steel shops EN10025-6 S550Q 1.8924 steel plate
Content
high strength steel yield strength EN10025-6 S550Q 1.8924 steel plate
Our gangsteel S550Q Main Application:EN100256|S460Q|S460QL|S460QL1|S500Q|S500QL|S500QL1|S550Q|S550QL|S550QL1|S620Q|S620QL|S620QL1|S690Q|S690QL|S690QL1|S890Q|S890QL|S890QL1|S960Q|S960QL|S960QL1| is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car Loader.
Steel, as everyone knows, offers nice energy though it is mild in weight. In truth, the ratio of power to weight for steel is the bottom than some other building materials out there to us. Yield power is the yield limit of ONORM S 500 Q ÖNORM EN when yielding occurs, that is, the stress resisting micro-plastic deformation. The exterior pressure larger than the yield energy will make the ONORM S 500 Q ÖNORM EN parts everlasting failure and unable to recover. Less than this, the ONORM S 500 Q ÖNORM EN elements will return to their authentic shape. Unitedsteel Mill Supply High strength metal plate, and have varied stock measurement, If you require excessive energy metal plate. Unitedsteel Mill Supply High strength metal plate, and have numerous stock measurement, if you require excessive strength steel plate, please contact us via Email to contact us.
- The bodily properties of ONORM S 500 Q ÖNORM EN embrace high strength, low weight, durability, ductility and resistance to corrosion.
- This operation offers the product particular features with respect to form, dimensional accuracy and surface end.
- Steels equipped to this commonplace are appropriate for hardening and in the quenched and tempered condition have good toughness at a given tensile strength.
- Yield power is the yield limit of ONORM S 500 Q ÖNORM EN when yielding occurs, that’s, the stress resisting micro-plastic deformation.
Thus, modified requirements need only to be written into one document. The manufacturer reserves the proper to change the chemical composition.
These requirements are the latest European requirements for structural metal. Unitedsteel Plate Factory are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and excessive energy metal plate, heavy plate and wide, heavy plate, Which is a big steel plate provider mill. Our stock warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy metal plates. are specialised in producing and exporting S355J2, S355K2, S355K2 and So on. Amongst others, our product portfolio includes steels with higher yield level within the tempered state based on DIN EN .
Post free purchasing for requirement of steel S550Q (1.8904) Mechanical properties of steel S550Q (1.8904)Reviews 2COMP Cams Hi-Tech Pushrods Free Shipping on Feb 28,2016 s550q materials#0183;Find COMP Cams Hi-Tech Pushrods and get Free Shipping on Orders Over $ninety 9 at Summit Racing! The steels laid out in part 2 and three of this normal are relevant to sizzling rolled flat merchandise within the vary 1,5mm to 20mm for steels with ReH 2 and steels 1,5mm to 16mm for steels with minimal yield power.
steel sale near me EN10025-6 S550Q 1.8924 steel plate
Gangsteel factory S550Q Steel Standard :EN10025-6,ASTM-A578/A578M,ASTM-A435/A435M,EN10160
Our Rolling Size: Thickness*Width*Length 3-600mm*1220-4200mm*5000-18000mm
UT (Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing),CR��Control Rolled����NR��Normalizing Rolled���� N(Normalized), Q+T(Quenched and Tempered), Z Direction Test(Z15,Z25,Z35) , Charpy V-Notch Impact Test(-20��,-40��), HIC test, NDT , PWHT( Simulated Post Weld Heat Treatment),NACE0175,The Third Party Test (Such as SGS Test), Coated or Shot Blasting and Painting.
Relative grade of EN10025-6:
Colloquially, this steel is also known as high-energy constructional steel. The normal contains forged steels for use in general engineering including equipment , automotive, armament , agriculture and so on. These are merchandise of varied cross part shapes which are obtained after descaling, by drawing of scorching rolled bar or rod on a draw bench. This operation provides the product particular features with respect to form, dimensional accuracy and floor finish. Steels supplied to this normal are appropriate for hardening and in the quenched and tempered condition have good toughness at a given tensile strength. The bodily properties of ONORM S 500 Q ÖNORM EN embrace high power, low weight, durability, ductility and resistance to corrosion.
1. EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL steel plate grade.
S550Q steel plate is a hydroelectric steel plate, which is a low-alloy high-strength steel plate. It is a German standard steel plate. It has the characteristics of high yield and more strengthening alloy elements.
Mechnical property for EN 10025-6 S550Q High strength steel:
Thickness (mm) | |||
S550Q |
≥ 3 ≤ 50 |
> 50 ≤ 100 |
> 100 |
Yield strength (≥Mpa) |
550 |
530 |
490 |
Tensile strength (Mpa) |
640-820 |
640-820 |
590-770 |
2. Delivery status: delivery in quenched and tempered quenched and tempered state.
It is also possible to add flaw detection standard requirements, flaw detection level requirements, Z-direction performance requirements, requirements for adding special alloy elements, etc., but it needs to be communicated between the supplier and the buyer and indicated in the contract.
3. Executive standard: WYJ (Wugang Technology Research and Development Association Standard)
4. The chemical composition of S550Q steel plate (melting analysis)
Chemical composition % of the Product analysis of grade EN 10025-6 S550Q (1.8904)
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
Nb |
Cu |
Ni |
B |
N |
Zr |
Ti |
0.22 |
0.86 |
1.8 |
0.8 |
0.03 |
0.017 |
1.6 |
0.74 |
0.14 |
0.07 |
0.55 |
2.1 |
0.006 |
0.016 |
0.17 |
0.07 |
C: <=0.22
Si:<=0.86 Si:<=1.80 P:<=0.030 S:<=0.017
N: <=0.0060
Cu: <=0.55
Mo:<=0.74 Cr:<=1.60 V:<=0.14 Nb:<=0.07
Ti: <=0.07
B: <=0.0060
Ni: <=2.10
5. Mechanical properties of S550Q steel plate:
Yield strength Tensile strength Elongation%
6. What is EN 10025-6 QT S550Q STEEL?
EN 10025-6 QT S550Q STEE also named as S550Q high strength low alloy steel plate under steel stand EN 10025-6 which is for hot rolled structural steels with high yield strength and tensile strength in quenched and tempered delivery condition.Quenching operation which consists of cooling a ferrous steel plate more rapidly than in still air.
Tempering heat treatment applied to a ferrous steel plate generally after quench hardening or other heat treatment to bring the properties to the required level.S550Q shall be done low temperature impacting test under minus 20 centigrade.
If you have any inquiry in steel worth or technical situations, please contact us freely. Metals Depot stocks a lot of of sizes of metal angle that you can purchase on-line in in a position to ship precut or mill lengths or you can order just what you want customized Cut to Size in small or massive quantity at wholesale costs. COMPARISON OF ASME SPECIFICATIONS AND … ASME SA-370 specification is comparable with ASTM A 370.
Global Welded Steel Conveyor Chain Market 2020 – Impact of COVID-19, Future Growth Analysis and Challenges
On the opposite hand, the letters with a designation JR confirms that the availability has been administered a Charpy V-notch impression take a look at. At room temperature, the value of the influence checks of the EN S235J2 Material stands at 27 joules. Quenching operation which consists of cooling a ferrous metal plate more rapidly than in nonetheless air.Tempering heat treatment utilized to a ferrous metal plate usually after quench hardening or other heat remedy to deliver the properties to the required degree. High yield power steel plate S500Q beneath EN owned the minimum yield strength at 500 Mpa and tensile power within Mpa. Depending on the thickness of the product and the manufacturing circumstances, the manufacturer may add to the metal one or several alloying elements up to the maximum values given to be able to obtain the required properties. Gangsteel is specialized in tremendous thick low alloy, high strength metal plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now. BS EN Stainless Steels -Part three Technical delivery circumstances for semi-completed merchandise, bars, rods and sections for common functions.
need buy steel EN10025-6 S550Q 1.8924 steel plate
News
steeldriver com EN10025-6 S550Q 1.8924 steel plate
S500Q high energy metal plate also named as S500Q high strength low alloy metal plate underneath steel stand EN which is for warm rolled structural steels with excessive yield energy and tensile power in quenched and tempered supply situation. The suitability of en structural steel pipe includes functions corresponding to bolted connections, welding, in addition to riveting. Since non-alloy S235JR is well weldable and bendable, the material works out to be nicely fitted to use in non-important structures. The machinability characteristics of the EN Steel Pipe material is corresponding to that of mild metal grades. Typically S235JR pipes underneath this specification can be utilized in structural purposes corresponding to automobile buildings, the construction of buildings and bridges, and tools and cutters as well as for some parts in shipbuilding. The EN specification refers to a set of European requirements which cowl structural steels along with specifying their technical delivery conditions as well. The minimal content of 0.015% applies to soluble aluminium,this value is considered attained if the total aluminium content material materials is no less than 0.018%; in case of dispute the soluble aluminium content material shall be determined New opportunities for consumers!
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.
- EN 10025-6 S550QL 1.8926 high strength steel vs high speed steel
- high yield steel bars EN10025-6 S550Q 1.8924 steel plate