Stainless Steel

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

410s material

If large grains are discovered after annealing mildly chilly-worked materials, the annealing temperature must be decreased to 1200 – 1350°F (649 – 732°C). The components ought to then be immersed in a warm answer of 10-20% nitric acid followed by a water rinse to take away any residual iron. ESM supplies Type 410S stainless steel alloy in a variety of totally different types and sizes all of which meet a number of the toughest worldwide standards together with, ASTM A 240 and ASME SA 240. 410S is usually considered to be weldable by the widespread fusion and resistance methods. A major difference could be attributed to the addition of alloy, to manage hardening which results in the necessity for higher warmth input during welding.

It resists corrosion in atmospheric circumstances, recent water, mild organic, and mineral acids, alkalis, and a few chemical compounds. It requires correct cleansing after getting used so as to proceed performing at peak or near-peak ranges after publicity to chlorides in everyday actions like meals preparation or sports actions. The corrosion resistance of Sandmeyer Steel 410S stainless-steel is just like sort 410.

410 SS is mostly used for purposes which contain delicate corrosion, high strength, and warmth resistance. Depending on the appliance and efficiency necessities we also present 410 stainless-steel casting equal, CA15. 410S stainless steel may be simply fashioned by drawing, spinning, bending, and roll forming. Low Carbon plus a small quantity of Titanium and/or Niobium decrease austenite formation at excessive temperatures proscribing the power for the alloy to harden.

Stainless Steel Mechanical Properties

  • For maximum corrosion resistance to chemical environments, it is important that the 410S floor be freed from all warmth tint or oxide formed during annealing or hot working.
  • The low carbon content material and a small titanium addition minimizes austenite formation at excessive temperatures, thereby restricting the alloy’s ability to harden.
  • AISI Type 410S is a non-hardenable, low carbon modification of Type 410, offering average energy with moderate corrosion resistance.
  • The result is a soft, ductile condition when the material is quickly cooled from above the critical temperature.

Cold Rolled,Hot Rolled Stainless steel Plate and sheets

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

A small aluminum addition minimizes austenite formation at excessive temperatures, thereby proscribing the alloy’s capability to harden. This non-hardening characteristic also retards formation of hardening cracks when the steel is welded. The corrosion resistance of ESM’s 410S chrome steel is similar to kind 410.

Experiments to find out phase transformation temperatures are ongoing to find out the alpha to gamma transformation temperatures for this alloy in numerous cooling conditions. Results will decide how 410S can be best utilized in these industries. It can be treated by typical means to develop high power properties with good ductility. In reality, it is within the heat treated condition that T-410 develops its most corrosion resistance, notably when ground and polished.

And when heat handled to HRC 18/22, with double tempering, per NACE MR01-seventy five, resists corrosion in severe bitter fuel environments. Excellent for extremely stressed elements needing moderate heat and corrosion resistance with high power. It is annealed within the 1600 – 1650°F (871 – 899°C) vary after which air cooled to alleviate chilly working stresses. 410S shouldn’t be uncovered to temperatures of 2000°F (1093°C) or above due to embrittlement.

Alloy 410s

Continental Steel supplies Type 410S stainless-steel in a variety of different forms and sizes all of which meet a number of the hardest worldwide requirements together with, ASTM A 240 and ASME SA 240. Grade 410S stainless-steel can be machined within the annealed condition although higher outcomes are obtained in heat treated and chilly drawn situations. Equivalent materials to grade 410S stainless-steel are the next. The mechanical properties of grade 410S chrome steel are displayed in the following table. The following desk reveals the physical properties of grade 410S stainless-steel.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean

410s material
Tagged on: