Steel Plates\ Vandan Steel & Engg Co.

Gangsteel Produce and export EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. EN 10025-6 S690QL ,,EN 10025-6 S690QL steel,EN 10025-6 S690QL equivalent,EN 10025-6 S690QL datenblatt,EN 10025-6 S690QL ,en 10025-6 EN 10025-6 S690QL,EN 10025-6 S690QL equivalent ,EN 10025-6 S690QL equivalent,EN 10025-6 S690QL plate,EN 10025-6 S690QL data sheet,EN 10025-6 S690QL hardness,EN 10025-6 S690QL thyssenkrupp,EN 10025-6 S690QL properties, EN 10025-6 S690QL equivalent astm,EN 10025-6 S690QL chemical composition,EN 10025-6 S690QL welding,EN 10025-6 S690QL suppliers and EN10025-6

Depending on the kind of metal which is used, a proper welding methodology and sufficient filler materials should be applied. The current paper describes the affect of Mn, Ni, Mo, Cr, V in WMD on the behaviour of metal structure especially for low temperature service. We present the experimental-numerical evaluation of the influence of temperature on mechanical properties of structural excessive-power steel class S690QL.

The simulations have been also verified with intensive experimental investigations. It was proven that important hardening on S355 metal, which was proportional to the variety of impacts. The results of the secondary impacts on the primary FEM-outcomes showed higher prediction of the groove geometry and marginal impact on the residual stress distribution.

S690QL

Grade

Sample Orientation

@ 0°C

@-20°C

@-40°C

@-60°C

S690QL

Longitudinal

50 J

40 J

30 J

¨C¨C

Traverse

35 J

30 J

27 J

¨C¨C

The production of the S690QL GANGSTEEL PLATES is done by using premium quality of alloy that is actually sourced from reliable market vendors. The material here is heat treated the tempering and quenching process and is having excellent welding and ending properties.s690ql1 property pneuscoolscharleroi.beS690QL1 Quenched and Tempered Structural Steel Beverly EN10025 S690QL1 Extra Toughness Steel Plate. Steel 1.8988 EN10025:6:2004 S690QL1 has a minimum yield strength of 690Mpa in quenched and The causes of multiple sclerosis Use Prednisone tempered conditions, it has extra tough with minimum impact values lower to 60ºC..Microstructure, mechanical properties and microtexture of 1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters. Various microstructures are formed but no martensite after process optimization. Texture is modified in mechanically affected zones of the weld.

 

S690 QL steel is a high yield structural steel grade produced in compliance with EN 10025:6:2004.The material is heat treated using the quench and temper process and has good bending and welding properties. Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.S690 QL steel,S690QL Chemical,S690QL steel supplier GANGSTEEL Offer S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004.If you need buy S690 QL,we can offer S690QL Mechanical Properties and S690QL Chemical Composition.En10025:S690Q S690QL S690QL1 pressure vessel steel plates7.chemical composition, mechanical property,and yield strength If you need EN10025:S460Q S460QL S460QL1 S500Q S500QL S500QL1 S550Q S550QL S550QL1 S620Q S620QL S620QL1 S690Q S690QL S690QL1 S890Q S890QL S890QL1 S960Q S960QL pressure vessel steel plate,or chemical composition, mechanical property,and tensile strength

Gangsteel supply EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. Call for more information or find out more here.
S690QL – Grade Designation
The grade designation of S690QL are the following:
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Quenching & Tempering
L = Low notch toughness testing temperature

EN 10025-6 S690QL – Chemical Composition

Element

Percentage %

Element

Percentage %

C

0.20

Cu

0.50

Si

0.80

Mo

0.70

Mn

1.70

Nb*

0.06

P

0.025

Ni

2.0

S

0.015

Ti*

0.05

N

0.015

V*

0.12

B

0.0050

Zr*

0.15

Cr

1.50

 

EN 10025-6 S690QL – V Notch Impact Testing

Designation

Mechanical Properties (ambient temperature)

Steel Name

Steel Number

Min. Yield Strength Reh MPa

Tensile Strength Rm MPa

Min. % elongation after fracture

Nominal thickness (mm)

Nominal thickness (mm)

≥3 ≤50

≥50 ≤100

≥100 ≤150

≥3 ≤50

≥50 ≤100

≥100 ≤150

S690QL

1.8931

690

650

630

770/940

760/930

710/900

14

Due to the material’s high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency. The technical details of S690QL are outlined below. S690QL Grade Designation. The grade designation of S690QL are the followings = Structural Steel; 690 = minimum yield strength (MPa)S690QL / 1.8928 Steel Number Chemical composition Chemical composition of steel S690QL (1.8928), Standards of steel S690QL (1.8928) Mechanical Properties of steel S690QL (1.8928) Equivalent grades of steel S690QL (1.8928) steel S690QL (1.8928) Tensile Strength, Elongation, Proof strength , HardnessS690QL High Yield Strength SteelS690QL Dillimax 690T is a fine grained quenched and tempered steel plate notable for its high strength. S690QL plates are used in a wide variety of engineering applications where strength is important including cranes, critical structural components in building and stadia and
EN 10025-6 S690QL stock list

Grade

Size mm

Thick

Width

Length

BS700MCK2

6*1500*13000

6

1500

13000

BS700MCK2

6*1500*13000

6

1500

13000

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1550*11000

6

1550

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*13000

8

1500

13000

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1800*13000

8

1800

13000

BS700MCK2

8*1800*13000

8

1800

13000

BS900D

3*1400*9000

3

1400

9000

BS900D

3*1400*9000

3

1400

9000

BS900D

4*1500*13000

4

1500

13000

BS900D

5*1500*12000

5

1500

12000

BS900D

6*1650*12300

6

1650

12300

BS900D

6*1650*12300

6

1650

12300

BS900D

6*1650*2500

6

1650

2500

BS900D

7*1500*12000

7

1500

12000

BS900D

7*1500*12000

7

1500

12000

BS900D

8*1500*12000

8

1500

12000

BS900D

8*1800*13000

8

1800

13000

BS960E

12*1500*12000

12

1500

12000

BS960E

12*1500*12000

12

1500

12000

BS960E

3*1400*9000

3

1400

9000

BS960E

4*1500*13000

4

1500

13000

BS960E

4*1500*13000

4

1500

13000

BS960E

5*1500*12000

5

1500

12000

BS960E

5*1500*12000

5

1500

12000

The work offers with the thermodynamic calculations of precipitation processes in austenite of the Nb-Ti-microalloyed steel with elevated Si and Al content material dedicated for the automotive business. The evaluation relies on the equilibrium precipitation of individual MX-kind interstitial phases, in addition to the effect of various Mn and Si additions is included. The solubility products and corresponding limits of the mutual solubility of microalloy and metalloid additions in austenite were calculated.

References (

  • Herein, thirteen-mm-thick S690QL welded joints were obtained with out filler supplies using the fiber laser.
  • We deliver merchandise in customizable choices to fulfill customer-specified requirements.
  • The use of fiber laser welding to affix S690QL steels has attracted curiosity in the area of development and assembly.

S690ql Steel Grade, Mechanical Properties, Chemical Composition, Grade Equivalent

DILLIMAX 690 is preferentially used for welded metal structures inside mechanical constructions, plant constructions and structural metal works, corresponding to machines for structural engineering, conveying plants, hoists, cranes, flood gates, bridges and frameworks. The EN GRADE S690QL PLATES goes throgh Hydroforming is a course of that’s analogous to deep drawing. followed by Incremental sheet forming which is principally sheet metal working or sheet steel forming course of. EN GRADE S690QL PLATES is passed over ironing uniformly thins the workpiece in a particular area.

for welding the structures made of the high stren gth steel S690QL is presented. That steel belongs in to a group of steels with e xceptional mechanical properties. The most prominent properties S690QL Structural Steel Plate, S690QL Plate, DILLIMAX 690 S690QL Structural Steel Plate Specification Thickness 12 60mm Width 1500 3500mm Length 3000 18000mm Grade S690QL EN10137 2 EN10025 6:2004, A709 100, DILLIMAX 690, NAXTRA 70, WELDOX 700, E690, JFE HITEN 780LE, ALFORM 700. Properties of S690QL Structural Steel PlateEN 10025 6 S690QL high yield structural steels Plates Other Types Of EN 10025 6 S690QL Q + T structural steels Plates . EN 10025 6 Plates Stockholder, S690QL Plates Stockists in Maharashtra Mumbai, Grade S690QL hot rolled structural steel Plates Stockyard, high yield strength EN 10025 6 S690QL structural steels Plate wholesaler, S690QL (Q + T ) quenched and tempered condition heat treatment steel plate, material No. 1.8928 Plates Suppliers

S690QL Plates is a high yield structural steel or High strength steels grade produced in compliance with EN 10025:6:2004. The material is heats treated using the quench and temper process and has good bending and welding propertiesS690QL/S690QL1/S690QL2 High Strength Steel PlateS690Q/S690QL/S690QL1 HSLA steel plate with Quenching and Tempering Steel. 1.Applicationlow temperature resistant, high strength of key parts, construction machinery, mining machinery structure, etc. 2 .Steel GradesS690Q/S690QL/S690QL1 . Execution standardBS EN10025 04 Size5 ~ 300 mm x 1500 4500 mm x L. 3 . Supply technical conditionsMicrostructure, mechanical properties and microtexture of It is shown that it is possible to weld this high yield strength steel using FSW process with satisfactory geometric, microstructural and mechanical properties. Highlights1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters.

Two try out campaigns of friction stir welding (FSW) were performed with different friction parameters to join S690QL high yield strength steel. The welds were investigated at macroscopic and microscopic scales using optical and electronic microscopy and microhardness mapping. Welds of the second campaign exhibit microstructures and mechanical EN 10025 6 S690QLS690 QLS690QL High Yield Steel Victor Steel is leading suppliers of S690QL Steel Plates.we have Large stock of EN 10025 6 S690QL plate.EN 10025 S690QL High Strength Structural Steel Plate price US $300 800/TonS690QL Plate Supplier Exporter India / S690QL Plate Price S690ql Steel Exporter India, Astm A514 S690ql High Tensile Structural Steel Plate, High Yeild Strength Alloy Naxtra M700 Steel Plates, Dillimax 690t High Yeild Steel Plates Exporter, Qste 690 Tm Hsla Yield Steel Plate, Din En S690 Q Plates Stockiest, S890ql Steel

S690QL Longitudinal Transverse 35 J 40 J 30 J 30 J 27 J 60 J S690QL1 Longitudinal Transverse 40 J 50 J 35 J 40 J 30 J 30 J 27 J Number of Tests Tensile test and impact test (3 samples) every 40 t or per heat treatment unit respectively.Mechanical properties of EN10025 6 1.8928 high strength EN10025 6 1.8928 high strength S690QL steel plate is structural steel grade with good bending and welding properties. S690QL steel plate is always heat treated using the quench and temper process. In S690QL steel, the code “S” means structural steel; the code “Q”refers to the delivery condition, in this case to quenched & Tempered; the code “L” means that the average minimum values for impact S690 QL EN :2004 + A1:2009 Quenched and 1) The code “S” for steel grade S690QL means structural steel. 2) The code “Q” refers to the delivery condition, in this case to quenched and tempered. 3) Code “L” means that the average minimum values for impact energy have been defined at a temperature of 40°C.

A carbon-depleted layer and carbon-wealthy layer formed at 600 °C, 700 °C, and 800 °C. The optimal post-weld heat treatment temperature was determined to be 600 °C.

EN 10025-6 S690QL material number

The major exams consisted of managed cooling of undeformed or plastically deformed austenite using the dilatometer inside the cooling fee range of two–0.5 °C s−1. The results of the cooling fee and deformation at temperatures of 900 and 1,050 °C on the section transformation behaviour and microstructure have been defined. The ultimate experiment was carried out utilizing a thermo-mechanical simulator underneath conditions of multi-step deformation and isothermal holding of the metal at 400 °C.

• Shovel and Cranes, their booms and their types like tower crane, moveable crane, cable crane and truck mounted crane are heavy weight lifters, leading to their production by S690QL1, SUPERELSO 690, EN FeE690VKT, grade metal plates, gentle in weight and carry the additional load. Construction of buildings, bridges, towers and other structures demand gear https://gangsteel.com/low-alloy-and-high-strength-steel-plate/en10025-6-steel-plate/ and machines which might be inordinately rigid and rugged. If buckets, bulldozers, cranes, vehicles, loaders, and so on. are manufactured from EN S690QL1, EN S690Q, ALDUR 700 Q and different alternates of S690QL1 metal plates, it’s going to catalyse the velocity of building.

The temperature sequence of the precipitation beneath equilibrium circumstances was determined. The Dutta-Sellars model has been applied for dedication of recrystallization stop temperature of austenite and time needed for Nb precipitation. The calculations have been verified by microstructure investigations including revealing prior austenite grain measurement as a perform of austenitizing temperature and the identification of complicated carbonitrides utilizing transmission electron microscopy.

Since the steel S690QL belongs to a group of steels with good mechanical properties, the goal of this paper is to determine the highest temperatures at which these good characteristics are kept. Experimental tensile testings of the specimens were performed at 5 different temperatures in the vary from 20 to 550°C. Beside experimental testing, strengthening curves had been calculated and numerical analysis utilizing finite element methodology was performed. Both the experimental and numerical results have shown that decrease of mecahanical properties happens at approximately 450°C. Owing to our expertise and expertise in S690QL1 structural steel plates, we are suppliers of top quality, dent – free structural metal plates to quite a lot of industries.

EN 10025-6 S690QL material number 1
Tagged on: