din 17100 st52 3 equivalent

1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis

gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate

Type 304, the most common grade of stainless-steel with 18% chromium, is immune to roughly 870 °C (1,600 °F). Other gases, such as sulfur dioxide, hydrogen sulfide, carbon monoxide, chlorine, additionally attack stainless-steel.

• The resulting iron oxide surface layer is porous and fragile.
• In addition, as iron oxide occupies a bigger quantity than the original metal, this layer expands and tends to flake and fall away, exposing the underlying metal to further attack.
• Unprotected carbon steel rusts readily when exposed to a mixture of air and moisture.
• This passive film prevents additional corrosion by blocking oxygen diffusion to the steel surface and thus prevents corrosion from spreading into the bulk of the metallic.

Duplex grades are usually preferred because of their corrosion resistance and better energy, allowing a discount of weight and a long life in maritime environments. Stainless steels have a protracted history of application involved with water because of their glorious corrosion resistance. Applications embody a variety of conditions together with plumbing, potable water and wastewater treatment, desalination, and brine remedy. Types 304 and 316 stainless steels are commonplace materials of construction in touch with water. However, with rising chloride contents, larger alloyed stainless steels similar to Type 2205 and tremendous austenitic and tremendous duplex stainless steels are used.

st52-3 plate

As an austenitic stainless steel alloy, it has qualities similar to excessive strength, corrosion resistance, and high concentrations of chromium and nickel. The alloy has a tensile power of 579 MPa and a maximum use temperature of round 800˚C (1,472˚F). Stainless steel is now used as one of the supplies for tramlinks, along with aluminium alloys and carbon steel.

This grade can also be very ductile, and has good weldability enabling its widespread utilization in lots of purposes. Another in style excessive-performing alloy, grade 304 stainless-steel is a sturdy materials when it comes to tensile energy, durability, corrosion, and oxidation resistance. The melting level of chrome steel 304 is reached at temperatures ranging between 2,550 °F – 2,650 °F (1399 °C – 1454 °C).

1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,

DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:

DIN	ASTM	EN	JIS	Chemical Composition											C.E.
				C	Si	Mn	Cr	Mo	Ni	V	W	S	P	CU
17100 St52-3N	A572-50	10025-2:2004 S355J2+N	G3106 SM490YB	max 0.22	max 0.55	max 1.60	–	–	–	–	–	max 0.035	max 0.035	–	max 0.047

St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.

			Chemical Composition (product analysis), %, ≤
Country (Region)	Standard	Steel Grade (Steel number)	C	Si	Mn	P	S	N	Cu	Thickness (d) (mm)	Method of deoxidation
Germany	DIN 17100: 1980	St52-3 (1.0570)	0.22	0.60	1.70	0.065	0.065	–		≤ 30	Fully Killded
			0.24							30 <d ≤100
European Union	EN 10025: 1993	S355J2G3 (1.0570)	0.22	0.60	1.70	0.045	0.045	–		≤ 30
			0.24							30 <d ≤100
	EN 10025-2: 2004	S355J2 (1.0577)	0.22	0.60	1.70	0.035	0.035	–	0.60	≤ 30
			0.24							30 <d ≤100

St52-3 Steel Properties
Physical Properties

• Material St 52-3 Density: 7.85 g/cm3
• Melting point: 1420-1460 °C (2590-2660 °F)

DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate

Thickness (mm)	Yield Strength Reh min (N / mm2)	Tensile Strength Rm min (N / mm2)	Elongation A5 min (%)	Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm.
3<thk<100	315-355	490-630	max 22	27 Joules at -20 C

St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.

			Chemical Composition (ladle analysis), %, ≤
Country (Region)	Standard	Steel Grade (Steel number)	C	Si	Mn	P	S	N	Cu	Thickness (d) (mm)	Method of deoxidation
Germany	DIN 17100: 1980	St52-3 (1.0570)	0.20	0.55	1.60	0.040	0.040	–		≤ 30	Fully Killded
			0.22							30 <d ≤100
European Union	EN 10025: 1993	S355J2G3 (1.0570)	0.20	0.55	1.60	0.035	0.035	–		≤ 30
			0.22							30 <d ≤100
	EN 10025-2: 2004	S355J2 (1.0577)	0.20	0.55	1.60	0.025	0.025	–	0.55	≤ 30
			0.22							30 <d ≤100

DIN17100 ST52-3 EQUIVALENT STEEL GRADES

EN 10025 – 2		EN 10025+A1		?SN	DIN 17100
EN10027-1	EN10027-2	EN10027-1 Grade	EN10027-2 Grade
S235JR2	1.0038	S235JRG2	1.0038	11375	RSt 37-2
S235J0	1.0114	S235J0	1.0114	11378	St 37-3U
	–	S235J2GR3	1.0116	11378	St 37-3N
S235J2	1.0117	S235J2G4	1.0117	–	–
S275JR	1.0044	S275JR	1.0044	11443	St 44-2
S275J0	1.0143	S275J0	1.0143	11445	St 44-3U
	–	S275J2GR3	1.0144	11448	St 44-3N
S275J2	1.0145	S275J2G4	1.0145	–	–
S355JR	1.0045	S355JR	1.0045	11523	St 52-3
S355J0	1.0553	S355J0	1.0553	11523	St 52-3U
	–	S355J2G3	1.057	11503	St 52-3N
S355J2	1.0577	S355J2G4	1.0577	–	–

 

Material St 52-3 Datasheet – 3

	Yield strength (≥ N/mm2); Thickness (d) mm
Steel (Steel number)	d≤16	16< d ≤40	40< d ≤63	63< d ≤80	80< d ≤100	>100
St52-3	355	345	335	325	315	by agreement

Tensile Strength
Material St 52-3 Datasheet – 4

	Tensile strength (≥ N/mm2); Thickness (d) mm
Steel (Steel number)	d<3	3 ≤ d ≤ 100	>100
St 52-3	515-680	490-630	by agreement

Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5

	Elongation (≥, %); Thickness (d), mm
Steel (Steel number)	0.5 ≤d <1	1≤ d <1,5		1,5≤ d <2		2≤ d <2,5		2,5≤ d <3
St52-3U	14	15		16		17		18
St52-3N	12	13		14		15		16
	Elongation (≥, %); Thickness (d), mm
Steel (Steel number)	3 ≤d ≤40		40< d ≤63		63 < d ≤100		>100
St52-3	22		21		20		by agreement
St52-3N	20		19		18

 

The properties of duplex stainless steels are achieved with an overall decrease alloy content than comparable-performing tremendous-austenitic grades, making their use cost-effective for a lot of purposes. The pulp and paper trade was one of the first to extensively use duplex stainless steel.

Today, the oil and gas industry is the most important person and has pushed for more corrosion resistant grades, resulting in the development of super duplex and hyper duplex grades. More lately, the less expensive (and slightly less corrosion-resistant) lean duplex has been developed, mainly for structural applications in constructing and development and in the water business. Type S— is a highly alloyed austenitic chrome steel used for prime temperature application. The excessive chromium and nickel content material give the metal wonderful oxidation resistance as well as high power at high temperature.

Heat-resisting grades EN1.4913 or 1.4923 are used in parts of turbochargers, while other warmth-resisting grades are used for exhaust fuel recirculation and for inlet and exhaust valves. In addition, frequent rail injection methods and their injectors depend on stainless steels. The ease of welding largely is dependent DIN 17100 ST 52-3 upon the kind of stainless steel used. Austenitic stainless steels are the easiest to weld by electrical arc, with weld properties much like these of the base metallic (not chilly-worked).

1.0570 vlastnosti

HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price