st52-3n equivalent in indian standard
st52-3 ekvivalent
1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis
gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate
st52-3 round bar
This statement suggests that the enrichment of carbon on the phase boundaries can improve the vitality barrier for dislocation emission, which provides a favorable situation for plastic move avalanches and thus discontinuous yielding. These findings prolong the present understanding of the yielding habits in medium-Mn steels, and extra importantly, make clear using and manipulating part boundary segregation to enhance the mechanical efficiency of multiphase metallic materials. We are engaged in producing and promoting stainless steel, wear resistant metal plate, weathering steel plate, high energy carbon steel plate, alloy metal, boiler and Pressure vessel metal plate, we aslo produce metal pipes, coils and so forth. A ST 52 metal plate, DIN17135 A ST 52 metal plate is a sort of materials for boiler and strain vessel metal.
DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:
|
DIN |
ASTM |
EN |
JIS |
Chemical Composition |
C.E. |
||||||||||
|
C |
Si |
Mn |
Cr |
Mo |
Ni |
V |
W |
S |
P |
CU |
|||||
|
17100 St52-3N |
A572-50 |
10025-2:2004 S355J2+N |
G3106 SM490YB |
max 0.22 |
max 0.55 |
max 1.60 |
– |
– |
– |
– |
– |
max 0.035 |
max 0.035 |
– |
max 0.047 |
St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.
|
Chemical Composition (product analysis), %, ≤ |
|||||||||||
|
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
|
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.065 |
0.065 |
– |
≤ 30 |
Fully Killded |
|
|
0.24 |
30 <d ≤100 |
||||||||||
|
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.045 |
0.045 |
– |
≤ 30 |
||
|
0.24 |
30 <d ≤100 |
||||||||||
|
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.22 |
0.60 |
1.70 |
0.035 |
0.035 |
– |
0.60 |
≤ 30 |
||
|
0.24 |
30 <d ≤100 |
||||||||||
St52-3 Steel Properties
Physical Properties
- Material St 52-3 Density: 7.85 g/cm3
- Melting point: 1420-1460 °C (2590-2660 °F)
DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate
|
Thickness (mm) |
Yield Strength Reh min (N / mm2) |
Tensile Strength Rm min (N / mm2) |
Elongation A5 min (%) |
Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm. |
|
3<thk<100 |
315-355 |
490-630 |
max 22 |
27 Joules at -20 C |
St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.
|
Chemical Composition (ladle analysis), %, ≤ |
|||||||||||
|
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
|
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.040 |
0.040 |
– |
≤ 30 |
Fully Killded |
|
|
0.22 |
30 <d ≤100 |
||||||||||
|
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.035 |
0.035 |
– |
≤ 30 |
||
|
0.22 |
30 <d ≤100 |
||||||||||
|
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.20 |
0.55 |
1.60 |
0.025 |
0.025 |
– |
0.55 |
≤ 30 |
||
|
0.22 |
30 <d ≤100 |
||||||||||
DIN17100 ST52-3 EQUIVALENT STEEL GRADES
| EN 10025 – 2 |
EN 10025+A1 |
?SN |
DIN 17100 |
||
|
EN10027-1 |
EN10027-2 |
EN10027-1 Grade |
EN10027-2 Grade |
|
|
|
S235JR2 |
1.0038 |
S235JRG2 |
1.0038 |
11375 |
RSt 37-2 |
|
S235J0 |
1.0114 |
S235J0 |
1.0114 |
11378 |
St 37-3U |
|
|
– |
S235J2GR3 |
1.0116 |
11378 |
St 37-3N |
|
S235J2 |
1.0117 |
S235J2G4 |
1.0117 |
– |
– |
|
S275JR |
1.0044 |
S275JR |
1.0044 |
11443 |
St 44-2 |
|
S275J0 |
1.0143 |
S275J0 |
1.0143 |
11445 |
St 44-3U |
|
|
– |
S275J2GR3 |
1.0144 |
11448 |
St 44-3N |
|
S275J2 |
1.0145 |
S275J2G4 |
1.0145 |
– |
– |
|
S355JR |
1.0045 |
S355JR |
1.0045 |
11523 |
St 52-3 |
|
S355J0 |
1.0553 |
S355J0 |
1.0553 |
11523 |
St 52-3U |
|
|
– |
S355J2G3 |
1.057 |
11503 |
St 52-3N |
|
S355J2 |
1.0577 |
S355J2G4 |
1.0577 |
– |
– |
Material St 52-3 Datasheet – 3
|
Yield strength (≥ N/mm2); Thickness (d) mm |
||||||
|
Steel (Steel number) |
d≤16 |
16< d ≤40 |
40< d ≤63 |
63< d ≤80 |
80< d ≤100 |
>100 |
|
St52-3 |
355 |
345 |
335 |
325 |
315 |
by agreement |
Tensile Strength
Material St 52-3 Datasheet – 4
|
Tensile strength (≥ N/mm2); Thickness (d) mm |
|||
|
Steel (Steel number) |
d<3 |
3 ≤ d ≤ 100 |
>100 |
|
St 52-3 |
515-680 |
490-630 |
by agreement |
Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5
|
Elongation (≥, %); Thickness (d), mm |
||||||||
|
Steel (Steel number) |
0.5 ≤d <1 |
1≤ d <1,5 |
1,5≤ d <2 |
2≤ d <2,5 |
2,5≤ d <3 |
|||
|
St52-3U |
14 |
15 |
16 |
17 |
18 |
|||
|
St52-3N |
12 |
13 |
14 |
15 |
16 |
|||
|
Elongation (≥, %); Thickness (d), mm |
||||||||
|
Steel (Steel number) |
3 ≤d ≤40 |
40< d ≤63 |
63 < d ≤100 |
>100 |
||||
|
St52-3 |
22 |
21 |
20 |
by agreement |
||||
|
St52-3N |
20 |
19 |
18 |
|||||
which will give you an idea about our merchandise & make. EN Hot rolled products of non-alloy structural steel. The yield power and the tensile strength vary considerably with the part measurement.
