Abrasion-resistant steel plate is a product family of wear-resistant plates, usually supplied in the quenched-and-tempered condition and ordered by a hardness class rather than by a single tensile grade. It is not one ASTM or EN chemical type. Common designations include commercial AR classes such as AR400, AR450 and AR500, and the NM400, NM450 and NM500 grades of GB/T 24186. There is no official Gangsteel product-page hub for this family in this rewrite stream, so the figures below are labeled compilations without a product-page link.

Abrasion-Resistant Steel Plate — Hardness Classes

Designation Nominal hardness class Widely published hardness window Basis / conditions
AR400 400 HBW class Typically around 360–440 HBW Common commercial supply window, not a single ASTM requirement
AR450 450 HBW class Typically around 420–480 HBW Common commercial supply window, not a single ASTM requirement
AR500 500 HBW class Typically around 470–530 HBW Common commercial supply window, not a single ASTM requirement
NM400 400 HBW class 370–430 HBW Widely published GB/T 24186 hardness window; confirm the ordered edition
NM450 450 HBW class 420–480 HBW Widely published GB/T 24186 hardness window; confirm the ordered edition
NM500 500 HBW class 470–530 HBW Widely published GB/T 24186 hardness window; confirm the ordered edition

Chemistry, tensile minima and Charpy values, when required, are those of the ordered standard or mill specification. They are not the same for every abrasion-resistant steel plate and are not invented as a single family chemistry here. Hardness is the usual acceptance property; do not convert tensile strength into hardness and then use that conversion as an acceptance limit.

Frequently Asked Questions (FAQ)

What is abrasion-resistant steel plate?

It is wear-resistant plate, typically quenched and tempered, ordered by a hardness class such as AR500 or NM450 rather than by one universal chemical grade.

Is there one specified chemistry for abrasion-resistant steel plate?

No. Commercial AR classes do not share a single ASTM chemistry. NM grades follow the chemical limits of the ordered GB/T 24186 edition, which differ by grade.

Is AR500 the same product as all abrasion-resistant steel plate?

No. AR500 is one commercial 500 HBW-class designation within the family. NM450, AR400 and other classes are different hardness (and, for NM grades, different specified) products.

For abrasion-resistant steel plate, Please contact Gangsteel with the designation, standard or mill grade, hardness class, dimensions, quantity and any supplementary requirements. Learn more about plate products at Gangsteel.

Abrasion-Resistant Steel Plate
Tagged on: