Aerospace Distributor Supplier

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

ams stainless steel

Content

Type 310 is a non-warmth treatable alloy pro­duced by the electrical-furnace course of, which concurs with the exacting standards of the aircraft trade. ApplicationsThis alloy is excellently fitted to purposes requiring high power, good corrosion resist­ance and good resistance to seizing and galling. It possesses excellent corrosion resistance towards all atmospheric conditions. Finish and warmth treatment have an effect on the level of corrosion resistance beneficially.

Surface scaling and distortion in heat therapy is eradicated by its capability to be handled at very low temperatures. In the annealed situation, it has wonderful ductility and machine­capability. It retains outstanding mechanical and physical properties at temperatures up to 800° F.

Type 410

Manufactured by the electrical-furnace process, this is a non-warmth treatable alloy, the hardness and tensile power of which can be increased significantly by cold working. It has good corrosion resistance, and is non- magnetic within the annealed state. It concurs with the stringent requirements of the plane industry. It has barely much less corrosion resistance to atmospheric situations than Type 302 or Type 304 in the annealed situation. At extremely high temperatures, its creep strength and resistance to brittling far surpasses all other austenitic grades.

  • High ductility, excellent drawing, forming, and spinning properties.
  • Essentially non-magnetic, turns into barely magnetic when cold worked.
  • Nitrogen provides higher tensile and tensile yield power with out diminishing ductility, corrosion resistance, or nonmagnetic properties.
  • Low carbon content material means less carbide precipitation in the warmth-affected zone throughout welding and a decrease susceptibility to intergranular corrosion.

Length: 2000mm, 2438mm,2500mm,3000mm,6000mm,or required

Stock Thickness: 0.1-200.0mm
Production thickness: 0.5.0-200mm
Width: 600-3900mm
Length: 1000-12000mm
Grade:
200 series: 201,202
300 series: 301,304,304L,304H,309,309S,310S,316L,316Ti,321,321H,330
400 series: 409,409l,410,420J1,420J2,430,436,439,440A/B/C
Duplex: 329,2205,2507,904L,2304
Surface: No.1,1D,2D,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K

ApplicationsBecause of its excessive strength and versatility in warmth remedy applicability, and because of its good mechanical and machining properties, Type 410 finds utilization in a wide range of applica­tions. It is used for low-cost cutlery, food industry machine parts, pump shafts, valve parts, compressor shrouds, and abrasive applications.

This alloy is produced by the vacuum arc re-melt methodology, which enhances ductility and toughness. 15-5 PH has wonderful physical and mechanical properties and may be deep drawn, forged, welded and shaped. ApplicationsType 347 is principally used the place corrosion resistance and sustained operations at temperatures between 800° F. It can be a superior grade to be used on heavy welded objects, which cannot be re-annealed. Its general atmospheric corrosion resistance is nice, being just like that of Type 302.

Nitrogen supplies greater tensile and tensile yield strength without diminishing ductility, corrosion resistance, or nonmagnetic properties. High ductility, glorious drawing, forming, and spinning properties. Essentially non-magnetic, turns into barely magnetic when chilly labored. Low carbon content material means less carbide precipitation in the warmth-affected zone during welding and a lower susceptibility to intergranular corrosion. Types 303S and 303Se are both free-machining modifications of Type 302.

Maximum corrosion resistance may be obtained by fully anneal­ing this alloy. If the application requires welding, Type 316L must be used as it’s highly proof against carbide precipitation and intergranular corrosion. This grade is an austenitic stainless-steel manufactured by-the electrical furnace process. Its chromium and nickel content material are lower than most different grades, offering the advantage of a high work-hardening fee which mixes cold-worked excessive energy with good ductility.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean

ams stainless steel
Tagged on: