st52-3 steel
st52-3 or st52-3n
1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis
gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate
For every property being compared, the highest bar is ASTM A36 carbon steel and the bottom bar is EN 1.0570 steel. Structural steels and structural steels with improved atmospheric corrosion resistance, scorching rolled. The datasheet beneath exhibits St52 metal yield energy, tensile strength, elongation and impression resistance.
50 spherical bar,24crmo5 equivalent ST52 3 Low Carbon Manganese Steel HillfootST52 3 grade steel is a readily weldable low carbon manganese steel with good influence resistance . This material is commonly equipped in the untreated or normalised condition. Machinability of this material is similar to that of mild metal. DIN St 52 3 N steel plate,St 52 3 N high tensile metal DIN St 52 3 N steel plate,St 52 3 N excessive tensile steel. St 52 3 N metal is a low carbon, high energy structural steel which could be readily welded to other weldable metal.
Transmission towers,Freight vehicles,Railway vehicles,Building buildings, Pipe work,Oil and fuel platforms,Shipbuilding. Both ASTM A36 carbon metal and EN 1.0570 metal are iron alloys. They have a really high ninety nine% of their average alloy composition in common. There are 31 materials properties with values for both supplies.
St52-3 steel supplier, St52-3 steel manufacturer, DIN17100 normal ST52-3 metal. By registering for the Total Materia FREE Trial it is potential to look and think about the property information for over 450,000 alloys as well as discover and compare equal materials from over 69 countries/requirements within the unique, international Total Materia cross reference tables. 1.0570, DIN St52-3, AISI 1024 Mechanical properties,Our manufacturing completely according DIN 17100 ST 52-3 to the 1.0570, DIN St52-3, AISI 1024 requirements to fulfill the 1.0570, DIN St52-3, AISI 1024 mechanical performance, can also in accordance with the customer request, to meet the necessities of customers of 1.0570, DIN St52-3, AISI 1024 mechanical properties. Material St52 steel equal to American ASTM AISI SAE, European standard EN, British commonplace BSI, France commonplace NF, ISO normal, Japanese commonplace JIS, Chinese GB standard and Indian IS normal.
1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,
DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:
DIN |
ASTM |
EN |
JIS |
Chemical Composition |
C.E. |
||||||||||
C |
Si |
Mn |
Cr |
Mo |
Ni |
V |
W |
S |
P |
CU |
|||||
17100 St52-3N |
A572-50 |
10025-2:2004 S355J2+N |
G3106 SM490YB |
max 0.22 |
max 0.55 |
max 1.60 |
– |
– |
– |
– |
– |
max 0.035 |
max 0.035 |
– |
max 0.047 |
St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (product analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.065 |
0.065 |
– |
≤ 30 |
Fully Killded |
|
0.24 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.045 |
0.045 |
– |
≤ 30 |
||
0.24 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.22 |
0.60 |
1.70 |
0.035 |
0.035 |
– |
0.60 |
≤ 30 |
||
0.24 |
30 <d ≤100 |
St52-3 Steel Properties
Physical Properties
- Material St 52-3 Density: 7.85 g/cm3
- Melting point: 1420-1460 °C (2590-2660 °F)
DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate
Thickness (mm) |
Yield Strength Reh min (N / mm2) |
Tensile Strength Rm min (N / mm2) |
Elongation A5 min (%) |
Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm. |
3<thk<100 |
315-355 |
490-630 |
max 22 |
27 Joules at -20 C |
St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (ladle analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.040 |
0.040 |
– |
≤ 30 |
Fully Killded |
|
0.22 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.035 |
0.035 |
– |
≤ 30 |
||
0.22 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.20 |
0.55 |
1.60 |
0.025 |
0.025 |
– |
0.55 |
≤ 30 |
||
0.22 |
30 <d ≤100 |
DIN17100 ST52-3 EQUIVALENT STEEL GRADES
EN 10025 – 2 |
EN 10025+A1 |
?SN |
DIN 17100 |
||
EN10027-1 |
EN10027-2 |
EN10027-1 Grade |
EN10027-2 Grade |
|
|
S235JR2 |
1.0038 |
S235JRG2 |
1.0038 |
11375 |
RSt 37-2 |
S235J0 |
1.0114 |
S235J0 |
1.0114 |
11378 |
St 37-3U |
|
– |
S235J2GR3 |
1.0116 |
11378 |
St 37-3N |
S235J2 |
1.0117 |
S235J2G4 |
1.0117 |
– |
– |
S275JR |
1.0044 |
S275JR |
1.0044 |
11443 |
St 44-2 |
S275J0 |
1.0143 |
S275J0 |
1.0143 |
11445 |
St 44-3U |
|
– |
S275J2GR3 |
1.0144 |
11448 |
St 44-3N |
S275J2 |
1.0145 |
S275J2G4 |
1.0145 |
– |
– |
S355JR |
1.0045 |
S355JR |
1.0045 |
11523 |
St 52-3 |
S355J0 |
1.0553 |
S355J0 |
1.0553 |
11523 |
St 52-3U |
|
– |
S355J2G3 |
1.057 |
11503 |
St 52-3N |
S355J2 |
1.0577 |
S355J2G4 |
1.0577 |
– |
– |
Material St 52-3 Datasheet – 3
Yield strength (≥ N/mm2); Thickness (d) mm |
||||||
Steel (Steel number) |
d≤16 |
16< d ≤40 |
40< d ≤63 |
63< d ≤80 |
80< d ≤100 |
>100 |
St52-3 |
355 |
345 |
335 |
325 |
315 |
by agreement |
Tensile Strength
Material St 52-3 Datasheet – 4
Tensile strength (≥ N/mm2); Thickness (d) mm |
|||
Steel (Steel number) |
d<3 |
3 ≤ d ≤ 100 |
>100 |
St 52-3 |
515-680 |
490-630 |
by agreement |
Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
0.5 ≤d <1 |
1≤ d <1,5 |
1,5≤ d <2 |
2≤ d <2,5 |
2,5≤ d <3 |
|||
St52-3U |
14 |
15 |
16 |
17 |
18 |
|||
St52-3N |
12 |
13 |
14 |
15 |
16 |
|||
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
3 ≤d ≤40 |
40< d ≤63 |
63 < d ≤100 |
>100 |
||||
St52-3 |
22 |
21 |
20 |
by agreement |
||||
St52-3N |
20 |
19 |
18 |
ST52 3 steel has many applications.Generally ST52 3 steels is used for Machinery elements, cellular equipment, crane, growth, chassis, buildings, bridges and most structural activities. Sterlite Metal Industries is a professional ST52 3 steel exporter and a metal Stockist in india. No, what Bosley is saying is precisely appropriate, for nearly all steels the modulus of elasticity is identical, and it is only part thickness that can change how a lot it deflects under load . Some alloys can barely change the worth , nevertheless it’s too small to contemplate usually. A 10 inch part of via-hardened S6 flexes under a butterfly’s weight.
50 spherical bar,24crmo5 equivalent St 52.3 Round Bar, St52 3 Steel Bar, St52 3 Steel Rod MaterialGet ST 52.3 Round Bars inventory, See din st52 3 equivalent, st 52.3 chemical composition online. ST52 3 material or mechanical properties, ST 52.3 material is a low alloy, excessive energy bodily metal which can be freely welded to different wieldable steel. ST52 3 steels Powered properties is Yield energy greater than 355 MPa, tensile power Mpa. It Provides Steel And Construction Related Companies In The Middle East Information, News And An Extensive Interactive Database, Inclusive Offers And Inquiries.DIN17100 ST52 3,ST52 3N Steel plate supplier Steel Is a 2062 A e250?
- Transmission towers,Freight cars,Railway vans,Building buildings, Pipe work,Oil and gasoline platforms,Shipbuilding.
- Both ASTM A36 carbon steel and EN 1.0570 steel are iron alloys.
- They have a really excessive ninety nine% of their average alloy composition in widespread.
- There are 31 material properties with values for each supplies.
- DIN St37 2 Steel (1.0037 Material) St37 2 metal (1.0037 material) is an unalloyed structural steel grade complies with DIN and has been discarded since 2004.
- Properties with values for only one materials usually are not proven.
The St 52 material datasheet and specification such as chemical composition, properties and equivalents could be found within the following tables. The following tables present St52 chemical composition. St52 steel data sheet 1, Chemical composition in accordance with DIN and DIN EN .DIN ST52 3 steel plate SupplierIs a 2062 A e250? st52 pipe chemical composition, din pdf,din st 52 3 n,gs 52.3 chemical composition,din pdf,st52 3n equivalent grade,st52 metal tube,1.0570 equal,din steel grade,s355j2 round bar astm equivalent,st52 hardness hrc,st52.3 vs 1026,st52 steel pipe,st52.3 tubing,a572 gr.
st52-3 g
HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price