EN10025-6 S690QL

Gangsteel Produce and export EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. EN 10025-6 S690QL ,,EN 10025-6 S690QL steel,EN 10025-6 S690QL equivalent,EN 10025-6 S690QL datenblatt,EN 10025-6 S690QL material,en 10025-6 EN 10025-6 S690QL,EN 10025-6 S690QL equivalent material,EN 10025-6 S690QL material equivalent,EN 10025-6 S690QL plate,EN 10025-6 S690QL data sheet,EN 10025-6 S690QL hardness,EN 10025-6 S690QL thyssenkrupp,EN 10025-6 S690QL properties, EN 10025-6 S690QL equivalent astm,EN 10025-6 S690QL chemical composition,EN 10025-6 S690QL welding,EN 10025-6 S690QL suppliers and EN10025-6

• We offer excessive diagram s690ql metal plate at orchestrate cost.
• As the method of quenching and tempered has been improved and refined, carbon steel plates produced this way have turn out to be stronger and it isn’t unusual now to search out plates with strengths of more that 1100 MPa which is four occasions stronger than basic structural metal.
• It is ready to enhance the performance, durability, and security of autos, lifting gear, and steel constructions.
• Steel with minimal yield power of 690 MPa has proved extremely popular with steel users due to its availability, worth, and ease of fabrication.
• These s690ql steel plate are passed on utilizing best grade merciless materials open to make sure basic high quality.

 

S690 QL steel is a high yield structural steel grade produced in compliance with EN 10025:6:2004.

The material is heat treated using the quench and temper process and has good bending and welding properties.

Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.S690 QL steel,S690QL Chemical,S690QL steel supplier

GANGSTEEL Offer S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004.

If you need buy S690 QL,we can offer S690QL Mechanical Properties and S690QL Chemical Composition.

En10025:S690Q S690QL S690QL1 pressure vessel steel plates7.chemical composition, mechanical property,and yield strength

If you need EN10025:S460Q S460QL S460QL1 S500Q S500QL S500QL1 S550Q S550QL S550QL1 S620Q S620QL S620QL1 S690Q S690QL S690QL1 S890Q S890QL S890QL1 S960Q S960QL pressure vessel steel plate,or chemical composition, mechanical property,and tensile strength

Gangsteel supply EN 10025 S690QL high strength steel plate, high yield, structural alloy quenched and tempered steel plate. Call for more information or find out more here.
S690QL – Grade Designation
The grade designation of S690QL are the following:
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Quenching & Tempering
L = Low notch toughness testing temperature

EN 10025-6 S690QL – Chemical Composition

Element	Percentage %	Element	Percentage %
C	0.20	Cu	0.50
Si	0.80	Mo	0.70
Mn	1.70	Nb*	0.06
P	0.025	Ni	2.0
S	0.015	Ti*	0.05
N	0.015	V*	0.12
B	0.0050	Zr*	0.15
Cr	1.50

 

Designation		Mechanical Properties (ambient temperature)
Steel Name	Steel Number	Min. Yield Strength Reh MPa			Tensile Strength Rm MPa			Min. % elongation after fracture
		Nominal thickness (mm)			Nominal thickness (mm)
		≥3 ≤50	≥50 ≤100	≥100 ≤150	≥3 ≤50	≥50 ≤100	≥100 ≤150
S690QL	1.8931	690	650	630	770/940	760/930	710/900	14

ble stress relieving temperature for S690QL is (560 C/1040 F) and chilly forming takes place below this temperature.