S690ql Spec
Gangsteel Produce and export EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. EN 10025-6 S690QL ,,EN 10025-6 S690QL steel,EN 10025-6 S690QL equivalent,EN 10025-6 S690QL datenblatt,EN 10025-6 S690QL material,en 10025-6 EN 10025-6 S690QL,EN 10025-6 S690QL equivalent material,EN 10025-6 S690QL material equivalent,EN 10025-6 S690QL plate,EN 10025-6 S690QL data sheet,EN 10025-6 S690QL hardness,EN 10025-6 S690QL thyssenkrupp,EN 10025-6 S690QL properties, EN 10025-6 S690QL equivalent astm,EN 10025-6 S690QL chemical composition,EN 10025-6 S690QL welding,EN 10025-6 S690QL suppliers and EN10025-6
What Is S690ql Steel Plate?
These plates are rust free and corrosion resistant as a result of their capability to face up to all pressures and temperatures. S690QL plates can be utilized in quite a lot of processes including slicing, grinding and testing.
En 10025 6 S690qls690 Qls690ql High Yield Steel
|
Grade |
Sample Orientation |
@ 0°C |
@-20°C |
@-40°C |
@-60°C |
|
S690QL |
Longitudinal |
50 J |
40 J |
30 J |
¨C¨C |
|
Traverse |
35 J |
30 J |
27 J |
¨C¨C |
The production of the S690QL GANGSTEEL PLATES is done by using premium quality of alloy that is actually sourced from reliable market vendors. The material here is heat treated the tempering and quenching process and is having excellent welding and ending properties.s690ql1 property pneuscoolscharleroi.beS690QL1 Quenched and Tempered Structural Steel Beverly EN10025 S690QL1 Extra Toughness Steel Plate. Steel Number 1.8988 EN10025:6:2004 S690QL1 has a minimum yield strength of 690Mpa in quenched and The causes of multiple sclerosis Use Prednisone tempered conditions, it has extra tough with minimum impact values lower to 60ºC..Microstructure, mechanical properties and microtexture of 1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters. Various microstructures are formed but no martensite after process optimization. Texture is modified in mechanically affected zones of the weld.
S690 QL steel is a high yield structural steel grade produced in compliance with EN 10025:6:2004.The material is heat treated using the quench and temper process and has good bending and welding properties. Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.S690 QL steel,S690QL Chemical,S690QL steel supplier GANGSTEEL Offer S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004.If you need buy S690 QL,we can offer S690QL Mechanical Properties and S690QL Chemical Composition.En10025:S690Q S690QL S690QL1 pressure vessel steel plates7.chemical composition, mechanical property,and yield strength If you need EN10025:S460Q S460QL S460QL1 S500Q S500QL S500QL1 S550Q S550QL S550QL1 S620Q S620QL S620QL1 S690Q S690QL S690QL1 S890Q S890QL S890QL1 S960Q S960QL pressure vessel steel plate,or chemical composition, mechanical property,and tensile strength
Gangsteel supply EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. Call for more information or find out more here.
S690QL – Grade Designation
The grade designation of S690QL are the following:
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Quenching & Tempering
L = Low notch toughness testing temperature
EN 10025-6 S690QL – Chemical Composition
| Element |
Percentage % |
Element |
Percentage % |
|
C |
0.20 |
Cu |
0.50 |
|
Si |
0.80 |
Mo |
0.70 |
|
Mn |
1.70 |
Nb* |
0.06 |
|
P |
0.025 |
Ni |
2.0 |
|
S |
0.015 |
Ti* |
0.05 |
|
N |
0.015 |
V* |
0.12 |
|
B |
0.0050 |
Zr* |
0.15 |
|
Cr |
1.50 |
EN 10025-6 S690QL – V Notch Impact Testing
|
Designation |
Mechanical Properties (ambient temperature) |
|||||||
|
Steel Name |
Steel Number |
Min. Yield Strength Reh MPa |
Tensile Strength Rm MPa |
Min. % elongation after fracture |
||||
|
Nominal thickness (mm) |
Nominal thickness (mm) |
|||||||
|
≥3 ≤50 |
≥50 ≤100 |
≥100 ≤150 |
≥3 ≤50 |
≥50 ≤100 |
≥100 ≤150 |
|||
|
S690QL |
1.8931 |
690 |
650 |
630 |
770/940 |
760/930 |
710/900 |
14 |
Due to the material’s high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency. The technical details of S690QL are outlined below. S690QL Grade Designation. The grade designation of S690QL are the followings = Structural Steel; 690 = minimum yield strength (MPa)S690QL / 1.8928 Steel Number Chemical composition Chemical composition of steel S690QL (1.8928), Standards of steel S690QL (1.8928) Mechanical Properties of steel S690QL (1.8928) Equivalent grades of steel S690QL (1.8928) steel S690QL (1.8928) Tensile Strength, Elongation, Proof strength , HardnessS690QL High Yield Strength SteelS690QL Dillimax 690T is a fine grained quenched and tempered steel plate notable for its high strength. S690QL plates are used in a wide variety of engineering applications where strength is important including cranes, critical structural components in building and stadia and
EN 10025-6 S690QL stock list
| Grade |
Size mm |
Thick |
Width |
Length |
|
BS700MCK2 |
6*1500*13000 |
6 |
1500 |
13000 |
|
BS700MCK2 |
6*1500*13000 |
6 |
1500 |
13000 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*6100 |
6 |
1500 |
6100 |
|
BS700MCK2 |
6*1500*8500 |
6 |
1500 |
8500 |
|
BS700MCK2 |
6*1500*8500 |
6 |
1500 |
8500 |
|
BS700MCK2 |
6*1500*8500 |
6 |
1500 |
8500 |
|
BS700MCK2 |
6*1550*11000 |
6 |
1550 |
11000 |
|
BS700MCK2 |
7*1500*11000 |
7 |
1500 |
11000 |
|
BS700MCK2 |
7*1500*11000 |
7 |
1500 |
11000 |
|
BS700MCK2 |
7*1500*11000 |
7 |
1500 |
11000 |
|
BS700MCK2 |
7*1500*11000 |
7 |
1500 |
11000 |
|
BS700MCK2 |
8*1500*11000 |
8 |
1500 |
11000 |
|
BS700MCK2 |
8*1500*11000 |
8 |
1500 |
11000 |
|
BS700MCK2 |
8*1500*11000 |
8 |
1500 |
11000 |
|
BS700MCK2 |
8*1500*13000 |
8 |
1500 |
13000 |
|
BS700MCK2 |
8*1550*6100 |
8 |
1550 |
6100 |
|
BS700MCK2 |
8*1550*6100 |
8 |
1550 |
6100 |
|
BS700MCK2 |
8*1550*6100 |
8 |
1550 |
6100 |
|
BS700MCK2 |
8*1800*13000 |
8 |
1800 |
13000 |
|
BS700MCK2 |
8*1800*13000 |
8 |
1800 |
13000 |
|
BS900D |
3*1400*9000 |
3 |
1400 |
9000 |
|
BS900D |
3*1400*9000 |
3 |
1400 |
9000 |
|
BS900D |
4*1500*13000 |
4 |
1500 |
13000 |
|
BS900D |
5*1500*12000 |
5 |
1500 |
12000 |
|
BS900D |
6*1650*12300 |
6 |
1650 |
12300 |
|
BS900D |
6*1650*12300 |
6 |
1650 |
12300 |
|
BS900D |
6*1650*2500 |
6 |
1650 |
2500 |
|
BS900D |
7*1500*12000 |
7 |
1500 |
12000 |
|
BS900D |
7*1500*12000 |
7 |
1500 |
12000 |
|
BS900D |
8*1500*12000 |
8 |
1500 |
12000 |
|
BS900D |
8*1800*13000 |
8 |
1800 |
13000 |
|
BS960E |
12*1500*12000 |
12 |
1500 |
12000 |
|
BS960E |
12*1500*12000 |
12 |
1500 |
12000 |
|
BS960E |
3*1400*9000 |
3 |
1400 |
9000 |
|
BS960E |
4*1500*13000 |
4 |
1500 |
13000 |
|
BS960E |
4*1500*13000 |
4 |
1500 |
13000 |
|
BS960E |
5*1500*12000 |
5 |
1500 |
12000 |
|
BS960E |
5*1500*12000 |
5 |
1500 |
12000 |
Hot forming of S690QL and different excessive yield steels is not recommended as the recent forming will remove the advantages of the mills tempering course of. This implies that the recent formed plate will then need to be tempered once more. Given that a lot of the strength of the plate comes from the optimised tempering process any advert hoc tempering is more likely to lead to quote different results than those of the preliminary plate. Consequently the MTC will not mirror the precise properties of the steel. In order to make sure that the tensile strength of the weld steel fulfils the requirements of the bottom steel, the heat input and interpass temperature have to be limited throughout welding.
To regain the initial properties new quenching and tempering become needed. However, water quenching of a formed workpiece or element will usually be much less efficient than the unique quenching in the plate mill so that the fabricator might not have the ability to reestablish the properties required and due to this fact hot forming will not be appropriate. In this respect we advocate you to contact the metal producer prior to ordering, in all cases the place hot forming is required.
Experience has shown that the welding conditions should be chosen so that the cooling time t 8 / 5 doesn’t exceed 20 seconds. This is relevant when using suitable filler materials of a corresponding yield energy class.
for welding the structures made of the high stren gth steel S690QL is presented. That steel belongs in to a group of steels with e xceptional mechanical properties. The most prominent properties S690QL Structural Steel Plate, S690QL Plate, DILLIMAX 690 S690QL Structural Steel Plate Specification Thickness 12 60mm Width 1500 3500mm Length 3000 18000mm Grade S690QL EN10137 2 EN10025 6:2004, A709 100, DILLIMAX 690, NAXTRA 70, WELDOX 700, E690, JFE HITEN 780LE, ALFORM 700. Properties of S690QL Structural Steel PlateEN 10025 6 S690QL high yield structural steels Plates Other Types Of EN 10025 6 S690QL Q + T structural steels Plates . EN 10025 6 Plates Stockholder, S690QL Plates Stockists in Maharashtra Mumbai, Grade S690QL hot rolled structural steel Plates Stockyard, high yield strength EN 10025 6 S690QL structural steels Plate wholesaler, S690QL (Q + T ) quenched and tempered condition heat treatment steel plate, material No. 1.8928 Plates Suppliers
S690QL Plates is a high yield structural steel or High strength steels grade produced in compliance with EN 10025:6:2004. The material is heats treated using the quench and temper process and has good bending and welding propertiesS690QL/S690QL1/S690QL2 High Strength Steel PlateS690Q/S690QL/S690QL1 HSLA steel plate with Quenching and Tempering Steel. 1.Applicationlow temperature resistant, high strength of key parts, construction machinery, mining machinery structure, etc. 2 .Steel GradesS690Q/S690QL/S690QL1 . Execution standardBS EN10025 04 Size5 ~ 300 mm x 1500 4500 mm x L. 3 . Supply technical conditionsMicrostructure, mechanical properties and microtexture of It is shown that it is possible to weld this high yield strength steel using FSW process with satisfactory geometric, microstructural and mechanical properties. Highlights1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters.
Two try out campaigns of friction stir welding (FSW) were performed with different friction parameters to join S690QL high yield strength steel. The welds were investigated at macroscopic and microscopic scales using optical and electronic microscopy and microhardness mapping. Welds of the second campaign exhibit microstructures and mechanical EN 10025 6 S690QLS690 QLS690QL High Yield Steel Victor Steel is leading suppliers of S690QL Steel Plates.we have Large stock of EN 10025 6 S690QL plate.EN 10025 S690QL High Strength Structural Steel Plate price US $300 800/TonS690QL Plate Supplier Exporter India / S690QL Plate Price S690ql Steel Exporter India, Astm A514 S690ql High Tensile Structural Steel Plate, High Yeild Strength Alloy Naxtra M700 Steel Plates, Dillimax 690t High Yeild Steel Plates Exporter, Qste 690 Tm Hsla Yield Steel Plate, Din En S690 Q Plates Stockiest, S890ql Steel
S690QL Longitudinal Transverse 35 J 40 J 30 J 30 J 27 J 60 J S690QL1 Longitudinal Transverse 40 J 50 J 35 J 40 J 30 J 30 J 27 J Number of Tests Tensile test and impact test (3 samples) every 40 t or per heat treatment unit respectively.Mechanical properties of EN10025 6 1.8928 high strength EN10025 6 1.8928 high strength S690QL steel plate is structural steel grade with good bending and welding properties. S690QL steel plate is always heat treated using the quench and temper process. In S690QL steel, the code “S” means structural steel; the code “Q”refers to the delivery condition, in this case to quenched & Tempered; the code “L” means that the average minimum values for impact S690 QL EN 100256:2004 + A1:2009 Quenched and 1) The code “S” for steel grade S690QL means structural steel. 2) The code “Q” refers to the delivery condition, in this case to quenched and tempered. 3) Code “L” means that the average minimum values for impact energy have been defined at a temperature of 40°C.
- The special procedures for enhancing it are mentioned right here, primarily preheating, controlled warmth enter throughout welding and additional heat remedy of the welded joint.
- The advantages that the S690QL steels have with respect to other steels are being introduced here.
- However, possibilities for software of these steels in responsible welded structures are limited due to their only relatively good weldability.
- In Europe the structural steel specification EN includes a vary of high strength quenched and tempered metal grades and the designation S690QL gives the parameters for steel with a minimal yield strength of 690 MPa.
While joints are produced with higher warmth enter, the grain construction is instability in the nugget zone during the resolution heat therapy. Especially, the strengthening perform of the solution heat therapy and getting older treatment is fail whereas the millimeter scale grain have been fashioned in the nugget zone. Owing to the fabric’s excessive energy nature, using the S690QL will promote leaner designed constructions with higher payload capability and energy effectivity.
S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the supplies excessive energy nature, utilizing S690QL will promote leaner designed buildings with elevated payload capacity and energy effectivity. S690QL could possibly be via the -40 temperature impact and the energy is 30J. We manufacture and provide S690QL plates of top of the range which might be a hundred% leak proof. Due to their rust resistant nature, they’re popularly utilized in various industries.
The XIO is dedicated to upstream Oil and Gas functions and supplies distant expansion for each brownfield and greenfield flow computers and RTUs. In this interview, AZoM talks to Rohit Ramnath, a Senior Process Engineer at Master Bond, about tips on how to handle stresses caused by CTE mismatches in adhesive functions. In this interview, Gareth Powell, strategic marketing manager at Teledyne e2v, speaks to AZoM about how the 2M Mipi Optical Module can cut back the time and value of development in AI and ADC applications. S690QL Steel Plate is sleeved into plastic bag individually, items wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for straightforward identification of the amount and product I.D.
In Europe the structural metal specification EN includes a vary of high energy quenched and tempered steel grades and the designation S690QL gives the parameters for steel with a minimal yield energy of 690 MPa. S690QL A excessive energy structural metal provided in quenched and tempered condition. The steel is designed to offer wonderful welding and bending properties and it offers substantial prospects for financial savings in materials costs, processing and handing. Due to its high strength, it permits design of lighter, extra sturdy and efficient merchandise and constructions. DILLIMAX 690 is a high strength quenched and tempered, fantastic grained structural metal with a minimum yield power of 690 MPa in its supply situation .
Tensile and impact exams might be carried out based on EN as soon as per heat and forty https://gangsteel.com/low-alloy-and-high-strength-steel-plate/en10025-6-steel-plate/ t. The check items are taken and prepared according to half 1 and 6 of EN 10025.