
Gangsteel supplies ASTM A517 Grade F steel plate (A517 GR.F, A517 Gr.F) as quenched and tempered alloy steel plate to ASTM A517/A517M for fusion-welded boilers and other pressure vessels. Grade F is a nickel-chromium-molybdenum-copper-vanadium-boron grade, limited to a maximum thickness of 2.50 in. [65 mm] (clause 1.3), with a minimum yield strength of 100 ksi [690 MPa] in plate 2.50 in. [65 mm] and under. The plates shall be heated to not less than 1650 °F [900 °C], quenched in water or oil, and tempered at not less than 1150 °F [620 °C]. This is not the structural specification ASTM A514/A514M. The corresponding ASME plate is ASME SA517 Grade F. Existing ASTM A517 grade pages on this site include ASTM A517 Grade A, ASTM A517 Grade B, ASTM A517 Grade E, ASTM A517 Grade H, ASTM A517 Grade P, ASTM A517 Grade Q, ASTM A517 Grade S. Within the pressure-vessel and boiler steel plate range, Gangsteel coordinates mill production, plate processing and export supply around the contractual edition and the requirements of each order.
This page is a full-site official-style product-body remediation under the existing parent category pressure-vessel and boiler steel plate. It is not part of the named official-product-standards hubs, and no child ASTM A517 taxonomy is created. ASTM A517/A517M covers quenched and tempered alloy steel plates intended primarily for fusion-welded boilers and other pressure vessels, under the general requirements of ASTM A20/A20M. It is not the structural specification ASTM A514/A514M, and A514 tensile and chemistry figures are not presented as A517 requirements. The current published ASTM edition used for scope is A517/A517M-17 (reapproved 2023). Chemistry (Table 1, including product-analysis columns), grade maximum thickness (clause 1.3), tensile requirements (Table 2), heat treatment (clause 5) and transverse Charpy V-notch lateral-expansion requirements (clause 7.2) follow official ASTM A517/A517M-10(2015) and ASME BPVC.II.A-2023 SA-517/SA-517M, which is identical with ASTM A517/A517M-17 except for the addition of Footnote A to boron in Table 1. Those two official texts agree on the tabulated bands used here, including P 0.025 % max and S 0.025 % max for every grade. ASTM A517/A517M-06 stated P and S maxima of 0.035 %; that earlier pair is not used. The eight official grades are A, B, E, F, H, P, Q and S; ASTM A517 Grade P and ASTM A517 Grade Q are existing already-revised ASTM A517 Grade P and Grade Q pages, and the corresponding ASME SA517 Steel Plates pages were published earlier, and are linked, not redrafted. No grade is invented. The contractual edition named on the purchase order, the mill certificate and ASTM A20/A20M govern.
Grade Designation
- Standard: ASTM A517/A517M-17 (reapproved 2023); tabulated chemistry, tensile, thickness and impact from official A517/A517M-10(2015) and ASME BPVC.II.A-2023 SA-517 (identical with A517-17 except boron Footnote A).
- Steel name: ASTM A517 Grade F (also written A517 GR.F, A517 Gr.F, A517Gr.F).
- Intended use: fusion-welded boilers and other pressure vessels, under ASTM A20/A20M.
- Usual delivery: quenched and tempered (heating to not less than 1650 °F [900 °C], water or oil quench, tempering at not less than 1150 °F [620 °C]).
- Clause 1.3 maximum thickness for Grade F: 2.50 in. [65 mm].
- Impact: transverse Charpy V-notch lateral expansion not less than 0.015 in. [0.38 mm]; test temperature agreed, not higher than 32 °F [0 °C] (clause 7.2).
Key Advantages of ASTM A517 Grade F Steel Plate
- Nickel-chromium-molybdenum-copper-vanadium-boron chemistry, with a specified maximum thickness of 2.50 in. [65 mm].
- 100 ksi [690 MPa] minimum yield and 115–135 ksi [795–930 MPa] tensile strength in plate 2.50 in. [65 mm] and under (A517 Table 2).
- Mandatory transverse Charpy V-notch lateral expansion of 0.015 in. [0.38 mm], at an agreed temperature not higher than 32 °F [0 °C].
- Quenched and tempered delivery as specified, suitable for welding when a procedure appropriate to the grade and service is used.
Chemical Composition of ASTM A517 Grade F Steel Plate
| Element | Heat analysis, % | Product analysis, % |
|---|---|---|
| C | 0.10–0.20 | 0.08–0.22 |
| Mn | 0.60–1.00 | 0.55–1.10 |
| P | 0.025 max | 0.025 max |
| S | 0.025 max | 0.025 max |
| Si | 0.15–0.35 | 0.13–0.37 |
| Ni | 0.70–1.00 | 0.67–1.03 |
| Cr | 0.40–0.65 | 0.36–0.69 |
| Mo | 0.40–0.60 | 0.36–0.64 |
| B | 0.0005–0.006 | 0.0005–0.006 |
| V | 0.03–0.08 | 0.02–0.09 |
| Ti | 0.10 max | 0.11 max |
| Cu | 0.15–0.50 | 0.12–0.53 |
Official ASTM A517/A517M Table 1 (A517/A517M-10(2015) and SA-517 2023), including the product-analysis column. P 0.025 % max and S 0.025 % max apply to all eight grades. The 2006 edition stated 0.035 % for P and S; those earlier maxima are not used. Where Table 1 has no requirement for an element on this grade, the element is omitted. Most limits are ranges, not single maxima. The steel shall conform to Table 1 unless modified in accordance with Supplementary Requirement S17 of A20/A20M for grades other than Grade A.
Mechanical Properties of ASTM A517 Grade F Steel Plate
| Thickness | Tensile strength, ksi [MPa] | Yield strength min, ksi [MPa] | Elongation in 2 in. [50 mm], min, %A | Reduction of area, min, % |
|---|---|---|---|---|
| 2.50 in. [65 mm] and under | 115–135 [795–930] | 100 [690] | 16 | 35 (rectangular) / 45 (round) |
Official ASTM A517/A517M Table 2. All eight grades share this tensile table. Grade F is limited to 2.50 in. [65 mm], so the official “Over 2.50 to 6 in.” Table 2 column does not apply to this grade and is not shown as a Grade F requirement. Elongation adjustment follows ASTM A20/A20M (Table 2 footnote A). Yield strength may be determined by the 0.2 % offset method or by the total extension under load of 0.5 %. This is not the ASTM A514 Table 2 (which starts at 110–130 ksi tensile).
Impact properties
Transverse Charpy V-notch impact test specimens shall have a lateral expansion opposite the notch of not less than 0.015 in. [0.38 mm] (clause 7.2.1). The test temperature shall be agreed between the manufacturer and the purchaser, but shall not be higher than 32 °F [0 °C] (clause 7.2.2). A joule energy minimum is not tabulated in clause 7.2 and is not invented here.
Delivery Condition, Tests and Heat Treatment
ASTM A517 Grade F plates shall be heated to not less than 1650 °F [900 °C], quenched in water or oil and tempered at not less than 1150 °F [620 °C]. Tension tests shall conform to Table 2. Transverse Charpy V-notch lateral expansion shall meet clause 7.2. General requirements follow ASTM A20/A20M. Supplementary requirements (including ultrasonic examination and vacuum carbon-deoxidized steel S17 for grades other than Grade A) are available when specified. The purchaser specifies the contractual edition, grade, thickness, dimensions, impact test temperature and any supplementary requirements.
Available Dimensions of ASTM A517 Grade F Steel Plate
The official maximum thickness for ASTM A517 Grade F is 2.50 in. [65 mm]. Width, length and any processing (cutting, bevelling) are as specified on the order and as the mill can produce. Gangsteel does not publish a standing stock list on this page. The purchaser should state the required thickness, dimensions and quantity at enquiry.
Main Applications of ASTM A517 Grade F Steel Plate
ASTM A517 Grade F is specified for fusion-welded boilers and other pressure vessels under ASTM A517/A517M and A20/A20M, where the purchase order names this grade, the contractual edition and the quenched and tempered delivery. It is not, by itself, a substitute for ASTM A514 structural plate. Suitability for a given design code, thickness and welding procedure is a matter for the purchaser’s specification and the mill certificate.
Equivalent Grades of ASTM A517 Grade F Steel Plate
The following existing Gangsteel product pages are corresponding grades that are often discussed alongside ASTM A517 Grade F. Correspondence is not automatic substitution. The purchase order must name the standard, the grade, the edition and the delivery condition.
| Standard | Grade | Qualification |
|---|---|---|
| ASTM A517/A517M | Grade A, Grade B, Grade E, Grade H, Grade P, Grade Q, Grade S | The other official A517 grades on this site. All eight share Table 2 and clause 7.2; each has its own Table 1 chemistry and clause 1.3 thickness. Not automatic substitutes for Grade F. |
| ASME SA-517 | ASME SA517 Grade F | ASME BPVC Section II SA-517 is identical with ASTM A517/A517M-17 except for the addition of Footnote A to boron in Table 1. Still not an automatic substitute unless the purchase order names the ASME specification. |
| ASTM A514/A514M | ASTM A514 Grade F | Structural quenched and tempered plate with a related grade letter. Table 2 tensile starts at 110–130 ksi, P and S maxima and some ranges differ, and A514 has no basic Charpy lateral-expansion requirement. Not an automatic substitute. |
| EN 10028-6 | P690QL1, P690QL2 | European quenched and tempered pressure-vessel steels of the 690 MPa class. Chemistry, thickness bands and impact rules (Part 6 QL2 is −60 °C) differ. Not automatic substitutes. |
| EN 10025-6 | S690QL, S690QL1 | European quenched and tempered structural steels in a comparable yield class, not a pressure-vessel standard. Not automatic substitutes. |
Related Products
- ASTM A517 Grade A — same specification, different Table 1 grade.
- ASTM A517 Grade B — same specification, different Table 1 grade.
- ASTM A517 Grade E — same specification, different Table 1 grade.
- ASTM A517 Grade H — same specification, different Table 1 grade.
- ASTM A517 Grade P (already revised) — same specification, different Table 1 grade.
- ASTM A517 Grade Q (already revised) — same specification, different Table 1 grade.
- ASTM A517 Grade S — same specification, different Table 1 grade.
- ASME SA517 Grade F — ASME counterpart, already published, and the ASME SA517 Steel Plates range.
- ASTM A514 Grade F — corresponding structural QT plate, not an automatic substitute.
- EN 10028-6 P690QL1 — Part 6 QT pressure-vessel steel of the 690 MPa class.
- EN 10025-6 S690QL — structural QT steel, different standard.
- Pressure-vessel and boiler steel plate — parent category range.
FAQ about ASTM A517 Grade F Steel Plate
What is ASTM A517 Grade F steel plate?
ASTM A517 Grade F (A517 GR.F, A517 Gr.F) is a quenched and tempered alloy steel plate to ASTM A517/A517M for fusion-welded boilers and other pressure vessels. It is a nickel-chromium-molybdenum-copper-vanadium-boron grade. Aliases used in enquiries include A517 Grade F, A517Gr.F, A517 Gr.F, A517 GR.F, ASTM A517/A517M Grade F.
What is the usual delivery condition of ASTM A517 Grade F?
ASTM A517 Grade F is supplied quenched and tempered: heated to not less than 1650 °F [900 °C], quenched in water or oil, and tempered at not less than 1150 °F [620 °C]. This is not the structural specification ASTM A514/A514M.
What is the chemical composition of ASTM A517 Grade F?
Official A517 Table 1 heat- and product-analysis limits for ASTM A517 Grade F are given in the chemical-composition table on this page, including P 0.025 % max and S 0.025 % max. The 2006 edition stated 0.035 % for P and S; those earlier maxima are not used.
What are the yield, tensile and elongation values of ASTM A517 Grade F?
Official A517 Table 2 gives, for 2.50 in. [65 mm] and under, 115–135 ksi [795–930 MPa] tensile, 100 ksi [690 MPa] minimum yield, 16 % elongation, and reduction of area 35 % (rectangular) or 45 % (round). Grade F is limited to 2.50 in. [65 mm], so the over-2.50 in. Table 2 column does not apply. These figures are not the ASTM A514 Table 2 values.
What is the impact requirement for ASTM A517 Grade F?
Transverse Charpy V-notch specimens for ASTM A517 Grade F shall have a lateral expansion opposite the notch of not less than 0.015 in. [0.38 mm]. The test temperature is agreed, but shall not be higher than 32 °F [0 °C]. A joule minimum is not tabulated in clause 7.2 and is not invented here.
What is the maximum thickness of ASTM A517 Grade F?
ASTM A517/A517M clause 1.3 limits ASTM A517 Grade F to 2.50 in. [65 mm]. This page does not publish a standing stock list.
Is ASTM A517 Grade F the same as ASME SA517 Grade F?
ASME SA517 Grade F is the ASME Section II counterpart. SA-517 2023 is identical with ASTM A517/A517M-17 except for a boron footnote. It is still not an automatic substitute unless the purchase order names the ASME specification.
Is ASTM A517 Grade F the same as ASTM A514 Grade F?
No. ASTM A514 Grade F is a structural-quality plate. Tensile Table 2, P and S maxima and some ranges differ, and A514 has no basic Charpy lateral-expansion requirement. Not an automatic substitute for ASTM A517 Grade F.
How do I enquire for ASTM A517 Grade F steel plate?
Please contact Gangsteel with the grade A517 GR.F (or ASTM A517 Grade F), the contractual edition of ASTM A517/A517M (or ASME SA-517 if that is the named code), thickness and dimensions, the agreed impact test temperature, and any supplementary requirements. Visit Gangsteel or contact Gangsteel to place the enquiry.
For production, processing and export enquiries for ASTM A517 Grade F steel plate, please contact Gangsteel. Visit Gangsteel for the full plate-supply range.
