EN 10025-6 S500Q carbon steel plate manufacturers in europe

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

conditioning warmth remedy, n–a preliminary heat treatment used to arrange a metal object for a desired response to a subsequent warmth therapy. steady-conveyance furnace, n–a heating device through which steel objects are deliberately moved at a continuing price through the thermal processing cycle. managed cooling, n–cooling a metal object from an elevated temperature in a predetermined manner to keep away from hardening, cracking, or inner damage, or to produce a desired microstructure or mechanical properties. core, n–in case hardening, the inside portion of unaltered composition or microstructure, or both, of a case hardened metal object. core, n–in clad merchandise, the central portion of a multilayer composite metallic materials. critical cooling fee, n–the slowest fee of continuous cooling at which austenite can be cooled from above the transformation vary to prevent its transformation above M s.

• maraging, n—a precipitation hardening treatment utilized to a particular group of alloy steels to precipitate one or more intermetallic compounds in a matrix of basically carbonfree martensite.
• isothermal annealing, n—austenitizing a metal object and then cooling it to, and holding it at, a temperature at which austenite transforms to a ferrite-carbide mixture.
• being quenched is faraway from the quenching medium whereas the thing is at a temperature substantially higher than that of the quenching medium.

EN10025-6 S500Q 1.8924 carbon steel 1020 plate

precipitation hardening, n–hardening caused by the precipitation of a constituent from a supersaturated strong answer. precipitation heat therapy, n–artificial growing older by which a constituent precipitates from a supersaturated strong solution.

EN 10025-6 S500Q carbon plate steel products llc

The SAE system uses a basic 4-digit system to designate the chemical composition of carbon and alloy steels. Throughout the system, the final two digits give the carbon content in hundredths of a percent. For example, a carbon metal containing 0.45 % carbon is designated 1045 on this system. Resulfurized carbon steels are designated within the series 11XX, resulfurized and rephosphorized carbon steels 12XX and steels having manganese contents between 0.9 and 1.5 %, but no other alloying elements are designated 15XX. Composition ranges for manganese and silicon and most percentages for sulfur and phosphorus are additionally specified. For alloy steels, the first two digits of the SAE system describe the major alloying elements current in the material, the first digit giving the alloy group. For example the 43XX sequence steels comprise 1.sixty five–2.00 % Ni, 0.50–0.eighty % Cr and 0.20–0.30 % Mo, together with composition ranges for manganese and silicon and maximums for sulfur and phosphorus.

As a outcome, these seven bearing steels within these two requirements are not equal, but are comparable. EN Grade P500QL1 Steel Sheet/Plate Suppliers, Buy p460ql2 knowledge sheet EN Gr.P500QL1 Plate Manufacturers, Suppliers – EN Grade P500QL1 Steel Plate for Pressure Vessels and Boilers in thk 6MM to 300MM. Establish reliable relationship between buyers and suppliers through our matching providers and find new enterprise opportunities through varied on-line exhibitions.

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition

Grade	C %	Si %	Mn %	P %	S %	N %	B %	Cr %
S500Q	0.200	0.800	1.700	0.025	0.015	0.015	0.005	1.500
	Cu %	Mo %	Nb %	Ni %	Ti %	V %	Zr %
	0.500	0.700	0.060	2.000	0.050	0.120	0.150

 

What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

Grade	Thickness	Min Yield (Mpa)	Tensile (MPa)	Elongation (%)	Min Impact Energy
S500Q	8mm-50mm	Min 500Mpa	590-770Mpa	17%	-20	Min 27J
	51mm-100mm	Min 480Mpa	590-770Mpa	17%	-20	Min 27J
	101mm-150mm	Min 440Mpa	540-720Mpa	17%	-20	Min 27J

 

(Obviously gold is not going to be used in the identical “tonnages’’ as scorching-rolled steel.) Different standardizing groups use completely different standards to outline the standing that a cloth has to achieve before a standard number will be assigned to it. A UNS number won’t ordinarily be issued for a cloth that has simply been conceived or that’s nonetheless in only experimental trial. A 941 – 03 process annealing, n—within the sheet and wire industries, heating a steel object to a temperature near, but beneath, Ac1 and then cooling it, to be able to soften it for additional chilly working. progressive growing older, n—aging by growing the temperature in steps, or continuously, during the getting older cycle. quench getting older, n—growing older associated with quenching after resolution heat therapy. quench annealing, n—annealing an austenitic metal object by solution heat treatment.

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

There had been actually tons of, if no more than a thousand, such choices made in this handbook. In these cases, the closest match comparability decisions had been made at the discretion of the editor. Description of Numbers Established for Metals and Alloys 2.1 The unified numbering system establishes 18 sequence of numbers for metals and alloys, as proven in Table 1. In most instances the letter is suggestive of the household of metals recognized; for example, A for aluminum, P for valuable metals, and S for stainless steels. 2.2 Whereas a number of the digits in certain UNS number teams have special assigned meaning, every series is impartial of the others in such significance; this apply permits greater flexibility and avoids difficult and lengthy UNS numbers. NOTE 4—This arrangement of alphanumeric six-character numbers is a compromise between the pondering that identification numbers should point out many traits of the fabric, and the idea that numbers must be short and uncomplicated to be broadly accepted and used.

Our in-home logistics groups are experts in consolidating supplies from a number of sources, arranging a number of packaging and making certain that goods arrive on time, in excellent condition and on the desired destinations, wherever that is on the earth. These teams regularly handle manufacturing, processing, high quality assurance, inspection, documentary requirements and customs clearance formalities. Scope 1.1 This follow covers a unified numbering system for metals and alloys which have a “industrial standing” , and covers the process by which such numbers are assigned. Section 2 describes the system of alphanumeric designations or “numbers” established for every household of metals and alloys. Section 4 describes the process for requesting number project to metals and alloys for which UNS numbers have not beforehand been assigned. NOTE 1—UNS designations shall not be used for metals and alloys that are not registered beneath the system described herein, or for any steel or alloy whose composition differs from those registered. NOTE 2—The phrases “business standing,’’ “manufacturing utilization,’’ and others are meant to portray a material in active industrial use, though the actual quantity of such use will depend, among different issues, upon the kind of materials.

EN10025-6 S500Q 1.8924 killed carbon steel plate

Table numbers ending in the letter A designate that it was the primary criterion used for comparability, whereas table numbers ending with the letter B had been “mirrored” from the A tables. In this fashion, the user should first consider the data within the A table, then see how well the data within the B desk match the steels that are being compared. For example, ASTM A 958 Grade SC 4330 has one chemical composition, but has thirteen completely different strength lessons based mostly on heat treatment . So simply because two steel grades have comparative chemical compositions doesn’t mean that they’re comparable in mechanical properties, and vice versa.

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days