabrication route and the construction or vessel code named on the order. A familiar type name is not automatic approval for a different duty or for an unstated substitute.

Equivalent Grades of ASTM A240

The table lists official Gangsteel product pages that are commonly compared with ASTM A240. A nearby type, a matching UNS family or a similar tensile number does not establish equivalence. Any substitute requires designer and purchaser approval after comparing the contractual edition, product form, chemistry, mechanicals, delivery condition and inspection requirements. Gangsteel does not treat these designations as automatic replacements.

Standard Grade / type UNS Remarks
ASTM A240 / SA-240 ASTM A240 — Official product page on this URL; confirm the contractual edition and delivery condition
ASTM A240 / SA-240 ASTM A240 Type 304 S30400 Commonly compared official Gangsteel product page; not an automatic substitute
ASTM A240 / SA-240 ASTM A240 Type 316 S31600 Commonly compared official Gangsteel product page; not an automatic substitute
ASTM A240 / SA-240 ASTM A240 Type 2205 S32205 Commonly compared official Gangsteel product page; not an automatic substitute

Related Products

Frequently Asked Questions (FAQ)

What does ASTM A240 cover?

ASTM A240 / A240/A240M is the stainless plate, sheet and strip specification for the types listed in that standard. Chemistry and mechanicals are type-specific; use the official product page for the ordered type. Confirm the contractual edition at order review.

Is SA240 the same as ASTM A240?

SA-240 is the corresponding ASME text when that Code edition is specified. It is not automatically the same certificate as ASTM A240. State the required text and edition on the purchase order.

Does Gangsteel keep ASTM A240 plate in a published stock range?

This ASTM A240 series page is a product overview, not a stock list. Thickness, width, length and quantity are confirmed against the enquiry for the selected type.

Can one ASTM A240 type replace another without review?

No. Types such as 304, 304L, 316L or 2205 are commonly compared and are not automatic substitutes. Designer and purchaser approval is required after comparing the ordered type, edition and inspection requirements.

For sizes, edition and inspection requirements on ASTM A240, contact Gangsteel or visit the Gangsteel homepage. This page does not replace the contractual specification text.

ASTM A240 / SA240 Stainless Steel Plate
Tagged on: