1.8987 EN 10025-6 S620QL1 steel importer

Gangsteel supply EN10025-6 S620QL1, EN 10025-6 S620QL1,1.8987 QT high strength steel plate. We also provide the cutting service, our thickess 5mm to 180mm. S620qL1 steel plate similar material: S590Q, , S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate executive standard: EN10025-6, GB/T1627

S620Q STEEL PLATE_Steel SupplierBBNSTEEL exported EN .2 of ABS,DNV,LR,BV Class Approval material S620Q,EN S620Q,S620Q STEEL PLATE. S355J2WP is a scorching rolled structural metal with anti-corrosion function, additionally called weathering steel and environment corrosion resistance steel, underneath normal EN .
S620QL1

S620Q, S620QL, EN 10025-6 S620QL1 steel plate heat treatment process (quenching and tempering)

 

1. S620 steel plate is a quenched and tempered high-strength steel plate. The series grades are S620Q, S620QL, and EN 10025-6 S620QL1. It is a low-carbon non- structural steel plate of European standard EN10025-6.
Domestic Gang Iron and Steel Company can produce it.
In order to ensure its performance, this type of steel plate has a carbon content below 0.2%.
Chemical composition for EN 10025-6 S620QL1 High strength steel (Heat Analysis Max%)

Main chemical elements composition of EN 10025-6 S620QL1

C

Si

Mn

P

S

N

B

Cr

0.20

0.80

1.70

0.020

0.010

0.015

0.005

1.50

Cu

Mo

Nb

Ni

Ti

V

Zr

0.50

0.70

0.06

2.0

0.05

0.12

0.15

 

2. S620Q, S620QL, EN 10025-6 S620QL1 steel plates, where S means structural steel, and Q means that the impact temperature of the steel plate is -20°C,

 

Then QL means that the impact temperature of the steel plate is -50°C. Then guess what QL1 represents. QL1 means that the impact temperature of the steel plate is -60°C. 620 means that the thickness of the steel plate is £50mm. The minimum yield strength value is specified.

 

3. The steel specified in this standard can be used for the production of hot-rolled plates with steel grades S460, S500, S550, S620, S690, S890, and S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm. After quenching and tempering
The specified minimum yield strength of steel is 460MPa1) to 960 MPa1)
Mechnical property for EN 10025-6 S620QL1 High strength steel:

Thickness (mm)

EN 10025-6 S620QL1

≥ 3 ≤ 50

> 50 ≤ 100

> 100

Yield strength (≥Mpa)

620

580

560

Tensile strength (Mpa)

700-890

700-890

650-830

Relative keywords:
S620QL1 steel plate|S620QL1 steel plates|S620QL1 plate sets|S620QL1 plate steel|S620QL1 stainless steel plate|S620QL1 stainless steel plates|S620QL1 enamel plates|S620QL1 steelite plates|S620QL1 carbon fiber plate|S620QL1 bowl plate set|S620QL1 cheap plates|S620QL1 designer plates|S620QL1 steel base plate|S620QL1 mild steel plate|S620QL1 steel plate thickness|S620QL1 steel plates suppliers|S620QL1 ground plate|S620QL1 steel target plates|S620QL1 steel base plates|S620QL1 buy steel plate|S620QL1 carbon fiber plates|S620QL1 buy plates|S620QL1 plate steel thickness chart|S620QL1 plates steel|S620QL1 thick steel plate|S620QL1 steel plate near me|S620QL1 used steel plate|S620QL1 cost of steel plate|S620QL1 stainless steel plate thickness|S620QL1 price of steel plate|S620QL1 steel plate |S620QL1 used plate steel|S620QL1 buy steel plates online|S620QL1 stainles steel plate|S620QL1 kids plates set|S620QL1 expanded metal plate|
4. Steel grades and varieties

 

The standard specifies 7 steel grades, and they have different yield strengths under ambient temperature conditions.
When required, all supplied steel grades from the following varieties shall be specified.
The minimum value specified for impact energy when the temperature is not lower than -20°C (no mark).
When the temperature is not lower than -50℃, the specified minimum value of impact energy is represented by L.
(Except for S960) The minimum specified impact energy when the temperature is not lower than -60℃ is represented by L1.
In quenching and tempering delivery conditions (Q) and L: steel EN 10025-6-S460QL; or steel EN10025-6-1.8906.

 

5. Delivery conditions of S620Q, S620QL, EN 10025-6 S620QL1 steel plate

 

Quenching + tempering (Q).
Note: Quenching and then tempering directly after hot rolling is considered equivalent to conventional quenching and tempering.

 

6. Impact performance of S620Q, S620QL, EN 10025-6 S620QL1 steel plate

 

S620Q at -20℃; S620QL at -50℃; EN 10025-6 S620QL1 at -60℃

Others steel
S620QL1 plate steel suppliers|S620QL1 standard steel plate size|S620QL1 used steel plates|S620QL1 steel plates|S620QL1 garden plate|S620QL1 steel plate supply|S620QL1 steel plates near me|S620QL1 steel plate distributors|S620QL1 circular steel plate|S620QL1 steel plate online|S620QL1 steel metal plates|S620QL1 custom steel plate|S620QL1 steel plate size|S620QL1 mild steel plates|S620QL1 metal steel plate|S620QL1 cost of plate steel|S620QL1 standard steel plate thickness|S620QL1 steel plate pricing|S620QL1 plates stainless steel|S620QL1 steel plate dimensions|S620QL1 standard steel plate sizes|S620QL1 cheap steel plate|S620QL1 steel plate sales|S620QL1 steel plate us|S620QL1 steel plate products|S620QL1 metal steel plates|S620QL1 steel plate company|S620QL1 steele plates|S620QL1 corrugated steel plate

Much More Than Paperwork

Technical delivery circumstances for flat merchandise of excessive yield power structural steels within the quenched and tempered condition COMPARE GRADES The contents from this Steel & Alloy Database will not be reproduced. Standard EN Technical supply situations for flat merchandise of excessive yield strength structural steels in the quenched and tempered scenario. Approval By Third Party.High power constructional steel acc DIN EN High-power constructional metal in tempered condition primarily based on DIN EN . EN S620QL plate, S620QL High Strength Steel, S620QL Q+T, S620QL UT S2E2 EN S620QL plate, S620QL High Strength Steel, S620QL Q+T, S620QL UT S2E2 . S620Q commonplace toughness, S620QL high toughness and S620QL1 additional toughness. S620Q – in accordance with EN with minimal impact values all the way down to -20°C (-4°F)EN S620Q plate-SA L Stainless SteelEN S620Q plate, S620Q High Strength Steel, S620Q Q+T, S620Q UT S2E2 . S620Q – in accordance with EN with minimal impression values all the way down to -20°C (-four°F) S620QL – according to EN with minimal impact values right down to -40°C (-40°F)EN S460QL1 steel plates supplier steel plate en s620ql1 steel chemical compositionEN S460QL1 steel plates provider steel plate Leave a Message Get a value EX-Stock Promotion Center EN S460QL1 steel plates are excessive yield strength metal plates, which benefit from the minimum yield strength at 460 Mpa and tensile power within Mpa.
The info below provides answers to questions associated to Ashland Safety Data Sheets and compliance with REACH. Are the Ashland SDS for merchandise sold inside Europe compliant with REACH? Ashland is in compliance with the requirements of REACH.BÖHLER FOX EV 65 – AlruqeeOperating information Polarity DC ( + ) Redrying if necessary °C, min. 2 h Electrode identification FOX EV G E NiMo B ø 2.5 3.2 4.0 four,eight 5.0 L mm Amps A Preheating and interpass temperature, as well as post welds warmth remedy as required by s550ql1 knowledge sheetBBNSTEEL STEEL. Gangsteel provide EN S690QL excessive energy, high yield, structural alloy quenched and tempered metal plate.

  • Gangsteel is specialised in tremendous broad and heavy low alloy, excessive strength metal plate, cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the tremendous thickness plate up to 300 mm now.
  • ASTM A131 DH32 shipbuilding steel is not solely the high tensile power metal but additionally is the Hull structural steel.
  • We sincerely invite new and common purchasers to visit our mills and inquiry from Gangsteel for aggressive value.
  • Ashland is in compliance with the necessities of REACH.BÖHLER FOX EV sixty five – AlruqeeOperating information Polarity DC ( + ) Redrying if essential °C, min. 2 h Electrode identification FOX EV G E NiMo B ø 2.5 3.2 four.0 4,eight 5.0 L mm Amps A Preheating and interpass temperature, as well as submit welds heat therapy as required by s550ql1 data sheetBBNSTEEL STEEL.

ASTM A283 plate metal options low and intermediate tensile power carbon metal plate of structural high quality. Metinvest produces low-alloy and alloyed excessive-power steel in accordance with the requirements of international standards and prospects’ specs. The products may be delivered after particular kinds of rolling and warmth remedy offline . If you have an interest in these features, please contact us. The commonplace contains solid steels for use normally engineering including equipment , automotive, armament , agriculture etc. These are products of varied cross section shapes which are obtained after descaling, by drawing of hot rolled bar or rod on a draw bench.

What is EN10025-6 s620ql1 equal grade and standards?
ASTM A514Gr.B A514Gr.P ASTM A514 A514M
High-strength structural board Q390C Q390D Q390E, Q420A Q420B Q420C Q420D Q420E, GB T3274-2007
Q460C Q460D Q460E, Q500C Q500D Q500E, Q550C Q550D Q550E, Q620C Q620D Q620E, Q690C Q690D Q690E GB T1591-2008
XGQ690E Q XGJX34-2008
Q460CFC Q460CFD Q460CFE, Q500CFC Q500CFD Q500CFE, Q550CFC Q550CFD Q550CFE, Q620CFC Q620CFD Q620CFE, Q690CFC Q690CFD YB T4137-2005
Foreign high-strength structural panel S355J2 (additional welding seam cold bending test requirements) EN10025-2:2004
S355N, S355NL EN10025-3:2004
S355M, S355ML, S420M ML, S460M ML EN10025-4: 2004
S460Q S460QQL S460QQL1, S500Q S500QL S500QL1, S550Q S550QL S550QL1, S620Q S620QL S620QL1 EN10025-6:2004
A572Gr.60, A572Gr.65 ASTMA572 A572M-2007
A678Gr.A A678Gr.B A678Gr.C A678Gr.D ASTMA678 A678M-2005
SM490YA SM490YB, SM520B SM520C, SM570 JIS G3106-2008

Low alloy and excessive strength metal plate,heavy plate and wide,heavy plate,Which is a large metal plate provider mill.Our inventory warehouse had about 30000tonsEN S690Q plate,S690Q High Strength Steel,S690QLow alloy and excessive power steel plate,heavy plate and broad,heavy plate,Which is a large metal plate supplier mill.Our inventory warehouse had about 30000tonsEN S620Q plate,S620Q High Strength Steel,S620QS620QL1- based on EN with minimal influence values all the way down to -60 S620QL1 inventory#176;C (-seventy six S620QL1 inventory#176;F) Unitedsteel Mill Supply High strength steel plate,and have varied inventory dimension,if you require high strength steel plate,please contact us by way of Email to contact us. This a part of EN provides the properties and other delivery conditions for flat merchandise for basic purposes, i.e. not for pressure vessels nor for aerospace or other specialised purposes, such as springs, It is used for ordering purposes. It contains sixty eight steels, more than BS which it largely replaces. Unitedsteel Mill Supply High power steel plate, and have varied inventory measurement, If you require excessive strength steel plate.

En10025 6 S460ql Information Sheet, Astm A519 Grade 1020 Supplier Alloy Metal S620ql1

1.8987 EN 10025-6 S620QL1 plate price stainless steel
steels plates
This entails cold deformation with out removing material. This operation gives the product special features with respect to shape, dimensional accuracy and surface finish. Steels provided to this normal are appropriate for hardening and in the quenched and tempered situation have good toughness at a given tensile energy. These requirements are the most recent European standards for structural steel.
plate plates steel

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone:

Gangsteel supply EN10025-6 S620QL1, EN 10025-6 S620QL1,1.8987 QT high strength steel plate. We also provide the cutting service, our thickess 5mm to 180mm
, ,

plate steels

Know About Brand Players: Stockach Aluminium GmbH, Schrott-Bosch, Inter Metals GmbH, ATC Metals, TSR Recycling GmbH & Co. KG, WMR Recycling, etc. – The Courier

Global Steel Scrap Market (2020-
S620QL1 STEEL PLATE_Steel Gangsteel exported EN .2 Certificate of ABS,DNV,LR,BV Class Approval materials S620QL1,EN S620QL1,S620QL1 steel plate. S620QL1- in accordance with EN with minimum impact values all the way down to -60°C (-76°F) Unitedsteel Mill Supply High strength metal plate, and have varied inventory measurement, if you require excessive strength metal plate, please contact us through Email om to contact us.en s500ql exporter – Carbon steels – A283 carbon s620ql1 largeSupply EN S890QL1 carbon metal plate samai. EN steel grade specification is a excessive yield energy structural steels within the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
The contents from this Steel EN S690QL Brown McFarlaneFabrication of EN S690QL Steel Plate.High energy quenched and tempered steel plate can be simply welded and fabricated but its excessive yield strength and tensile energy in contrast with mild steel means that it must be handled with some caution.We have supplied information which is meant as a basic guide to various fabrication methods. Unitedsteel Stainless Factory; Unitedsteel Plate Factory are specialised in producing and exporting S355J2,S355K2,S355K2 and So on.Low alloy and high strength metal plate,heavy plate and extensive,heavy plate,Which is a big steel plate provider mill.EN10025 S460NL Steel Plate – S460Q S500Q S550Q S620QEN10025 S460NL Steel Plate – S460Q S500Q S550Q S620Q S690Q S890Q Products,China Trading Company.Standard of EN10025,EN10137,EN hot rolled products of structural steels–Technical delivery circumstances for flat merchandise of excessive yield strength structural steels within the quenched and tempered condition which grades areEN S620QL1 gentle steel-LUXURY Steel Grades and EN S550QL structural steel .Supplier from China.Product Id . S620QL1 metal distributor MS steel plate,shipbuilding Give You Our Best Carbon Steel Plate EN S690QL . Gangsteel supply EN steel grade specification is a high yield strength structural steels within the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL . s620ql steel stpg410 metal pipe suppliers – immodienst.beHigh yield strength steel plate Gangsteel supply EN steel grade specification is a excessive yield energy steel plate and structural steels in the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, Get Price; China Professional Supply Jis G3454 Stpg 370 Seamless welded steel pipe manufacturing facility supply bs standardEN Non-alloy metal tubes suitable for welding and The commonplace is relevant to tubes of nominal dimension DN8 to DN150 in light, medium and heavy thickness.

What Gangsteel facotry can do other grade too?
Professional ordering of Xinyu Steel Plant’s or other first class factory of medium and heavy plates, container plates, ship plates, bridge plates, high-rise plates, pipeline steel, general plates, low alloy plates, wear-resistant plates, etc
Alloy structural plate 12Cr1MoV, 15CrMo Q XGJX42, 49-2009
Pipeline steel plate API 5L B PSL2 API 5L X42 PSL2 API 5L X46 PSL2 API 5L X52 PSL2 API 5L X56 PSL2 API 5L X60 PSL2 API 5L X65 PSL2 API 5L X70 PSL2 API SPEC 5L-2007
API 5L X42 PSL1 API 5L X46 PSL1 API 5L X52 PSL1 API 5L X56 PSL1 API 5L X60 PSL1 API 5L X65 PSL1 API 5L X70 PSL1 API 5L B PSL1
X42 X46 X52 X56 X60 X65 X70
API 5L BM PSL2 API 5L X42M PSL2 API 5L X46M PSL2 API 5L X52M PSL2 API 5L X56M PSL2 API 5L X60M PSL2 API 5L X65M PSL2 API 5L X70M PSL2
X42R X42M X46M X52M X56M X60M X65M X70M -PSL2
L290 L320 L360 L390 L450 L485 GB T21237-2007

1.8987 EN 10025-6 S620QL1 plate price stainless steel
Tagged on: