S690q S355 Marine Steel Plate With 50mm Thickness

S690Q Standard: EN 10025-6:2004, European standard for hot-rolled structural steel. Part 6 – Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Gangsteel produced and export EN10025-6 high strength S690Q steel plate, We had min 1000tons stock for high strength S690Q equal grade and we also provide the cutting service with cnc, water cutting or laser cutting. Related keywords:en s690q,en 10025 s690ql,en 10025-6 s690q,en 10137 2 grade s690q,en 10025-6 s690ql equivalent astm,s690ql en 10025,s690q en 10025-6,en 10025 s690ql1,s690q en 10137-2,en 10137-2 s690ql,s690ql en 10025-6,en 10025 s690q,en 10025 steel,en 10025-s355j2men 10025-2 s355jr,en 10025 astm equivalent,en 10025-6 s690ql,en 10025 s690ql,en 10025 steel equivalent,en 10025 s355k2g4,en 10025-6 s690ql equivalent astm,en 10025-6 s690q,bs en 10025-6-s690ql,acero en 10025-6 s690ql,en 10025 s690ql1,en 10025 p 6 2004 s690ql,en 10025-1 equivalent,ss-en 10025-6 s690ql and en 10025-6 grade s690ql.

We are mega distributors of S690QL1 structural steel plates, in India and overseas countries. • Pressure vessels like fastened and conveyable storage tanks, vessels, and so forth. use RQT 701, NAXTRA seven-hundred structural metal plates as a result of they are malleable easily, create slim assemblies, save space and comprise fixed machining, essential in powerful systems. We create S690QL1 structural steel plates not solely in Stainless Steel but in addition with components like Nickel, Alloy and Manganese to increase total utility of the plates.

无标题文档

S690Q is stunning yield quality real steels review in the quenched and tempered. The picture S is relating steel, 690 for the base yield quality in thickness under 50mm.The Symbol Q mean the vehicle condition in secured and tempered. S690q could be through the 20-temperature impact and the significance is 30J.Definition of BS7608 fatigue classes for structural steels Concerning the oxy fuel cutting, the Loga mean test values of S355M and S690Q are lower than the corresponding Loga limit values obtained for the design class B, so class B cannot be applied strictly to S355M and S690Q with oxy fuel cut edges. Consequently, the analysis followed here provides the same fatigue class for oxy fuel cut straight Down Loadstone Supplier.Gangsteel supply high strength steel plates in S690Q,S690QL,S690QL1,S890Q,S960Q,S890QL
Equivalent Grades of EN 10025–6:2004 S690QL Steel Plate

Grade

Standards

Country

S690QL EN10137-2 EN10025-6:2004

EN

EUROPE

A709-100

ASTM

USA

TStE690V DILLIMAX 690 NAXTRA 70

DIN, WNr

GERMANY

E690T E690TFP S690T

AFNOR/ NF A36- 204

FRANCE

FeE690VKT

EN

EUROPEAN (OLD)

2625 WELDOX 700

SS

SWEDON

E690

ISO 4952

INTER

JFE HITEN 780LE

JIS

JAPAN

ALFORM 700

AUSTRIA

mechanical properties of grade EN10025-6 S690Q

 

Minimum yield strength – ReH
MPa

Tensile strength Rm
MPa

Minimum elongation – A
Lo = 5,65* √So (%)

Steel grade

Nominal thickness
mm

Nominal thickness
mm

 

>3
≤50

>50
≤100

>100
≤150

>3
≤50

>50
≤100

>100
≤150

S690Q

690

650

630

770-940

760-930

710-900

14

EN10025-6 Notch impact test.
Notch impact test – longitudinal. Minimum values of impact energy for impact tests on longitudinal V-notch test pieces for quenched and tempered steel

EN10025 S690Q Structural Steel. EN10025:6:2004 Hot Rolled S690Q, Steel Number 1.8928. 690 N/MM 2 high yield, high strength structural steel plate notch impact tested in longitudinal direction to the rolling direction at 40degree C, thus being excellent in forming and Pharmacia ita welding properties that achieve another higher level of beauty and durability in steel engineering structure. Steel Plate 2.25Cr1Mo0.25V(H) S690QSteel Plate 2.25Cr1Mo0.25V(H) Category Pressure Vessel and Boiler Steel Plate ModelWYJ046 2006 Standard Specification is for boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall comply with SA20/SA20M.Optimal welding technology of high strength steel S690Q For the S690Q L steel, the recommended . preheating temperature should be 150

Temperature
°C

-20

0

Min. absorbed energy
J

40

50

Notch impact test – transverse. Minimum values of impact energy for impact tests on transverse V-notch test pieces for quenched and tempered steel, when the impact test on transverse test pieces is agreed at the time of the order.

Temperature
°C

-40

-20

0

Min. absorbed energy
J

27

30

35

The tables below show the chemical composition of grade EN10025-6 S690Q

 

Ladle analysis.
Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified properties.
Nb, Ti, V, Zr shall be at least 0,015 % of a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0,015 % applies to soluble aluminum, this value is regarded as attained if the total aluminum content is at least 0,018 %; in case of dispute the soluble aluminum content shall be determined.

Steel grade

C
max.
%

Mn
max.
%

Si
max.
%

P
max.
%

S
max.
%

B
max.
%

Nb
max.
%

V
max.
%

Ti
max.
%

Cr
max.
%

Mo
max.
%

Ni
max.
%

Cu
max.
%

Mo
max.
%

N
max.
%

Zr
max.
%

CEV
max. %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≤50

>50
≤100

>100
≤150

S690QL

0,20

1,70

0,80

0,020

0,010

0,005

0,06

0,12

0,05

1,50

0,70

2,0

0,50

0,70

0,015

0,15

0,65

0,77

0,83

 

EN10025-6 S690Q Steel Grade Equivalent Table

European old
EU 137 (1983)

France
AFNOR

Sweden
SS

Germany
DIN,WNr

FeE 690 V KT

E690T

2625

TStE690V

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

This method of cooling, generally known as quenching, induces a transformation within the crystalline construction of the metal which leaves it a lot tougher. Unfortunately the metal on this condition can also be very brittle and it isn’t possible to use it in many applications. A method of heat therapy for alleviating this downside is called tempering and requires the quenched steel to be re-heated although this time to below the lower critical temperature. The result’s to place toughness and ductility back in to the metal and, although a few of the yield power of the quenched steel is lost, the top result of the quenching and tempering process is to produce a powerful metal which is also easy to weld, bend, and fabricate typically. S355JR steel has the right tensile energy, good toughness, plasticity, processing property, be rolled into steel plates, shaped metal and profile metal, which normally used to build workshop, bridge, vessels and so on.

The metal is designed to offer wonderful welding and bending properties and it presents substantial possibilities for financial savings in materials prices, processing and handing. Due to its excessive strength, it permits design of lighter, more durable and environment friendly merchandise and structures. ASTM A633 alloy steel plate Super thickness Steel plateA633 Grade AA633 Grade CA633 Grade DA633 Grade EASTM A633 specification is normalized low alloy high strength metal plates A633 Grade A, A633 Grade C, A633 Grade D, A633 Grade E. Owing to our expertise and experience in S690QL1 structural steel plates, we are suppliers of high quality, dent – free structural steel plates to quite a lot of industries. We inventory an unlimited quantity of our merchandise at our storehouse in Mumbai, because the stockist, catering to every industry want with utmost precision and customization of plates.

En10025 6 S620ql Plate, S620ql High Strength Steel, S620ql

Heat analysis shall be used to find out the required chemical composition for carbon, manganese, phosphorus, sulfur, nickel, chromium, molybdenum, copper, columbium, and titanium. Yield power, tensile energy, and elongation shall be evaluated utilizing tension test and the required toughness shall be evaluated using notch toughness check EN10025-6 S690Q steel plate supplier. As the process of quenching and tempered has been improved and refined, carbon steel plates produced this manner have become stronger and it’s not unusual now to find plates with strengths of more that 1100 MPa which is 4 occasions stronger than primary structural metal.

Best 2019 Best Price En S500ql1 Steel Material,Carbon

ultra EN 10025-6 S690Q strength steel 1500 mpa

DIN EN S690Q /S690QL/S690QL1 Condition of Delivery Water quenched and tempered. Typical Applications Heavy road vehicleschassis, dumper bodies. Cranes constructionbooms of mobile cranes. Structural steelworksbridges, bridge components, components for offshore structures. Pressure vesselsfixed and transportable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature suitable for heavy engineering works. Plus, it has good formability and weldability property. Plates are both magnetic and non magnetic in nature. It serves good resistivity towards crevice and pitting cracking subjected to impact loads.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally certified industry Rexton steel & alloys are busy in supplying the excellent and desirable quality of S690QL PLATES globally. They are fully focusing on offering clients with the top notch quality of plates and other essential services.

S690Q steel is used in structures subject to extreme loadsmining and heavy construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.Plates of S690Q steel grade MetinvestS690Q structural high strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025 6 standard.S690Q / 1.8931 SteelNumber Chemical composition S690Q Number1.8931 ClassificationAlloy special steel with specified minimum values of impact energy at temperatures not lower than 20 °C StandardEN 10025 62004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Weldox Seven-Hundred Steel Plate

S960QL is a High Yield Strength Structural Steel within the quenched and tempered situation which gives the material wonderful energy. S960QL is a structural metal grade with a good greater yield energy than S890QLWeldox 960 meets the necessities of EN for the corresponding grades. S960Ql is a excessive strength quenched and tempered, fantastic grained structural steel with a minimum yield power of 960 MPa in its supply condition ex works. Its mechanical properties are achieved by water quenching adopted by tempering.Weldox 960 is a high strength metal that gives a unique combination of energy and toughness along with first-fee workshop properties. It is meant for load carrying structures with high demand on low weight.

Strenx® is stronger than ordinary steel, you want much less material to achieve equal strengths in your products. RQT steels could be reduce satisfactorily using typical oxy-fuel gas practices, in lots of cases without the necessity for preheat, as long as cutting procedures keep in mind plate thicknesses and carbon equivalent values.

Known as Dillimax 690E it’s further tough with minimum influence values down to -60 oC. S690QL1 has the steel number 1.8988 based on EN and is available on an ex-inventory basis in thicknesses from 6 mm to 250 mm.

As a outcome to that our export account right now is in various countries like Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt.We welcome your inquiries. EN Super thickness Steel plateS235JRS235J0S235J2S275JRS275J0S275J2S355JRS355J0S355J2S355K2S450J0S355J2G3EN specification is non-alloy structural steel plate, covers S235JR, S235J0, S235J2, S355JR, S355J0, S355K2, S450J0. The fusion zone is especially composed of acicular ferrite and lath martensite while the microstructure of the welded bead consists of acicular ferrite and a small quantity of granular bainite.

  • With higher mechanical strength as by no means earlier than, our structural metal plates, also called EN S690Q, we develop metal plates with enhanced toughness and minimal impact.
  • These s690q metal plate are manufactured using most interesting grade uncooked material available to ensure worldwide quality.
  • ASTM A514 alloy metal plate is known for its excessive yield strength, weldability, and toughness, even at low temperatures.
  • To stop cold cracking in the welded joints only welding consumables giving welds of very low hydrogen content should be used.a283 grade c metal sheet for railway application gradeS620QL steel coils dealerBebon Steel high metal ASME, ASTM SA573 Grade fifty eight steel coil software.
  • The materials DIN/EN-S620QL and its material properties can be considered right here on this web page.

Conquest Steel and Alloys, the suppliers of Stainless Steel plates, offer a broad range of S690QL1 Steel Plates, a longtime juggernaut in bearing acute hundreds and opposing abrasive erosion. With greater mechanical energy as never before, our structural metal plates, also called EN S690Q, we develop steel plates with enhanced toughness and minimum influence. The materials DIN/EN-S620QL and its material properties could be considered here on this page.

Our S690Q is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025 6 Plates have good forming and welding properties. S690Q plates have higher payload capacity and are energy efficient, hence can be used in leaner structures.S690Q / 1.8928 SteelNumber Chemical composition Nominal thickness = 50(mm) CEV max = 0.65 Nominal thickness from 50 to 100 (mm) CEV max = 0.77 Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specified propertiesEN 10025 S690QL Brown McFarlaneHigh strength quenched and tempered steel plate can be easily welded and fabricated. We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described asHigh Strength Quenched and Tempered Steel Plate. If you have requirement for high strength steel plate,please contact us by email.

ultra EN 10025-6 S690Q strength steel 1500 mpa
Tagged on: