en 10025-6 s890ql steel plate 1/8 manufacturer
Content
Gangsteel Sell EN 10025-6 S890QL Extra High Strength Steel Plate and export EN10025-6 S890QL Quenched and Tempered Structural Steel IN China.What is EN 10025-6 Grade? S890QL Grade Designation , S = Structural Steel, 890 = minimum yield strength (MPa), Q = Quenching & Tempering and L = Low notch toughness testing temperatures
es
s890ql DNV BV GL LR steel plate,s890ql steel equivalent,s890ql steel plate,s890ql mechanical properties,s890ql properties,s890ql datenblatt,s890ql steel price,s890ql schweißen,en 10025-6 s890ql,welding s890ql,s890ql steel cutting parts,s890ql chemical and property,acier s890ql,s890ql werkstoff,s890ql hardness,s890ql equivalent,s890ql werkstoff datenblatt,s890ql datasheet,acciaio s890ql,s890ql material,blacha s890ql,s890ql steel stocklist,s890ql equivalent,s890ql equivalent steel,s890ql steel equivalent,s890ql steel platesteel plate,en 10025-6 s890ql steel plates manufacturer,en 10025-6 s890ql weight of steel plate manufacturer,en 10025-6 s890ql steel plate weight manufacturer,en 10025-6 s890ql steel plate prices manufacturer
It must be famous that when making use of a brand new quenching and tempering therapy, it’s not all the time possible to obtain the same properties as with the unique hot forming at the mill, because of totally different scorching forming gear, for example. In this respect we advocate you to contact us previous to ordering, in all cases where hot forming is required.
- Yield high quality, flexibility, and advancement ought to be researched utilizing pressure check and the required quality might be inspected utilizing rating high quality check.
- Precipitation invigorating and precipitation heat treatment must be carried out on the material to enhance and change the required adornment and mechanical properties.
- This specific spreads precipitation-stored up low carbon nickel copper-chromium-molybdenum-columbium amalgam central steel plates.
- After greater chilly forming quantities or if prescribed by rules, a brand new quenching and tempering remedy may become necessary to revive the required mechanical properties.
Pioneers in the trade, we provide s690 ql steel plate, s960q metal plates, a 514 steel plate, a 710 metal plate, s 690ql1 steel plate and s690q metal plates from India. RQT steels may be cut satisfactorily utilizing typical oxy-fuel gas practices, in lots of instances without the necessity for preheat, as long as slicing procedures keep in mind plate thicknesses and carbon equivalent values. Water jet, the place no heat is generated, or plasma cutting can also be used.
en 10025-6 s890ql steel plate 25mm thick manufacturer
DILLIMAX 965 is a excessive power quenched and tempered, fantastic grained structural steel with a minimal yield energy of 960 MPa in its delivery situation , which mechanical properties are achieved by water quenching adopted by tempering. Due to its excessive yield energy, DILLIMAX 890 requires special care during plate processing. In order to make sure that the tensile strength of the weld steel fulfils the necessities EN10025-6 S890QL Steel supplier of the bottom metallic, the heath enter and interpass temperature must be limited throughout welding. Experience has shown that the welding situations must be chosen in order that the cooling time t 8 / 5 does not exceed 15 seconds. This is relevant when using appropriate filler supplies of a corresponding yield strength class.
This steel is utilized in different applications similar to heavy transportation, building business, machine building, and lifting equipment. We ship merchandise in customizable options to meet customer-specified requirements. This specification covers precipitation-strengthened low carbon nickel copper-chromium-molybdenum-columbium alloy structural steel plates.
en 10025-6 s890ql steel plate weight per square foot manufacturer
Delivery conditions of s890q, s890ql, and s890ql1 steel plates. Quenching + tempering (q). Note: direct quenching followed by tempering after hot rolling is equivalent to conventional quenching and tempering.6. Impact properties of s890q, s890ql, and s890ql1 steel plates and S890q at – 20 ��, s890ql at – 50 ��, s890ql at – 60 ��
S890QL is extra high strength steel to EN10025-6:2004, and the steel number is 1.8983. S890QL has a minimum yield strength of 890Mpa in quenched and tempered conditions; with its low temperature of -40 ºC, this steel grade performs good durability in extreme working environments.
en 10025-6 s890ql steel plate 3mm thick manufacturer
These steel plates are used in welded bridges, high buildings and shipping container, and other exterior metal buildings. Further, our useful purchasers can avail these plates from us at the most affordable rates. When making use of a brand new quenching and tempering therapy, it must be noted that it isn’t all the time possible to acquire the same properties as with the original heat remedy on the mill, due to totally different heat remedy gear, for instance.
en 10025-6 s890ql steel plate weight calculator manufacturer,en 10025-6 s890ql steel plate for sale manufacturer,en 10025-6 s890ql steel plate 1/4 manufacturer,en 10025-6 s890ql steel plate armor manufacturer,en 10025-6 s890ql steel plate thickness manufacturer,en 10025-6 s890ql steel plate 1/8 manufacturer,en 10025-6 s890ql steel plate 3/16 manufacturer,en 10025-6 s890ql 3/16 steel plate manufacturer,en 10025-6 s890ql 1/8 steel plate manufacturer,en 10025-6 s890ql steel name plates manufacturer,en 10025-6 s890ql steel plate on road manufacturer,en 10025-6 s890ql steel plate 1/2 manufacturer,en 10025-6 s890ql steel plate sizes manufacturer,en 10025-6 s890ql 1/2 steel plate manufacturer
Designers, engineers, and plant operators try to cut back weight and enhance the efficiency of apparatus. There are important benefits available by using high strength quenched and tempered steels for maximum structura efficiency in excessive working environments.
Abrasive resistant weldable steel plates have a superb mixture of hardness, abrasion resistance, formability, weldability, toughness and flatness to meet fabrication demands and software requirements. Designed for through- hardness, Rockstar 400 has comparatively low carbon equal for superior weldability and is equipped in quenched and tempered condition. The specially designed tempering cycle renders formability with minimal impact on hardness.
Rockstar 400 is appropriate for yellow goods software in mining and construction markets corresponding to crushers, body liners for truck beds, buckets, hoppers, chutes, excavators and conveyor troughs. Concrete mixer drums, trash truck bottoms, bucket lips, avenue sweepers and dump trailers are amongst different functions.
en 10025-6 s890ql steel plates Mechanical Properties
Plate Thickness |
Yield |
Tensile Strength Rm(Mpa) |
Elongation |
3 to 50 |
890 |
940~1100 |
11 |
> 50 to 100 |
830 |
880~1100 |
11 |
Technical conditions for s890q, s890ql and s890ql1 steel plates
1. S890 steel plate is a quenched and tempered high strength steel plate with series grades of s890q, s890ql and s890ql1. It is a low carbon non alloy structural steel plate with European standard en10025-6. It can be produced by Wuyang Iron and steel company in China. In order to ensure its performance, the carbon content of this kind of steel plate is less than 0.2%.
2. S890q, s890ql and s890ql1 steel plates, where s means structural steel, Q means impact temperature of steel plate is – 20 ° C,Then QL means the impact temperature of the steel plate is – 50 ° C. guess what ql1 stands for, ql1 means the impact temperature of the steel plate is – 60 ° C, 890 means the minimum yield strength value specified by the thickness of (50 mm),
Chemical Composition – EN 10025-6 S890QL. Content % (ladle analysis), maximum.
C |
SI |
MN |
P |
S |
B |
CR |
CU |
MO |
0.20 |
0.80 |
1.70 |
0.020 |
0.010 |
0.005 |
1.50 |
0.50 |
0.70 |
N |
NB* |
NI |
TI* |
V* |
ZR* |
|
|
|
0.015 |
0.06 |
2.0 |
0.05 |
0.12 |
0.15 |
|
|
|
EN 10025-6 s890ql steel plates V Notch Impact Test
Position of Samples |
0 ºC |
-20 ºC |
-40 ºC |
Longitudinal |
50 Joules |
40 Joules |
30 Joules |
Transverse |
35 Joules |
30 Joules |
27 Joules |
en 10025-6 s890ql steel plates Quenched and Tempered Structural Steel
Minimum recommended inside bending radius | |
Axis of bend in transverse direction |
Axis of bend in longitudinal direction |
3. The steel specified in this standard can be used for the production of hot rolled plate with minimum nominal thickness of 3 mm and maximum nominal thickness of less than 150 mm for S460, S500, S550, S620, s690, S890 and s960 series steel plates. The minimum yield strength specified for Quenched and tempered steel is 460mpa1) to 960 mpa1)
4. Production size; Thickness; 6-300mm, width max 3800mm length.
en 10025-6 s890ql Chemical Composition
C |
Si |
Mn |
P |
S |
B |
Cr |
Cu |
Mo |
0.20 |
0.80 |
1.70 |
0.020 |
0.010 |
0.005 |
1.50 |
0.50 |
0.70 |
N |
Nb* |
Ni |
Ti* |
V* |
Zr* |
|||
0.015 |
0.06 |
2.0 |
0.05 |
0.12 |
0.15 |
PLATE THICKNESS MM |
YIELD STRENGTH REH (MPA) |
TENSILE STRENGTH RM (MPA) |
ELONGATION A5 % MINIMUM |
IMPACT STRENGTH J, MINIMUM |
3 to50 |
890 |
940 – 1100 |
11 |
30 @ -40º C |
50to 100 |
830 |
880 – 1100 |
11 |
30 @ -40º C |
en 10025-6 s890ql steel plates manufacturer and property Chemical Properties Of s890ql steel plate:
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
N |
Nb |
Ti |
Cu |
Zr |
B |
CEV |
max 0.2 |
max 0.8 |
max 1.7 |
max 2 |
max 0.025 |
max 0.015 |
max 1.5 |
max 0.7 |
max 0.12 |
max 0.015 |
max 0.06 |
max 0.05 |
max 0.5 |
max 0.15 |
max 0.005 |
max 0.82 |
Mechanical Properties Of s890ql steel plate:
Designation |
Mechanical Properties (ambient temperature) |
|||||||
Steel Name |
Steel Number |
Min. Yield Strength Reh MPa |
Tensile Strength Rm MPa |
Min. % elongation after fracture |
||||
Nominal thickness (mm) |
Nominal thickness (mm) |
|||||||
≥3 ≤50 |
≥50 ≤100 |
≥100 ≤150 |
≥3 ≤50 |
≥50 ≤100 |
≥100 ≤150 |
|||
S890QL |
1.8983 |
890 |
830 |
–– |
940/1100 |
880/1100 |
–– |
11 |
Notch Impact Energy:
Grade |
Sample Orientation |
@ 0°C |
@-20°C |
@-40°C |
@-60°C |
S890QL |
Longitudinal |
50 J |
40 J |
30 J |
–– |
Traverse |
35 J |
30 J |
27 J |
–– |
1.Grade:
S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
2. Specification:
Thickness: 8mm to 300mm
Width: 1500mm to 4200mm
Length: 4000mm to 18000mm
3. Adopt Standard: EN10025-6 2004
4. Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technology, etc.
5. Delivery Time: 30-40days
6. Payment Item: 30% TT, or LC and TT.
7..Trade Terms: FOB, CFR, CIF
8. Steel Services: Cutting, Painting, Pretreatment, and The third party inspection in DNV, BV, LR, ABS, SGS ,etc and others in super thick ship steel plate.
Gangsteel is specialized in super thick low alloy, high strength steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the super thickness plate to 300mm now.
If you have any inquiry in steel price or technical conditions, please contact us freely.
The average minimal yield for this materials is 355 N/mm², hence the name S355. DILLIMAX 1100 is preferentially used by the shoppers for welded steel constructions inside mechanical constructions, plant constructions and structural steel work, corresponding to machines for structural engineering, conveying plants, hoists, cranes and frameworks. DILLIMAX 690 is preferentially used for welded steel structures within mechanical constructions, plant constructions and structural steel works, such as machines for structural engineering, conveying crops, hoists, cranes, flood gates, bridges and frameworks. DILLIMAX 890 can be cold shaped with regard to its high yield power. Strenx 700 is a confounding key steel with thoughts blowing robustness for a couple of weight passing on structures and arranged purposes.
The standard specifies seven steel grades, and their yield strength at ambient temperature is different. All steel grades to be supplied in the following steps shall be established when required. The specified minimum value of impact energy when the weather is not lower than – 20 �� (no label). When the temperature is not lower than – 50 ��, the specified minimum value of impact energy is expressed in L. (except for s960), the minimum amount of impact energy set when the temperature is not lower than – 60 �� is defined as L1. In quenching and tempering delivery conditions (q) and grade L: Steel en 10025-6-s460ql; or steel en10025-6-1.8906.