Gangsteel supplies ASTM A240 Type 441 stainless steel, also identified as UNS S44100 against an agreed ASTM A240/A240M or ASME SA-240 edition, delivery condition and dimensions. Common writings include ASTM A240 Type 441, UNS S44100, Type 441. SA-240 is the corresponding ASME text when that Code edition is specified; corresponding texts are not automatically interchangeable certificates. This page is a product overview, not a stock list. Related listings are filed under A240/SA240 stainless steel plates and the stainless steel plate family.

Common Written Forms

  • ASTM A240 Type 441
  • UNS S44100
  • Type 441

These writings identify the same designation used on this page. Use the complete type, standard edition and delivery condition on the purchase order.

Standard and Delivery Condition

The specification basis for ASTM A240 Type 441 is ASTM A240/A240M, with ASME SA-240 used only when that Code edition is specified. Buyers must confirm the contractual edition and delivery condition at order review. Annealed condition is the usual published mechanical-table basis for many austenitic types; it is not assumed for every order, and martensitic or duplex types follow the condition required by the ordered text. Gangsteel does not infer a universal welding procedure, preheat or heat-treatment cycle from the type name alone.

Chemical Composition

Figures in the ASTM A240 Type 441 table reuse the compilation already used on this site, or are labeled as widely published ASTM A240/A240M heat-analysis limits. They are specification limits, not typical heat results, and they are not a substitute for the contractual edition. Confirm the ordered edition, product form and any supplementary analysis requirements.

Element (heat analysis) ASTM A240 UNS S44100 (Type 441) Basis / conditions
C, max % 0.030 Widely published A240/A240M heat-analysis maximum from the held Table 1 extract
Mn, max % 1.00 Widely published A240/A240M heat-analysis maximum
P, max % 0.040 Widely published A240/A240M heat-analysis maximum
S, max % 0.030 Widely published A240/A240M heat-analysis maximum
Si, max % 1.00 Widely published A240/A240M heat-analysis maximum
Cr, % 17.5–19.5 Widely published A240/A240M range
Ni, max % 1.00 Widely published A240/A240M heat-analysis maximum
N, max % 0.030 Widely published A240/A240M heat-analysis maximum
Ti, % 0.1–0.5 Widely published A240/A240M “other elements” range from the held extract
Nb [0.3+(9×C)] min, 0.90 max Widely published A240/A240M “other elements” rule from the held extract

Mechanical Properties

Mechanical values for ASTM A240 Type 441 reuse the compilation already used on this site, or are labeled as widely published A240/A240M annealed minima and hardness maxima where that is the basis of the table. Inch-pound and SI figures are independent systems and must not be mixed in one calculation. Condition, product form and edition must match the purchase order. These values are not a welding or heat-treatment procedure.

Property, annealed UNS S44100 (Type 441) Inch-pound SI
Tensile strength, min 60 ksi 415 MPa
Yield strength, 0.2% offset, min 30 ksi 205 MPa
Elongation, min 18% 18%
Hardness, max 183 HBW / 89 HRBW 183 HBW / 89 HRBW

Available Dimensions

  • A240/A240M covers plate, sheet and strip. The coverage is the standard’s product-form scope, not a Gangsteel mill stock range for ASTM A240 Type 441.
  • Actual thickness × width × length, quantity and dimensional tolerances must be agreed for the selected mill and project.
  • Provide the type, edition, delivery condition, inspection requirements and processing allowance. Exact availability is confirmed against the enquiry, not assumed from the grade name.

Main Applications

  • Stabilized ferritic stainless plate specified as Type 441 / UNS S44100.
  • Exhaust and general ferritic fabrications whose design names 441 rather than Type 409 or 430.
  • Orders that must keep Type 441 distinct from Type 304.

Application suitability depends on the design temperature, environment, thickness, fabrication route and the construction or vessel code named on the order. A familiar type name is not automatic approval for a different duty or for an unstated substitute.

Equivalent Grades of ASTM A240 Type 441

The table lists official Gangsteel product pages that are commonly compared with ASTM A240 Type 441. A nearby type, a matching UNS family or a similar tensile number does not establish equivalence. Any substitute requires designer and purchaser approval after comparing the contractual edition, product form, chemistry, mechanicals, delivery condition and inspection requirements. Gangsteel does not treat these designations as automatic replacements.

Standard Grade / type UNS Remarks
ASTM A240 / SA-240 ASTM A240 Type 441 S44100 Official product page on this URL; confirm the contractual edition and delivery condition
ASTM A240 / SA-240 ASTM A240 Type 304 S30400 Commonly compared official Gangsteel product page; not an automatic substitute
ASTM A240 / SA-240 ASTM A240 Type 410S S41008 Commonly compared official Gangsteel product page; not an automatic substitute

Related Products

Frequently Asked Questions (FAQ)

What is ASTM A240 Type 441?

ASTM A240 Type 441 (UNS S44100) is the designation used on this official product page. Common written forms are listed above. Use the complete type, standard edition and delivery condition on the purchase order.

Is ASTM A240 Type 441 interchangeable with a similar type?

No. A nearby type or a matching tensile number does not make a substitute for ASTM A240 Type 441. Any replacement requires designer and purchaser approval after comparing chemistry, mechanicals, condition, product form and the contractual edition.

Does ASTM A240 Type 441 have a published Gangsteel stock size range?

No. This ASTM A240 Type 441 page is a product overview, not a stock list. Actual thickness × width × length and quantity are agreed for the enquiry.

How should a purchase order identify ASTM A240 Type 441?

State ASTM A240 Type 441, UNS S44100, the ASTM A240/A240M or ASME SA-240 edition, delivery condition, dimensions, quantity and inspection requirements. Corresponding ASME and ASTM texts are not automatically interchangeable certificates.

For sizes, edition and inspection requirements on ASTM A240 Type 441, contact Gangsteel or visit the Gangsteel homepage. This page does not replace the contractual specification text.

ASTM A240 Type 441 Stainless Steel Plate
Tagged on: