Gangsteel supplies ASTM A240 Type 310S stainless steel, also identified as UNS S31008 against an agreed ASTM A240/A240M or ASME SA-240 edition, delivery condition and dimensions. Common writings include ASTM A240 Type 310S, A240 310S, UNS S31008. SA-240 is the corresponding ASME text when that Code edition is specified; corresponding texts are not automatically interchangeable certificates. This page is a product overview, not a stock list. Related listings are filed under A240/SA240 stainless steel plates and the stainless steel plate family.
Common Written Forms
- ASTM A240 Type 310S
- A240 310S
- SA-240 Type 310S
- UNS S31008
These writings identify the same designation used on this page. Use the complete type, standard edition and delivery condition on the purchase order.
Standard and Delivery Condition
The specification basis for ASTM A240 Type 310S is ASTM A240/A240M, with ASME SA-240 used only when that Code edition is specified. Buyers must confirm the contractual edition and delivery condition at order review. Annealed condition is the usual published mechanical-table basis for many austenitic types; it is not assumed for every order, and martensitic or duplex types follow the condition required by the ordered text. Gangsteel does not infer a universal welding procedure, preheat or heat-treatment cycle from the type name alone.
Chemical Composition
Figures in the ASTM A240 Type 310S table reuse the compilation already used on this site, or are labeled as widely published ASTM A240/A240M heat-analysis limits. They are specification limits, not typical heat results, and they are not a substitute for the contractual edition. Confirm the ordered edition, product form and any supplementary analysis requirements.
| Element (heat analysis) | ASTM A240 Type 310S (UNS S31008) | Basis / conditions |
|---|---|---|
| C, max % | 0.08 | Reuse of the Type 310S compilation already published on this site |
| Mn, max % | 2.00 | Widely published A240/A240M heat-analysis maximum |
| P, max % | 0.045 | Widely published A240/A240M heat-analysis maximum |
| S, max % | 0.030 | Widely published A240/A240M heat-analysis maximum |
| Si, max % | 1.50 | Reuse of the Type 310S compilation already published on this site; higher than the 0.75% maximum used for Type 304 |
| Cr, % | 24.0–26.0 | Reuse of the Type 310S compilation already published on this site |
| Ni, % | 19.0–22.0 | Reuse of the Type 310S compilation already published on this site |
Mechanical Properties
Mechanical values for ASTM A240 Type 310S reuse the compilation already used on this site, or are labeled as widely published A240/A240M annealed minima and hardness maxima where that is the basis of the table. Inch-pound and SI figures are independent systems and must not be mixed in one calculation. Condition, product form and edition must match the purchase order. These values are not a welding or heat-treatment procedure.
| Property, annealed Type 310S (UNS S31008) | Inch-pound | SI |
|---|---|---|
| Tensile strength, min | 75 ksi | 515 MPa |
| Yield strength, 0.2% offset, min | 30 ksi | 205 MPa |
| Elongation, min | 40% | 40% |
| Hardness, max | 217 HBW / 95 HRBW | 217 HBW / 95 HRBW |
Available Dimensions
- A240/A240M covers plate, sheet and strip. The coverage is the standard’s product-form scope, not a Gangsteel mill stock range for ASTM A240 Type 310S.
- Actual thickness × width × length, quantity and dimensional tolerances must be agreed for the selected mill and project.
- Provide the type, edition, delivery condition, inspection requirements and processing allowance. Exact availability is confirmed against the enquiry, not assumed from the grade name.
Main Applications
- High-chromium, high-nickel austenitic plate specified as Type 310S.
- Heat-resisting fabrications whose design names 310S rather than Type 310 or 310H.
- Orders that must keep the 310S carbon maximum distinct from Type 310.
Application suitability depends on the design temperature, environment, thickness, fabrication route and the construction or vessel code named on the order. A familiar type name is not automatic approval for a different duty or for an unstated substitute.
Equivalent Grades of ASTM A240 Type 310S
The table lists official Gangsteel product pages that are commonly compared with ASTM A240 Type 310S. A nearby type, a matching UNS family or a similar tensile number does not establish equivalence. Any substitute requires designer and purchaser approval after comparing the contractual edition, product form, chemistry, mechanicals, delivery condition and inspection requirements. Gangsteel does not treat these designations as automatic replacements.
| Standard | Grade / type | UNS | Remarks |
|---|---|---|---|
| ASTM A240 / SA-240 | ASTM A240 Type 310S | S31008 | Official product page on this URL; confirm the contractual edition and delivery condition |
| ASTM A240 / SA-240 | ASTM A240 Type 310 | S31000 | Commonly compared official Gangsteel product page; not an automatic substitute |
| ASTM A240 / SA-240 | ASTM A240 Type 304 | S30400 | Commonly compared official Gangsteel product page; not an automatic substitute |
Related Products
- A240/SA240 stainless steel plates — family page
- Stainless steel plate — family page
- ASTM A240 / SA240 Stainless Steel Plate
- ASTM A240 Type 310 Stainless Steel Plate
- ASTM A240 Type 304 Stainless Steel Plate
- ASTM A240 Type 304L Stainless Steel Plate
- ASTM A240 Type 304H Stainless Steel Plate
- ASTM A240 Type 304LN Stainless Steel Plate
- ASTM A240 Type 316 Stainless Steel Plate
- ASTM A240 Type 316L Stainless Steel Plate
Frequently Asked Questions (FAQ)
What is ASTM A240 Type 310S?
ASTM A240 Type 310S (UNS S31008) is the designation used on this official product page. Common written forms are listed above. Use the complete type, standard edition and delivery condition on the purchase order.
Is ASTM A240 Type 310S interchangeable with a similar type?
No. A nearby type or a matching tensile number does not make a substitute for ASTM A240 Type 310S. Any replacement requires designer and purchaser approval after comparing chemistry, mechanicals, condition, product form and the contractual edition.
Does ASTM A240 Type 310S have a published Gangsteel stock size range?
No. This ASTM A240 Type 310S page is a product overview, not a stock list. Actual thickness × width × length and quantity are agreed for the enquiry.
How should a purchase order identify ASTM A240 Type 310S?
State ASTM A240 Type 310S, UNS S31008, the ASTM A240/A240M or ASME SA-240 edition, delivery condition, dimensions, quantity and inspection requirements. Corresponding ASME and ASTM texts are not automatically interchangeable certificates.
For sizes, edition and inspection requirements on ASTM A240 Type 310S, contact Gangsteel or visit the Gangsteel homepage. This page does not replace the contractual specification text.
