1.0570 preis
1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis
gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate
1.0570 st 52-3
gentle st523 metal plate astm a36 st37 st52 ss41 The zinc coating quantity will meet Chinese or worldwide standard necessities. With a sure degree of slip resistance, good corrosion resistance, stunning look and financial cost, galvanized steel checker plate is ST52 3 BEBON metal steel plate sheetST52 3 steels is a low alloy, excessive power structural steel which may be readily welded to other weldable steel. ST52 3 steels Mechanical properties is Yield energy greater than 355 MPa, tensile power 490 630Mpa. With it, these plates are usually provided in control rolled or normalized situation Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
For additional information please go to ourImprint. Our merchandise have been utilized in every kind of areas, corresponding to aviation, aerospace, navigation, nuclear energy, chemical enterprise, digital information, equipment manufacture, petrochemical, automotive, instrument and meter, communication, transportation, and medical devices, and so DIN ST 52-3 forth. Some equal supplies is also stricter whereas others may be outside the bounds of the distinctive material in chosen parameters. These comparability desk is just intended as a sign of the closest khown equal grades. We specializes in st52 3 metal sheet good corrosion resistance tolerance.
ST 52-3 N, image N, normalized supply station. With this low carbon equal, it course of good cold forming property. ST 52-3 steel plates usual provided in normalized or control rolled delivery condition.S355J2/S355J2+N/S355J2G3 – Xingsheng Special steelS355J2 steel is a carbon manganese ,high yield non alloy steel. It known as S355 due to the common minimal yield for this material is 355 Mpa.As a structural metal,it has wonderful energy and weldability.S355J2 can be readily welded to other weldable metal.
DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:
DIN |
ASTM |
EN |
JIS |
Chemical Composition |
C.E. |
||||||||||
C |
Si |
Mn |
Cr |
Mo |
Ni |
V |
W |
S |
P |
CU |
|||||
17100 St52-3N |
A572-50 |
10025-2:2004 S355J2+N |
G3106 SM490YB |
max 0.22 |
max 0.55 |
max 1.60 |
– |
– |
– |
– |
– |
max 0.035 |
max 0.035 |
– |
max 0.047 |
St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (product analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.065 |
0.065 |
– |
≤ 30 |
Fully Killded |
|
0.24 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.045 |
0.045 |
– |
≤ 30 |
||
0.24 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.22 |
0.60 |
1.70 |
0.035 |
0.035 |
– |
0.60 |
≤ 30 |
||
0.24 |
30 <d ≤100 |
St52-3 Steel Properties
Physical Properties
- Material St 52-3 Density: 7.85 g/cm3
- Melting point: 1420-1460 °C (2590-2660 °F)
DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate
Thickness (mm) |
Yield Strength Reh min (N / mm2) |
Tensile Strength Rm min (N / mm2) |
Elongation A5 min (%) |
Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm. |
3<thk<100 |
315-355 |
490-630 |
max 22 |
27 Joules at -20 C |
St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (ladle analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.040 |
0.040 |
– |
≤ 30 |
Fully Killded |
|
0.22 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.035 |
0.035 |
– |
≤ 30 |
||
0.22 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.20 |
0.55 |
1.60 |
0.025 |
0.025 |
– |
0.55 |
≤ 30 |
||
0.22 |
30 <d ≤100 |
DIN17100 ST52-3 EQUIVALENT STEEL GRADES
EN 10025 – 2 |
EN 10025+A1 |
?SN |
DIN 17100 |
||
EN10027-1 |
EN10027-2 |
EN10027-1 Grade |
EN10027-2 Grade |
|
|
S235JR2 |
1.0038 |
S235JRG2 |
1.0038 |
11375 |
RSt 37-2 |
S235J0 |
1.0114 |
S235J0 |
1.0114 |
11378 |
St 37-3U |
|
– |
S235J2GR3 |
1.0116 |
11378 |
St 37-3N |
S235J2 |
1.0117 |
S235J2G4 |
1.0117 |
– |
– |
S275JR |
1.0044 |
S275JR |
1.0044 |
11443 |
St 44-2 |
S275J0 |
1.0143 |
S275J0 |
1.0143 |
11445 |
St 44-3U |
|
– |
S275J2GR3 |
1.0144 |
11448 |
St 44-3N |
S275J2 |
1.0145 |
S275J2G4 |
1.0145 |
– |
– |
S355JR |
1.0045 |
S355JR |
1.0045 |
11523 |
St 52-3 |
S355J0 |
1.0553 |
S355J0 |
1.0553 |
11523 |
St 52-3U |
|
– |
S355J2G3 |
1.057 |
11503 |
St 52-3N |
S355J2 |
1.0577 |
S355J2G4 |
1.0577 |
– |
– |
Material St 52-3 Datasheet – 3
Yield strength (≥ N/mm2); Thickness (d) mm |
||||||
Steel (Steel number) |
d≤16 |
16< d ≤40 |
40< d ≤63 |
63< d ≤80 |
80< d ≤100 |
>100 |
St52-3 |
355 |
345 |
335 |
325 |
315 |
by agreement |
Tensile Strength
Material St 52-3 Datasheet – 4
Tensile strength (≥ N/mm2); Thickness (d) mm |
|||
Steel (Steel number) |
d<3 |
3 ≤ d ≤ 100 |
>100 |
St 52-3 |
515-680 |
490-630 |
by agreement |
Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
0.5 ≤d <1 |
1≤ d <1,5 |
1,5≤ d <2 |
2≤ d <2,5 |
2,5≤ d <3 |
|||
St52-3U |
14 |
15 |
16 |
17 |
18 |
|||
St52-3N |
12 |
13 |
14 |
15 |
16 |
|||
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
3 ≤d ≤40 |
40< d ≤63 |
63 < d ≤100 |
>100 |
||||
St52-3 |
22 |
21 |
20 |
by agreement |
||||
St52-3N |
20 |
19 |
18 |
Rajendra Piping offer a big selection of St52, St52.3, St52.4 Seamless Pipe, St52 Carbon Steel Pipe and a various range of finish choices to satisfy the performance and look requirements for many purposes. We deliver St52, St52.3, St52.four Seamless Pipe from stock and warehousing as well DIN 17100 ST 52-3 as immediately from the mill.St52-3N steel plate provider in China – Steel Exporter , st52 3 geschliffen supplySt52-3N metal plate supplier in China Bebon as a supplier of St52-3N steel plate in China,we can supply all kinds of metal stock in China,finest price of St52-3N metal plate.
1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,
ST52 3 metallic spherical bar is a kind of low alloy metallic bar, and ST52 3 metal spherical bar is broadly utilized in manufacture of chilly work dies, punches, chilly slicing scissors, drill bushes, gauges, wire drawing dies, coining dies, draw bench boards, drawing dies, thread rolling dies, and so on. Physical Properties Material St 52 3 Density7.85 g/cm3 Melting level °C ( °F)ST52 3 BEBON steelST52 3 steels is a low alloy, excessive energy structural metal which could be readily welded to other weldable metal. DRAWN OVER MANDREL has very little wall variation and no spiraling eccentricity. Prime members enjoy fast & free shipping, limitless streaming of movies and TV shows with Prime Video and many more unique advantages. That is all fantastic and dandy however I was quite disenchanted in the truth that these items are clearly sheared off of a longer rod and no effort to clean up the ends was made.
material number 1.0570
- Any wall variation that may exist within the flat steel runs in the identical aircraft all through the size of the tube, leaving the bore straight and true.
- St52-3N metal plate, under DIN17100 normal St52-3N metal plate, beneath DIN17100 commonplace, we will regard St52-3N metal plate as Carbon and low alloy steel.ASTM A513 – T5 Drawn Over Mandrel ST52.3 – Chicago Tube DRAWN OVER MANDREL has very little wall variation and no spiraling eccentricity.
- With its low carbon equivalent, DIN ST 52-3 N steel possesses good cold-forming properties.
- The tube is shaped and electric resistance welded from flat steel which has very little gauge variation.
ST52-3 steels Powered properties is Yield energy more than 355 MPa, tensile power Mpa. ST52-3 metal plate – BEBON INTERNATIONALST52-3 steels is a low alloy, excessive strength structural metal which can be readily welded to different weldable metal. ST52-3 steels Mechanical properties is Yield strength greater than 355 MPa, tensile power Mpa. HENAN JOIN-WIN IM/EX CORP Will return you with excessive-quality products and full after-sale service with the lowest worth. we dedicated to exceed buyer’s expectation on the premise of quality, price, and delivery.
In order to navigate out of this carousel please use your heading shortcut key to navigate to the subsequent or previous heading. Bebon metal can supply A St 52 steel chemical composition, A St 52 metal mechanical property value and specification ,we are steel suppliers and manufacturer,you can contact us to get A St 52 steel chemical composition, A St 52 steel mechanical property utility and other informations.
HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price