en 10025-6 s890ql 1/2 steel plate 4×8 price manufacturer

Gangsteel Sell EN 10025-6 S890QL Extra High Strength Steel Plate and export EN10025-6 S890QL Quenched and Tempered Structural Steel IN China.What is EN 10025-6 Grade? S890QL Grade Designation , S = Structural Steel, 890 = minimum yield strength (MPa), Q = Quenching & Tempering and L = Low notch toughness testing temperatures

es

s890ql DNV BV GL LR steel plate,s890ql steel equivalent,s890ql steel plate,s890ql mechanical properties,s890ql properties,s890ql datenblatt,s890ql steel price,s890ql schweißen,en 10025-6 s890ql,welding s890ql,s890ql steel cutting parts,s890ql chemical and property,acier s890ql,s890ql werkstoff,s890ql hardness,s890ql equivalent,s890ql werkstoff datenblatt,s890ql datasheet,acciaio s890ql,s890ql material,blacha s890ql,s890ql steel stocklist,s890ql equivalent,s890ql equivalent steel,s890ql steel equivalent,s890ql steel platesteel plate,en 10025-6 s890ql steel plates manufacturer,en 10025-6 s890ql weight of steel plate manufacturer,en 10025-6 s890ql steel plate weight manufacturer,en 10025-6 s890ql steel plate prices manufacturer

CUSTOMER SATISFACTION BUILT WITH STEELThe atmospheric corrosion resistance of this metal in most environments is substantially higher than that of carbon steels with or without copper addition.

• It presents minimal yield power of 50 ksi and a minimal tensile strength of Mpa; it is a low carbon structural steel plate with marvellous usability.Steel Angles – Hillside, New Jersey – Arco Steel CompanyASTM A588 Standard specification for prime-power low-alloy structural metal.
• This specification covers shapes for welded, riveted, or bolted development however meant primarily to be used in welded bridges and buildings where savings in weight or added durability is necessary.

S690QL EN STEEL PLATES , high yield quenched and tempered steel plateS690QL A high energy structural metal supplied in quenched and tempered condition.

• The A572 is extensively utilized in structural functions, together with bridges, buildings and development tools and more.S355 Structural Steel Plate, S355JR Structural Steel Plate , High Strength Low Alloy Structural Steel SheetsS355 High Strength Structural Steel Plates are high power, low alloy steel plates falling under the EN European normal.

It can be utilized in many load bearing functions for its excessive yield. Abstract This specification covers high-yield, quenched, and tempered alloy steel plates for use in welded bridges and different buildings. Plates shall be subjected to warmth treatment to conform to the tensile and hardness necessities for thickness, tensile power, yield energy, elongation, reduction of area, and Brinell hardness. EN metal grade specification is a excessive yield power structural steels within the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.Dealer HomeWelcome to the AR500Armor s500ql steel plate supplier Dealer portal. An authorized Dealer account is required to view this website.

en 10025-6 s890ql steel plate above window manufacturer

It is a steel that combines excessive yield and tensile strengths with good notch toughness and wonderful weldability and has a minimum yield energy of 690 MPa. scope This specification covers the general requirements for metal sheet in coils and minimize lengths.

en 10025-6 s890ql c.k.b. plate steel co. ltd manufacturer

This grade is used within the manufacture of storage tanks and Stainless Steel, Carbon Steel, Alloy Steel, High Nickel sa283 grade c steel plate low cost manufactureA285 / A283 Grade C Sheets & Plates. A285 / A283 Grade C Sheets & Plates, ASME SA285/SA283 Gr.C Pressure Vessel Steel Plate Exporters, Suppliers and Stockists in India. We merchandise these ASTM A 285 / A283 Grade C merchandise which might be efficient at low stress conditions, but may also be utilized in quite a lot of conditions.

This specification covers rolled shapes for use in building framing or bridges, or for , High Strength Low Alloy Structural Steel SheetsSheet Liebovich Steel & Aluminum CompanyLow-carbon steel containing approximately 0.forty% manganese that has glorious weldability and formability. 1011 Hot-rolled carbon metal alloy sheet that displays high power and high formability. Abrasion resistant.Plate – CUSTOMER SATISFACTION BUILT WITH STEELASTM A36 Standard specification for carbon structural steel. This specification covers shapes of structural quality for use in riveted, bolted, or welded building of bridges and buildings, and for general structural functions. ASTM A572 Standard specification for high-energy low-alloy structural metal.

Delivery conditions of s890q, s890ql, and s890ql1 steel plates. Quenching + tempering (q). Note: direct quenching followed by tempering after hot rolling is equivalent to conventional quenching and tempering.6. Impact properties of s890q, s890ql, and s890ql1 steel plates and S890q at – 20 ��, s890ql at – 50 ��, s890ql at – 60 ��

S890QL is extra high strength steel to EN10025-6:2004, and the steel number is 1.8983. S890QL has a minimum yield strength of 890Mpa in quenched and tempered conditions; with its low temperature of -40 ºC, this steel grade performs good durability in extreme working environments.

en 10025-6 s890ql steel plates Mechanical Properties

Plate Thickness MM	Yield Strength ReH(Mpa)	Tensile Strength Rm(Mpa)	Elongation A5% Minimum
3 to 50	890	940~1100	11
> 50 to 100	830	880~1100	11

Technical conditions for s890q, s890ql and s890ql1 steel plates
1. S890 steel plate is a quenched and tempered high strength steel plate with series grades of s890q, s890ql and s890ql1. It is a low carbon non alloy structural steel plate with European standard en10025-6. It can be produced by Wuyang Iron and steel company in China. In order to ensure its performance, the carbon content of this kind of steel plate is less than 0.2%.
2. S890q, s890ql and s890ql1 steel plates, where s means structural steel, Q means impact temperature of steel plate is – 20 ° C,Then QL means the impact temperature of the steel plate is – 50 ° C. guess what ql1 stands for, ql1 means the impact temperature of the steel plate is – 60 ° C, 890 means the minimum yield strength value specified by the thickness of (50 mm),
Chemical Composition – EN 10025-6 S890QL. Content % (ladle analysis), maximum.

C	SI	MN	P	S	B	CR	CU	MO
0.20	0.80	1.70	0.020	0.010	0.005	1.50	0.50	0.70
N	NB*	NI	TI*	V*	ZR*
0.015	0.06	2.0	0.05	0.12	0.15

EN 10025-6 s890ql steel plates V Notch Impact Test

Position of Samples	0 ºC	-20 ºC	-40 ºC
Longitudinal	50 Joules	40 Joules	30 Joules
Transverse	35 Joules	30 Joules	27 Joules

en 10025-6 s890ql steel plates Quenched and Tempered Structural Steel

Minimum recommended inside bending radius
Axis of bend in transverse direction 3.0t	Axis of bend in longitudinal direction 4.0t

3. The steel specified in this standard can be used for the production of hot rolled plate with minimum nominal thickness of 3 mm and maximum nominal thickness of less than 150 mm for S460, S500, S550, S620, s690, S890 and s960 series steel plates. The minimum yield strength specified for Quenched and tempered steel is 460mpa1) to 960 mpa1)
4. Production size; Thickness; 6-300mm, width max 3800mm length.
en 10025-6 s890ql Chemical Composition

C	Si	Mn	P	S	B	Cr	Cu	Mo
0.20	0.80	1.70	0.020	0.010	0.005	1.50	0.50	0.70
N	Nb*	Ni	Ti*	V*	Zr*
0.015	0.06	2.0	0.05	0.12	0.15

PLATE THICKNESS MM	YIELD STRENGTH REH (MPA)	TENSILE STRENGTH RM (MPA)	ELONGATION A5 % MINIMUM	IMPACT STRENGTH J, MINIMUM
3 to50	890	940 – 1100	11	30 @ -40º C
50to 100	830	880 – 1100	11	30 @ -40º C

en 10025-6 s890ql steel plates manufacturer and property Chemical Properties Of s890ql steel plate:

C

Si

Mn

Ni

P

S

Cr

Mo

V

N

Nb

Ti

Cu

Zr

B

CEV

max   0.2

max   0.8

max   1.7

max   2

max   0.025

max   0.015

max   1.5

max   0.7

max   0.12

max   0.015

max   0.06

max   0.05

max   0.5

max   0.15

max   0.005

max   0.82

Mechanical Properties Of s890ql steel plate:

Designation		Mechanical Properties (ambient temperature)
Steel Name	Steel Number	Min. Yield Strength Reh MPa			Tensile Strength Rm MPa			Min. % elongation after fracture
		Nominal thickness (mm)			Nominal thickness (mm)
		≥3 ≤50	≥50 ≤100	≥100 ≤150	≥3 ≤50	≥50 ≤100	≥100 ≤150
S890QL	1.8983	890	830	––	940/1100	880/1100	––	11

Notch Impact Energy:

Grade	Sample Orientation	@ 0°C	@-20°C	@-40°C	@-60°C
S890QL	Longitudinal	50 J	40 J	30 J	––
	Traverse	35 J	30 J	27 J	––

1.Grade:
S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

2. Specification:
  Thickness: 8mm to 300mm
   Width: 1500mm to 4200mm
   Length: 4000mm to 18000mm

3. Adopt Standard: EN10025-6 2004

4. Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technology, etc.

5. Delivery Time: 30-40days

6. Payment Item: 30% TT, or LC and TT.

7..Trade Terms: FOB, CFR, CIF

8. Steel Services: Cutting, Painting, Pretreatment, and The third party inspection in DNV, BV, LR, ABS, SGS ,etc and others in super thick ship steel plate.

Gangsteel is specialized in super thick low alloy, high strength steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now.
If you have any inquiry in steel price or technical conditions, please contact us freely.

en 10025-6 s890ql steel plate rolling machine manufacturer

A514 is a traditional quenched and tempered alloy steel plate designed for structural purposes. A514 steel is on the market in quite a lot of chemistriesA, B, C, E, F, H, J, K, M, P, Q, S, and T. All of those grades have the same mechanical properties. Conquest Steel & Alloys – Offering A514 Structure Steel ASTM, For Construction, 3mm to 140mm at Rs one hundred fifteen/kilogram in Mumbai, Maharashtra.

Leeco ® Steel carries a deep stock of carbon – or gentle – metal plate as well as High Strength Low Alloy – or HSLA – metal plate. HSLA boasts the next strength, lower weight and good machinability and ductility compared to typical mild carbon steel grades.

en 10025-6 s890ql steel plate weight calculator manufacturer,en 10025-6 s890ql steel plate for sale manufacturer,en 10025-6 s890ql steel plate 1/4 manufacturer,en 10025-6 s890ql steel plate armor manufacturer,en 10025-6 s890ql steel plate thickness manufacturer,en 10025-6 s890ql steel plate 1/8 manufacturer,en 10025-6 s890ql steel plate 3/16 manufacturer,en 10025-6 s890ql 3/16 steel plate manufacturer,en 10025-6 s890ql 1/8 steel plate manufacturer,en 10025-6 s890ql steel name plates manufacturer,en 10025-6 s890ql steel plate on road manufacturer,en 10025-6 s890ql steel plate 1/2 manufacturer,en 10025-6 s890ql steel plate sizes manufacturer,en 10025-6 s890ql 1/2 steel plate manufacturer

A-514 / T1 Steel Plate A514 Steel Plate aka T1 metal plate is a excessive strength steel plate designed for functions requiring optimum EN10025-6 S890QL Steel supplier impression and abrasive resistance. Hardox® put on plate is the world’s main abrasion-resistant metal.

This standard covers excessive energy low-alloy structural steel shapes, plates and bars for use in riveted, bolted or welded construction with yield level strengths from forty two,000 psi through 50,000 psi . The atmospheric corrosion resistance of this metal is considerably better than that of carbon structural steel. Buy prime quality and scorching sale low alloy excessive energy steel plate in bulk with GNEE which is one of the main low alloy high power steel plate producers and suppliers in China. Our factory also presents free pattern for quality checking.

The standard specifies seven steel grades, and their yield strength at ambient temperature is different. All steel grades to be supplied in the following steps shall be established when required. The specified minimum value of impact energy when the weather is not lower than – 20 �� (no label). When the temperature is not lower than – 50 ��, the specified minimum value of impact energy is expressed in L. (except for s960), the minimum amount of impact energy set when the temperature is not lower than – 60 �� is defined as L1. In quenching and tempering delivery conditions (q) and grade L: Steel en 10025-6-s460ql; or steel en10025-6-1.8906.