st52 3 astm equivalent
1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis
din 1.0570 pdf
gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate
Owing to its chemical content material, ST37-2 doesn’t have corrosive resistance as A588 and can get rusty inside few days. Hence, sizzling-dip galvanized or pre-painting is often engaged to defending the metal from corrosion.
- Incorporated within the 12 months 2001, at Mumbai , We “Sterlite Metal Industries” are a famend name involved in manufacturing, importing, exporting and supplying a comprehensive assortment of seamless pipes.
- Q235A, Q235B, Q235C, Q235D, Q235E representation of the completely different levels, primarily influence of temperature difference.
- Our supplied seamless pipes are extraordinarily appreciated by our valuable clients for their sturdy construction, corrosion resistance, fine end, high mechanical power, temperature resistance and lots of more.
- Deoxidization method image for the F, b, z, TZ, representing steel, half-killed metal, metal and particular metal, designation, TZ and Z symbol may be omitted.
- Our intensive array of merchandise consists of Carbon Steel Seamless Pipes, Seamless Carbon Steel Pipes, Seamless Carbon Steel Pipes, Alloy Steel Seamless Pipes, Stainless Steel Seamless Pipes, and so on.
- The provided seamless pipes are manufactured utilizing the superior quality steel and complicated expertise as per the predefined business standards.
GradeYield strength ReH/(N/mm2)Tensile power Rm/(N/mm2)Elongation A/%(t≤16mm) min(3mm≤t≤16mm)(3mm≤t≤40mm) minASME SA Mpa IS Mpa410Mpa min23The chemical composition of IS 2062 metal is equal to that of ASME SA 36 metal. And the mechanical properties of IS 2062 metal virtually can match that of ASME SA 36 metal additionally.
I am acquiring quotations for metal mill elements that initially have been made in Germany. The blueprint for the part is in German and the part is to be made out of St52 steel. Please give the American equivalent for this materials. Material St52 steel equivalent to American ASTM AISI SAE, European normal EN, British normal BSI, France normal NF, ISO normal, Japanese standard JIS, Chinese GB normal and Indian IS normal. IS2062 is a product commonplace of Bureau of Indian Standards.
What is the hardness of OHNS material?
OHNS steel rod of 350 mm length and 75 mm diameter with a hardness of 45 HRc was selected as the work material for this investigation. This grade of steel has got a wide range of application in tool and die making industries. It is well known for its high tensile strength and toughness.
1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,
Second, the quantity of flex for a given dimension of steel that are not near yield is about the identical. If you might be getting near the yield stress, then the grade does matter. The grade you need to match, ST52-3, has barely larger yield and tensile specs than the grade you got here up with, A572GR50, according to one place I appeared.
ST37-2 is a kind of low carbon metal with carbon content of 0.20%, similar to S235JR or Q235. It’s not as robust as widespread ASTM A36, however additionally it is extensively utilized by on a regular basis makes use of and structural applications the place excessive energy is not so essential. We procure of boiler high quality plates, particular quality plates and high tensile plates from well-recognized manufacturers corresponding to Arcelormittal Steel, Azovstal Iron & Steel Works, Jindal Steel, Alchevsk Iron & Steel Works, Severstal, SAIL, Essar . Our constant interplay with fabricators across the nation has helped us to entry to surplus stocks that’s delivered to our valued clients. A 10 inch section of via-hardened S6 flexes under a butterfly’s weight.
Is 2062 a mild steel?
Mild Steel IS 2062 GR. A Plates is tough, ductile and malleable. Mild Steel IS 2062 GR. A Sheets has good tensile strength but poor corrosion resistance.
This plate also resistance to crevice and pitting corrosion, chloride stress cracking, erosion within the elevated temperature. This grade of plates has resistance to many acids like nitric, chloride, sulfide, in varied environments. S235JR carbon steel plate is the European commonplace of non-alloy structural steels, equivalent to GB Q235B metal plates, namely carbon structural steels with low carbon, used for welding, bolting, and more DIN 17100 ST 52-3 riveted structure. Our range is out there in several grades like SA 515, SA 516, SA 516 HIC NACE Tested, SA 537 CL 1,S355 J2 G3, SAILMA, M.S. Plates, DIN ST 52.3, SA 387 and lots of different grades . We have capability to offer all these plates in compliance to any requirements with stipulated time frames.
st52 3 steel equivalent astm
DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:
DIN |
ASTM |
EN |
JIS |
Chemical Composition |
C.E. |
||||||||||
C |
Si |
Mn |
Cr |
Mo |
Ni |
V |
W |
S |
P |
CU |
|||||
17100 St52-3N |
A572-50 |
10025-2:2004 S355J2+N |
G3106 SM490YB |
max 0.22 |
max 0.55 |
max 1.60 |
– |
– |
– |
– |
– |
max 0.035 |
max 0.035 |
– |
max 0.047 |
St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (product analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.065 |
0.065 |
– |
≤ 30 |
Fully Killded |
|
0.24 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.045 |
0.045 |
– |
≤ 30 |
||
0.24 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.22 |
0.60 |
1.70 |
0.035 |
0.035 |
– |
0.60 |
≤ 30 |
||
0.24 |
30 <d ≤100 |
St52-3 Steel Properties
Physical Properties
- Material St 52-3 Density: 7.85 g/cm3
- Melting point: 1420-1460 °C (2590-2660 °F)
DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate
Thickness (mm) |
Yield Strength Reh min (N / mm2) |
Tensile Strength Rm min (N / mm2) |
Elongation A5 min (%) |
Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm. |
3<thk<100 |
315-355 |
490-630 |
max 22 |
27 Joules at -20 C |
St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (ladle analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.040 |
0.040 |
– |
≤ 30 |
Fully Killded |
|
0.22 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.035 |
0.035 |
– |
≤ 30 |
||
0.22 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.20 |
0.55 |
1.60 |
0.025 |
0.025 |
– |
0.55 |
≤ 30 |
||
0.22 |
30 <d ≤100 |
DIN17100 ST52-3 EQUIVALENT STEEL GRADES
EN 10025 – 2 |
EN 10025+A1 |
?SN |
DIN 17100 |
||
EN10027-1 |
EN10027-2 |
EN10027-1 Grade |
EN10027-2 Grade |
|
|
S235JR2 |
1.0038 |
S235JRG2 |
1.0038 |
11375 |
RSt 37-2 |
S235J0 |
1.0114 |
S235J0 |
1.0114 |
11378 |
St 37-3U |
|
– |
S235J2GR3 |
1.0116 |
11378 |
St 37-3N |
S235J2 |
1.0117 |
S235J2G4 |
1.0117 |
– |
– |
S275JR |
1.0044 |
S275JR |
1.0044 |
11443 |
St 44-2 |
S275J0 |
1.0143 |
S275J0 |
1.0143 |
11445 |
St 44-3U |
|
– |
S275J2GR3 |
1.0144 |
11448 |
St 44-3N |
S275J2 |
1.0145 |
S275J2G4 |
1.0145 |
– |
– |
S355JR |
1.0045 |
S355JR |
1.0045 |
11523 |
St 52-3 |
S355J0 |
1.0553 |
S355J0 |
1.0553 |
11523 |
St 52-3U |
|
– |
S355J2G3 |
1.057 |
11503 |
St 52-3N |
S355J2 |
1.0577 |
S355J2G4 |
1.0577 |
– |
– |
Material St 52-3 Datasheet – 3
Yield strength (≥ N/mm2); Thickness (d) mm |
||||||
Steel (Steel number) |
d≤16 |
16< d ≤40 |
40< d ≤63 |
63< d ≤80 |
80< d ≤100 |
>100 |
St52-3 |
355 |
345 |
335 |
325 |
315 |
by agreement |
Tensile Strength
Material St 52-3 Datasheet – 4
Tensile strength (≥ N/mm2); Thickness (d) mm |
|||
Steel (Steel number) |
d<3 |
3 ≤ d ≤ 100 |
>100 |
St 52-3 |
515-680 |
490-630 |
by agreement |
Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
0.5 ≤d <1 |
1≤ d <1,5 |
1,5≤ d <2 |
2≤ d <2,5 |
2,5≤ d <3 |
|||
St52-3U |
14 |
15 |
16 |
17 |
18 |
|||
St52-3N |
12 |
13 |
14 |
15 |
16 |
|||
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
3 ≤d ≤40 |
40< d ≤63 |
63 < d ≤100 |
>100 |
||||
St52-3 |
22 |
21 |
20 |
by agreement |
||||
St52-3N |
20 |
19 |
18 |
These grades can be bolted,riveted and welded in a full vary of structural and fabricated gadgets together with bridges, field girders, cranes and other basic structural tasks. Conquest Steel & Alloys is among the most distinguished companies which are nicely often known as a manufacturer, suppliers, exporters, of IS 2062 E250C PLATES in the aggressive market. We are traders, wholesalers of all ferrous and non ferrous material and its product as well.
HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price