ASTM A516 Grade 65, also commonly written as A516GR.65, A516 Gr.65, A516 GR 65 and ASTM A516/A516M Grade 65 [Grade 450], is the inch-pound Grade 65 designation in ASTM A516/A516M. Grade 450 is the SI designation in the same specification, not a converted Grade 65 value. ASME SA516 Grade 65 (SA-516 or SA-516M Grade 65 or Grade 450) is the corresponding ASME family designation, not merely another spelling of the ASTM name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASTM A516 Grade 65.

This page compares ASTM A283 Grade C with ASTM A516 Grade 65. A283 Grade C is a structural carbon-steel plate grade under ASTM A283/A283M, written to A6/A6M general requirements. Grade 65 is a pressure-vessel carbon-manganese plate grade. The Grade C figures below are the official public-reference values already disclosed on ASTM A283 Grade C. The comparison is not a substitution approval.

Structural Plate versus Pressure-Vessel Plate

Topic ASTM A283 Grade C ASTM A516 Grade 65
Type of specification A283/A283M structural carbon-steel plate for general application, not a pressure-vessel specification A516/A516M carbon-manganese plate for moderate and lower-temperature welded vessels where notch toughness matters, with ASME SA516 Grade 65 as the corresponding ASME designation
General requirements A6/A6M structural-product basis A20/A20M (or SA-20)
Notch toughness Not a basic A283 Grade C requirement Improved notch toughness is part of the A516 intended service; a Charpy test still has to be ordered if required

Published Strength References

Property ASTM A283 Grade C ASTM A516 Grade 65 [Grade 450]
Tensile strength 55–75 ksi [380–515 MPa companion], from the SSAB Grade C mill reference with Ferrobend / American Alloy Steel cross-check as used on the official Grade C page; not an official mechanical-table extract 65–85 ksi / 450–585 MPa, ASTM A516/A516M-25 public Scope
Minimum yield strength 30 ksi [205 MPa companion], same SSAB / compilation basis as the official A283 Grade C page 35 ksi, SSAB Grade 65 required properties as used on the official Grade 65 pages. 35 ksi is not published here as 240 MPa or as an official SI specification value
Minimum elongation The official Grade C page states elongation on the same public-reference basis used there, with A6 adjustments where applicable 23% in 2 in. [50 mm] and 19% in 8 in. [200 mm], with A20/A20M or SA-20 adjustments

Chemistry Is Specified Differently

The official ASTM A283 Grade C public-reference chemistry is different in form as well as in value. Carbon is given as a 0.24% heat-analysis maximum; a separate product-carbon limit is not established by that reference, and the blank product-carbon cell is not zero or an implied equality. Manganese is given as 0.90% heat and 0.98% product maxima from the American Alloy Steel compilation used on that page. Phosphorus, sulfur, silicon thickness bands and the conditional 0.20% copper minimum (only when copper steel is specified) have the compilation basis stated on that official page.

Grade 65 chemistry on ASTM A516 Grade 65 is thickness-banded for carbon (0.24 / 0.26 / 0.28 / 0.29 / 0.29, heat = product) with manganese 0.85–1.20% heat and 0.79–1.30% product in both Grade 65 thickness bands, silicon 0.15–0.40% heat and 0.13–0.45% product, and phosphorus and sulfur shown as 0.025 or 0.035 with the official-page source note. ASTM A516 Grade 60 and ASTM A516 Grade 70 are different A516 strength grades, not A283 equivalents. Substitutions require design and project approval.

Frequently Asked Questions (FAQ)

Can ASTM A283 Grade C replace ASTM A516 Grade 65?

Not without the project’s design and material approval. ASTM A283 Grade C is a structural specification. ASTM A516 Grade 65 is a pressure-vessel plate grade. This comparison is not a substitution approval.

Are ASTM A283 Grade C and ASTM A516 Grade 65 the same because both are carbon steel?

No. They share a carbon-steel family but differ in specification, general-requirements basis, intended service, chemistry form and published strength ranges.

Are the strength figures for ASTM A283 Grade C and ASTM A516 Grade 65 official edition extracts?

The Grade 65 tensile range is from the A516/A516M-25 public Scope. The Grade 65 yield is a public-reference required-property figure used on the official Grade 65 pages. Grade C figures are the public references already disclosed on the official A283 Grade C page, not a certified current-edition extract.

Where are the official product pages for ASTM A283 Grade C and ASTM A516 Grade 65?

Start with ASTM A283 Grade C and ASTM A516 Grade 65. Use ASME SA516 Grade 65 when the vessel-plate order is written to the ASME designation.

For plate to ASTM A516/A516M Grade 65 [Grade 450] or ASME SA-516 Grade 65, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.

A283 Grade C vs A516 Grade 65: Structural Plate vs Pressure-Vessel Steel