The disappearance of serrations at 200 °C was related to the elevated diffusion intensity. This table indicates the approximate relationship between international grades and their Australian equivalents. forty five rows st52 yield energy#0183;DIN ST52-2 Angle Steel – Good Weldability.ST52 metal angle with 0.23% carbon content material and 355 MPa yield level energy is appropriate for weldable supporting elements.According to chemical composition mechanical property,it’s much like S355N of EN . ST50-2 metal plate, underneath DIN17100 normal ST50-2 metal plate, under DIN17100 commonplace, we can regard ST50-2 metal plate as frequent carbon structural metal .ST50-2 steel plate is one mainly of Carbon structural metal, ST50-2 is a sort of steel sheet beneath DIN standard which is used to build ship, bridge, belongs to excessive strength sheet.
1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,
The ultrafine-grained duplex microstructure of medium-Mn metal consists of a considerable quantity of austenite and ferrite/martensite, reaching an extraordinary steadiness of mechanical properties and alloying price. In the current work, two warmth therapy routes have been carried out on a chilly-rolled medium-Mn steel Fe-12Mn-3Al-0.05C (wt.%) to realize comparable mechanical properties with completely different microstructural morphologies. One warmth therapy was merely austenite-reverted-transformation annealing and the other one was a successive mixture of austenitization and ART annealing. The distinct responses to hydrogen ingression have been characterised and discussed. The UFG martensite colonies produced by the AUS + ART process had been found to be detrimental to ductility regardless of the quantity of hydrogen, which is probably going attributed to the lowered lattice bonding power based on the H-enhanced decohesion mechanism.
- Macrosegregation was absent in the as-solid strip.
- The microstructure of the as-forged strip consisted of martensite and austenite (∼10 vol.-%), and the solidification structure was characterised by dendritic structure.
- The NACE MR0175 is a specification by the National Association of Corrosion Engineers which lists the API 5L Carbon Steel API 5L Seamless and ERW Line Pipe in PSL1/ PSL2The minimum tensile energy and yield strength of those two product specification levels are the same at sixty six,700Ksi for tensile strength and 52,000Ksi for yield strength.
- With an increase in IA temperature from 680 to 725 and to 755°C, austenite fraction in intercritically annealed steels was increased from 22 to 45% after which decreased to 27%.
- The 710°C intercritically annealed steel yielded wonderful mechanical properties with a tensile power of ∼1007 MPa and whole elongation of ∼48%, achieved by a excessive volume fraction of austenite (∼forty two%) with appropriate mechanical stability.
ST37 2 steels Mechanical properties is Yield energy greater than 235MPa, tensile energy Mpa.ST37 2 steel is mainly used for riveting, bolting, welding functions. Structural Steels like ST37 2 is used in many functions, combining good welding properties with assured strengths. Steel plate St52-3 is most traditional used among all kinds of low alloy steel grades.It is the same as Chinese metal grade Q345B,low alloy high strength metal plate.
With an increase in IA temperature from 680 to 725 and to 755°C, austenite fraction in intercritically annealed steels was elevated from 22 to 45% and then decreased to 27%. The 710°C intercritically annealed steel yielded glorious mechanical properties with a tensile power DIN 17100 ST 52-3 of ∼1007 MPa and total elongation of ∼48%, achieved by a high volume fraction of austenite (∼42%) with acceptable mechanical stability.
Range of Yield and Tensile properties in transversal course Yield to Tensile ratio Total elongation Grade Delivery conds. Y, R t0.5 MPa T, R m MPa R t0.5 /R m Elong . The combination of various section constituents to realize a mechanical composite impact for superior energy-ductility synergy has turn into an essential strategy in microstructure design in advanced excessive-strength steels. Introducing a number of phases in the microstructure essentially produces numerous section boundaries.
HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price