ASME SA516 Grade 60, also commonly written as SA516GR.60, SA-516 Grade 60, SA516 GR 60 and ASME SA-516/SA-516M Grade 60 [Grade 415], is the ASME family designation corresponding to ASTM A516/A516M Grade 60 [Grade 415]. Grade 415 is the SI designation in the same family, not a converted Grade 60 value. ASTM A516 Grade 60 is the corresponding ASTM designation, not merely another spelling of the ASME name. An ASTM-only certificate does not automatically satisfy a specified SA-516 order, and the reverse is also true. The official product page is ASME SA516 Grade 60.
This page states the public-reference chemical composition of ASME SA516 Grade 60 [Grade 415], already disclosed on ASME SA516 Grade 60 and ASTM A516 Grade 60. The table is a public reference, not a certified extract of every clause in the current ASME or ASTM edition. Acceptance is against the designation, edition and unit system named on the purchase order.
ASME SA516 Grade 60 Chemical Composition
| Element / condition | Heat analysis | Product analysis |
|---|---|---|
| Carbon, max, ½ in. [12.5 mm] and under | 0.21% | 0.21% |
| Carbon, max, over ½ in. to 2 in. [12.5 to 50 mm], incl. | 0.23% | 0.23% |
| Carbon, max, over 2 in. to 4 in. [50 to 100 mm], incl. | 0.25% | 0.25% |
| Carbon, max, over 4 to 8 in. [100 to 200 mm] and over 8 in. | 0.27% | 0.27% |
| Manganese, ½ in. [12.5 mm] and under | A purchaser choice: 0.60–0.90% or the higher 0.85–1.20% option | 0.55–0.98% or 0.79–1.30%, matching the heat option chosen |
| Manganese, over ½ in. [12.5 mm] | 0.85–1.20% | 0.79–1.30% |
| Silicon | 0.15–0.40% | 0.13–0.45% |
| Phosphorus / sulfur, max | 0.025 or 0.035 each, heat = product, with the official-page edition note. Use the ordered edition | |
The thin-plate manganese choice is Grade 60-specific. ASME SA516 Grade 65 uses 0.85–1.20% heat / 0.79–1.30% product in both thickness bands and must not be used as the Grade 60 table. For each 0.01 percentage point below the specified carbon maximum, manganese may increase 0.06 percentage point above the specified manganese maximum, up to 1.50% heat / 1.60% product.
Frequently Asked Questions (FAQ)
What is the chemical composition of ASME SA516 Grade 60?
Carbon maxima are 0.21 / 0.23 / 0.25 / 0.27% by the official thickness bands, the same for heat and product analysis. Manganese is thickness- and option-dependent, including a thin-plate choice. Silicon is 0.15–0.40% heat and 0.13–0.45% product. Phosphorus and sulfur are 0.025 or 0.035 in public references; use the ordered edition.
Is the manganese range of ASME SA516 Grade 60 the same as Grade 65?
Not for thin plate. ASME SA516 Grade 60 has a purchaser choice of manganese ranges at ½ in. and under. Grade 65 does not have that thin-plate choice. Use the official table for the grade being ordered.
Does a product analysis of ASME SA516 Grade 60 use the heat-analysis manganese limits?
No. Product-analysis manganese and silicon use the wider ranges in the table. Carbon, phosphorus and sulfur maxima are the same on both bases in the public-reference table used here.
Where is the official ASME SA516 Grade 60 chemistry table on this site?
On ASME SA516 Grade 60 and ASTM A516 Grade 60.
For plate to ASTM A516/A516M Grade 60 [Grade 415] or ASME SA-516 Grade 60, please contact Gangsteel with the designation, edition, unit system, delivery condition, dimensions, quantity and any supplementary requirements. Learn more about our pressure-vessel and boiler steel plate at Gangsteel.
