st52-3 iso
1.0570 Material,St52-3 Steel Equivalent,st52-3,st52.3,st52.3n,st 52-3 n,st52-3n,st52-3 material,st52-3 equivalent,st52-3 equivalent grade,st 52-3 neue bezeichnung,st52-3k,st52-3 chemical composition,steel st52-3,st52.3 steel,st52-3 material equivalent,st52-3 steel,st52-3 datenblatt,st52-3 equivalent in indian standard,st52-3 steel equivalent,steel st52-3 equivalent,st52-3 material properties,st52-3 grade specification,1.0570 st 52-3,st52-3 odpowiednik,din st52-3,din st52.3,st52-3 werkstoffnummer,st52-3n material properties,st52-3n material,st52-3 u,st52-3 steel plate,st52.3 tube,werkstoff st52-3,st52-3 material specification,st52-3 tube,st52-3 eigenschappen,st52-3 equivalent sae,st52-3 plate,st52-3 steel equivalent astm,st52-3 steel chemical composition,st52-3 hardness,st52-3 jis
gangsteel produced and exported DIN 1.0570 and ST 52-3 steel plate as common carbon structural steel. Gangsteel supply DIN17100 ST52-3 ST52-3N Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier.ST 52-3 steel plate is one mainly of Carbon structural steel, ST 52-3 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.
If you have any requirement for ST 52-3 structure steel plate,under DIN17100 standard ST 52-3 steel plate, under DIN17100 standard, please contact us.
1.Steel Grade : ST 52-3 (1.0570)
2. Standard: DIN 17100 steels for general structural purposes
3. Approval By Third Party :ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE
4. Classification: General structural purposes
5. Product form : super heavy steel plate
1.0570 datenblatt
However, in situations producing severe metallic-to-metallic wear , the best resolution is to separate the two metallic surfaces. This may involve a lubricant, or commonly a non-metallic coating .
What is ASME and ASTM?
The American Society for Testing and Materials (ASTM) issues standards on material properties and testing. The American Society of Mechanical Engineers (ASME), meanwhile, specifies standards for materials to be used in construction and infrastructure.
For example, some tooling fails due to abrasive wear, during which the material being cut wears down the software floor, though this sort of failure is slow to happen and may be anticipated. A device that has turn into worn to failure needs a software metal with larger wear resistance. The maximum sensible restrict to the quantity of carbide-forming components which may be added to a steel for put on properties is dependent upon the flexibility to maintain a reasonable distribution of those carbides throughout the steel’s microstructure. When steels are manufactured, they’re melted in massive batches, containing the specified chemical composition. The batches are poured into ingot molds, and solidify into castings that are subsequently cast or rolled into bars.
Different tool steels are used at related hardnesses, yet supply important variations in expected wear life. Thus, hardness just isn’t usually a major think about put on resistance, solely in deformation resistance.
- (The toughness of carbide supplies is often measured in inch-kilos, where software steels are measured in foot-pounds.) Within the households of device steels, there is some variation in impression resistance.
- A9 is usually tempered at over 900 F, and thus could also be coated by any of the frequent industrial coating processes.
- In basic, software steels, even these with low impression toughness, are many times more durable than solid carbide.
- Shock-resisting steels, like S7 and A9, are both designed to supply optimum resistance to breakage.
