ASTM A240 316h stainless steel properties

Gangsteel produce and machine ASTM A240 316h, A240 TP316H, A240 Type 316H UNS S31609 stainless steel plate, our production range, thickness 8mm to 160mm, width max 2600mm. The max weight to 8tons.

It is the preferred metal to be used in marine environments because of its greater resistance to pitting corrosion than other grades of steel. The proven fact that it’s negligibly conscious of magnetic fields implies that it may be used in purposes where a non-magnetic steel is required. In addition to molybdenum, 316 also accommodates a number of different parts in various concentrations. Like other grades of stainless-steel, marine grade stainless steel is a comparatively poor conductor of each warmth and of electrical energy when in comparison with metals and other conductive materials. The SS 316L Plate is used in totally different industries with the presence of various properties.

A240 316H has poor welding performance, poor resistance to intergranular corrosion, high toughness and plasticity, but low strength, and it is impossible to strengthen it through phase transformation. It can only be strengthened by cold working by adding Mo element to make it corrosion resistant.
The performance and high temperature strength have been greatly improved, the high temperature resistance can reach 1200-1300 degrees, and it can be used under harsh conditions.
Widely used in heavy industry, light industry, daily necessities industry, and hundreds of building decoration industries

A240 316h,a240 Tp 316h,ss 316h Plate,tp316h

316 & 316L steel plate and Plates have common properties and are sometimes stocked with Dual Certification, where it’s decided that each have properties and composition which comply with both metal varieties. is a higher carbon variation of 316 making the metal more suitable to be used in functions where excessive temperatures are available. The expanded carbon content delivers a greater tensile and yield power. The Austenitic structure of the fabric additionally provides this grade excellent toughness, even right down to cryogenic temperatures. The offered metal plate is designed with utmost precision in conformity with the international high quality requirements. ASTM A240 Stainless Steel, also referred to as inox steel, is a metal alloy with a minimum of 10.5 or 11% chromium content material by mass. Greenline Pipe and Fitting is the outstanding producer of the wide ranges of the SS 316 Sheet and plate.

We have min 600Tons inventory measurement for every dimension ASTM A H chrome steel plate. We also have slicing factory which might cut stainless part based on our buyer requirement. While 316 isn’t fully rust-proof, the alloy is more corrosion-resistant than different common stainless steels.

A240 316H

Element

316H

316

316L

Chromium

16.0 min.-18.0 max.

16.0 min.-18.0 max.

16.0 min.-18.0 max.

Nickel

10.0 min.-14.0 max.

10.0 min.-14.0 max.

10.0 min.-14.0 max.

Molybdenum

2.00 min.-3.00 max.

2.00 min.-3.00 max.

2.00 min.-3.00 max.

Carbon

0.04 – 0.10

0.08

0.030

Manganese

2.00

2.00

2.00

Phosphorus

0.045

0.045

0.045

Sulfur

0.030

0.030

0.030

Silicon

0.75

0.75

0.75

Nitrogen

0.10

0.10

  1. What is different in chemical A240 316H a240 316 and 316L?

 

  1. About stainless steel Market and later 2020-11-23

 

Today’s 201 cold and hot mornings are mostly flat, the hot-rolled Castle Peak agency reported the January 2021 futures price, and the five-foot hot-rolled hot-rolled five-foot hot-rolled market has mostly fallen with the influx of major steel mills, and the cold-rolled area has some
The price of some specifications is low, and some specifications are temporarily waiting to see. However, seeing various specifications update, especially the fluctuation of 304, the market is also in various helplessness. 201 is like dodder flower, so it is difficult to get out of its own market.
, But the market is not all bearish, there are also closings in the afternoon.

In the morning, Tsingshan December futures: J1: 7500, J2: 7150; morning market spot price: J1 base price Hongwang, Beibu Gulf, Chengde, etc. are at 7450-7500 yuan/ton basis, Lianzhong is at 7300-7400 basis
, Excluding tax is at 6830-6880 yuan/ton base; while J2 and J5 are at 7050-7150 yuan/ton base, excluding tax at 6500-6580 yuan/ton base.

Hot rolling: Qingshan agent, January 2021 futures: Dingxin J1: 7150, J2: 6750, J3: 6950, J4: 7550; Beibu Gulf New Material offers J1: 7100-7150, J5: 6700-6750, J3:
6800-6900, J4: 7450-7500.
CICC J5: 6400-6500, J3: 6550-6650.
In the afternoon, the market quotation did not change much. Some of the market’s production areas indicated that it was full in December, while the spot transactions were more profitable, especially the price of five-foot hot-rolled rolled products.

In summary, it is important for the 201 cold and heat to stabilize.

 

  1. What is ASTM A240 316H Stainless steel plate?
    Corresponding to Chinese number plate 07Cr17Ni12Mo2

Name: Austenitic stainless steel
Standards: AISI, ASTM
Model: 316H
UNS Number: S31609
316H chemical composition
Carbon C: 0.04~0.10
Manganese Mn: ≤2.00
Silicon Si: ≤0.75
Chromium Cr: 16.0~18.0
Nickel Ni②: 10.0~14.0
Phosphorus P: ≤0.045
Sulfur S: ≤0.03
Mo: 2.0~3.0

  1. Othe Stainless steel plate, what you can refer to.
    316Ti – 600°C-900°C temperature range requires better heat resistance.

316N – Higher strength than standard 316 stainless steel.
317L – Compared with 316L, it has better resistance to chloride corrosion and similar resistance to stress corrosion cracking.
444 – Ferrite grade, low cost for thin coils.
904L-Chloride corrosion resistance under high temperature is much higher, good formability.
2205–Much higher resistance to chloride corrosion at high temperature and higher strength

We are considered as one of the best supplier of the great quality of the SS 316 plate. The sheet and plate can be found in several specs as per the shopper’s expectations and utilization within the functions. Alloy 316H also has good resistance to pitting in phosphoric and acetic acids.

What is 316h stainless steel?

Type 316H is a higher carbon variant of 316 making the steel more suitable for use in applications where elevated temperatures are present. Stabilised Grade 316Ti offers similar qualities. The increased carbon content delivers a greater tensile and yield strength.

Corrosion Resistance

The alloy has higher energy at elevated temperatures and is used for structural and stress vessel purposes at temperatures above 932°F (500°C). The larger carbon content material of 316H additionally delivers higher tensile and yield power than 316/316L and its austenitic construction supplies glorious toughness all the way down to cryogenic temperatures. Is it attainable to make a ss vessel which working temp 300-diploma celsius ? It is common for 316 and 316L to be stocked in “Dual Certified” type – primarily in plate and pipe. These objects have chemical and mechanical properties complying with both 316 and 316L specifications.

ASTM A240 316h stainless steel round bar

ASTM A240 316h stainless steel pipe

Austenitic stainless steels are inherently tough, sustaining the ductile fracture mode and excessive absorbed vitality in influence tests to cryogenic temperatures (-200°C). Austral Wright Metals will be pleased to supply recommendation for specific applications. The low carbon model, 316L, could also be required for full corrosion resistance when sections thicker than about 5 mm are welded. The model with assured excessive carbon, 316H, could also be required for elevated temperature service, similar to strain vessels. Both Alloys 316 and 317L are susceptible to precipitation of chromium carbides in grain boundaries when uncovered to temperatures in the 800 to 1500°F (427 to 816°C) vary.

  • They are routinely joined by all fusion and resistance welding processes.
  • Cooling should be sufficiently rapid through the 1500 to 800°F (816 to 427°C) vary to keep away from reprecipitation of chromium carbides and supply optimum corrosion resistance.
  • Two essential concerns for weld joints in these alloys are avoidance of solidification cracking, and preservation of corrosion resistance of the weld and heat-affected zones.
  • The austenitic stainless steels are provided in the mill annealed condition ready for use.

ASTM A240 Type 316H
ASTM A240 316H laster jet cutting parts
ASTM A240 316H Heat treatment
ASTM A240 316H hardness
ASTM A240 316H CNC cutting parts
ASTM A240 316H water jet cutting parts
ASTM A240 316H Laser cutting parts
ASTM A240 316H oxyfuel flame cutting parts
ASTM A240 316H plasma cutting plates
A240 TP316H Stainless steel light round bar
A240 TP316H Stainless steel hexagonal bar
A240 TP316H Stainless steel round bar
A240 TP316H Stainless steel flat steel
A240 TP316H Stainless steel square steel
A240 TP316H Stainless steel channel
A240 TP316H Stainless steel wire
A240 TP316H Stainless steel angle
A240 TP316H Stainless steel black steel rod
A240 TP316H Stainless steel coil
A240 TP316H Stainless steel plate
A240 TP316H Stainless steel strip
A240 TP316H BA surface
A240 TP316H N0.1 surface
A240 TP316H 2B surface

Such “sensitized” steels are topic to intergranular corrosion when uncovered to aggressive environments. Where brief intervals of publicity are encountered, nonetheless, such as in welding, Alloy 317L with its greater chromium and molybdenum content material, is more resistant to intergranular attack than Alloy 316 for purposes where gentle gauge material is to be welded. Heavier cross sections over 7/16 inch (11.1 mm) often require annealing even when Alloy 317L is used. Grade 316 would require post-weld annealing to advertise maximum corrosion resistance, though this is not essential if Type 316L is used.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone:

, ,

Grade 316L, the low carbon version of 316 and is immune from sensitisation . Grade 316H, with its larger carbon content has utility at elevated temperatures, as does stabilised grade 316Ti. Amardeep metal heart is one of the leading manufacturer, exporter & suppliers of high quality ASTM A312 TP 316H Stainless Steel Pipes & tubes .

The Effect of Cold Expansion of Q235B Large Diameter Straight Seam Steel Pipe – DC Velocity

The Effect of Cold Expansion of Q235B Large Diameter Straight Seam Steel Pipe.

Posted: Mon, 23 Nov 2020 07:09:18 GMT [source]

Gangsteel had A240 316H stainless steel plate stock about 360tons thickness from 3mm to 150mm. If you have requirement for 316H, please feel free to contact us.

ASTM A240 316h vs 316