1.0570 und 1.0577,1.0570 rohr,1.0570 jis,1.0570+c,1.0570 din,1.0570 c45,1.0570 china,steel 1.0570 chemical composition,1.0570 material chemical composition,1.0570 density,din 1.0570 equivalent astm,en 1.0570 equivalent,en 1.0570 properties,s355j2g3 (1.0570) en 10025,1.0570 equivalent jis,din 1.0570 equivalent,din 1.0570 steel,1.0570 material composition,din 1.0570 chemical composition,1.0570+ar,1.0570 equivalent astm material,1.0570 aisi,1.0570 acciaio,1.0570 en 10025,1.0570 material equivalent in india,acero 1.0570 equivalencia,1.0570 bar,1.0570 bestellen,blacha 1.0570,1.0570 bruchdehnung,1.0570 bezeichnung,baustahl 1.0570,e-modul 1.0570,1.0570 fräsen,1.0570 in astm,was ist 1.0570,1.0570 härte hrc,1.0570 h9,1.0570 hrc,1.0570 hot rolled and normalized,jakost 1.0570,1.0570 kerbschlag,1.0570 material specification,1.0570 material density,1.0570 lieferant,1.0570 korrosion,1.0570 kaufen,1.0570 kosten,1.0570 härte,1.0570 heat treatment,1.0570 equivalent grade,steel grade 1.0570 equivalent,1.0570 festigkeit,präzi flachstahl 1.0570,1.0570 geschmiedet,1.0570 gewicht,gatunek 1.0570,1.0570 hardness,1.0570 glühen,1.0570 geschliffen,1.0570 gefüge,1.0570 material spec,
st52-3 astm
Conversely, steels chosen for their resistance to impact or breakage may not be capable of excessive wear resistance. An understanding of those device steel properties and associated issues permits number of the optimum metal for many functions. Keep in thoughts, nonetheless, that device metal properties aren’t instantly associated to each other, so for instance, you could need to sacrifice toughness for larger wear resistance.
An understanding of those properties, combined with an understanding of what components limit software life for a specific device (breakage, wear, deformation, and so on.), will enable software users to specify the best performing grade for almost any software. Tool customers can examine failed instruments to find out which property may have been missing in a software, or which properties ought to be improved, and what other properties must be considered in alternate supplies with the required improved properties. Hardness and toughness could also DIN 17100 ST 52-3 be thought of “step” or “threshold” capabilities; that’s, so long as the property is high enough to stop injury , there isn’t any additional benefit to rising the property even larger. However, put on resistance may be considered a “continuous” function; that’s, continual will increase within the wear resistance of the steel will lead to increases within the lifetime of the tool.
The CPM grades present glorious substrates for all sorts of floor remedies. For tools requiring excessive resistance to plastic deformation, hardness must be a priority.
DIN17100 ST52-3 ST52-3N Steel plate Chemical composition of heat analysis:
DIN |
ASTM |
EN |
JIS |
Chemical Composition |
C.E. |
||||||||||
C |
Si |
Mn |
Cr |
Mo |
Ni |
V |
W |
S |
P |
CU |
|||||
17100 St52-3N |
A572-50 |
10025-2:2004 S355J2+N |
G3106 SM490YB |
max 0.22 |
max 0.55 |
max 1.60 |
– |
– |
– |
– |
– |
max 0.035 |
max 0.035 |
– |
max 0.047 |
St52-3 steel data sheet – 2, Chemical composition (product analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (product analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.065 |
0.065 |
– |
≤ 30 |
Fully Killded |
|
0.24 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.22 |
0.60 |
1.70 |
0.045 |
0.045 |
– |
≤ 30 |
||
0.24 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.22 |
0.60 |
1.70 |
0.035 |
0.035 |
– |
0.60 |
≤ 30 |
||
0.24 |
30 <d ≤100 |
St52-3 Steel Properties
Physical Properties
- Material St 52-3 Density: 7.85 g/cm3
- Melting point: 1420-1460 °C (2590-2660 °F)
DIN17100 ST52-3 ST52-3N Steel plate mechanical properties steel plate
Thickness (mm) |
Yield Strength Reh min (N / mm2) |
Tensile Strength Rm min (N / mm2) |
Elongation A5 min (%) |
Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm. |
3<thk<100 |
315-355 |
490-630 |
max 22 |
27 Joules at -20 C |
St52-3 steel data sheet – 1, Chemical composition (ladle analysis) according to DIN 17100 and DIN EN 10025: 1993.
Chemical Composition (ladle analysis), %, ≤ |
|||||||||||
Country (Region) |
Standard |
Steel Grade (Steel number) |
C |
Si |
Mn |
P |
S |
N |
Cu |
Thickness (d) (mm) |
Method of deoxidation |
Germany |
DIN 17100: 1980 |
St52-3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.040 |
0.040 |
– |
≤ 30 |
Fully Killded |
|
0.22 |
30 <d ≤100 |
||||||||||
European Union |
EN 10025: 1993 |
S355J2G3 (1.0570) |
0.20 |
0.55 |
1.60 |
0.035 |
0.035 |
– |
≤ 30 |
||
0.22 |
30 <d ≤100 |
||||||||||
EN 10025-2: 2004 |
S355J2 (1.0577) |
0.20 |
0.55 |
1.60 |
0.025 |
0.025 |
– |
0.55 |
≤ 30 |
||
0.22 |
30 <d ≤100 |
DIN17100 ST52-3 EQUIVALENT STEEL GRADES
EN 10025 – 2 |
EN 10025+A1 |
?SN |
DIN 17100 |
||
EN10027-1 |
EN10027-2 |
EN10027-1 Grade |
EN10027-2 Grade |
|
|
S235JR2 |
1.0038 |
S235JRG2 |
1.0038 |
11375 |
RSt 37-2 |
S235J0 |
1.0114 |
S235J0 |
1.0114 |
11378 |
St 37-3U |
|
– |
S235J2GR3 |
1.0116 |
11378 |
St 37-3N |
S235J2 |
1.0117 |
S235J2G4 |
1.0117 |
– |
– |
S275JR |
1.0044 |
S275JR |
1.0044 |
11443 |
St 44-2 |
S275J0 |
1.0143 |
S275J0 |
1.0143 |
11445 |
St 44-3U |
|
– |
S275J2GR3 |
1.0144 |
11448 |
St 44-3N |
S275J2 |
1.0145 |
S275J2G4 |
1.0145 |
– |
– |
S355JR |
1.0045 |
S355JR |
1.0045 |
11523 |
St 52-3 |
S355J0 |
1.0553 |
S355J0 |
1.0553 |
11523 |
St 52-3U |
|
– |
S355J2G3 |
1.057 |
11503 |
St 52-3N |
S355J2 |
1.0577 |
S355J2G4 |
1.0577 |
– |
– |
Material St 52-3 Datasheet – 3
Yield strength (≥ N/mm2); Thickness (d) mm |
||||||
Steel (Steel number) |
d≤16 |
16< d ≤40 |
40< d ≤63 |
63< d ≤80 |
80< d ≤100 |
>100 |
St52-3 |
355 |
345 |
335 |
325 |
315 |
by agreement |
Tensile Strength
Material St 52-3 Datasheet – 4
Tensile strength (≥ N/mm2); Thickness (d) mm |
|||
Steel (Steel number) |
d<3 |
3 ≤ d ≤ 100 |
>100 |
St 52-3 |
515-680 |
490-630 |
by agreement |
Note: 1MPa = 1N/mm2
Elongation
Material St 52-3 Datasheet – 5
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
0.5 ≤d <1 |
1≤ d <1,5 |
1,5≤ d <2 |
2≤ d <2,5 |
2,5≤ d <3 |
|||
St52-3U |
14 |
15 |
16 |
17 |
18 |
|||
St52-3N |
12 |
13 |
14 |
15 |
16 |
|||
Elongation (≥, %); Thickness (d), mm |
||||||||
Steel (Steel number) |
3 ≤d ≤40 |
40< d ≤63 |
63 < d ≤100 |
>100 |
||||
St52-3 |
22 |
21 |
20 |
by agreement |
||||
St52-3N |
20 |
19 |
18 |
They exhibit good hardness, abrasion resistance, and deformation resistance. Most software steels are notch-delicate, which means that any small notch current within the pattern will allow it to fracture at a much lower power.
HENAN GANG IRON AND STEEL CO.LTD is a professional super steel plates/sheets manufacture and supplier. We can supply different product type of ST37-2,Ust 37-2 , Rst37-2, ST44-2, ST44-3, ST52-3, ST50-2, ST60-2, ST70-2 .If you have any need of DIN 17100 super heavy steel plate please do not hesitate to contact us .Check St 52.3 Steel Equivalent And Material, Find St52 3 Steel Round Bar Price