En 10025 S690ql

Gangsteel Produce and export EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. EN 10025-6 S690QL ,,EN 10025-6 S690QL steel,EN 10025-6 S690QL equivalent,EN 10025-6 S690QL datenblatt,EN 10025-6 S690QL material,en 10025-6 EN 10025-6 S690QL,EN 10025-6 S690QL equivalent material,EN 10025-6 S690QL material equivalent,EN 10025-6 S690QL plate,EN 10025-6 S690QL data sheet,EN 10025-6 S690QL hardness,EN 10025-6 S690QL thyssenkrupp,EN 10025-6 S690QL properties, EN 10025-6 S690QL equivalent astm,EN 10025-6 S690QL chemical composition,EN 10025-6 S690QL welding,EN 10025-6 S690QL suppliers and EN10025-6

Experimental tensile testings of the welded joints had been carried out at 5 completely different temperatures in the range from 20 to 550 °C. It is feasible to supply metal plates that have more than twice the strength of these produced from delicate steel by way of a heat treatment course of often known as quenching and tempering.

We perceive prospects whose requirement for High power steels Plates is excessive and who cannot use inferior quality metal plates. One of the benefits that S690QL has over more traditional steels is that whilst on a per ton foundation the plates are more expensive the development costs may be considerably lowered. This is as a result of far less steel over all is required, welding costs is decreased and the prices for filler are additionally decreased. Additionally there are the cost savings to be made in operation as a result of lighter equipment which means much less structural help prices, energy prices for movement or each.

S690QL

Grade

Sample Orientation

@ 0°C

@-20°C

@-40°C

@-60°C

S690QL

Longitudinal

50 J

40 J

30 J

¨C¨C

Traverse

35 J

30 J

27 J

¨C¨C

The production of the S690QL GANGSTEEL PLATES is done by using premium quality of alloy that is actually sourced from reliable market vendors. The material here is heat treated the tempering and quenching process and is having excellent welding and ending properties.s690ql1 property pneuscoolscharleroi.beS690QL1 Quenched and Tempered Structural Steel Beverly EN10025 S690QL1 Extra Toughness Steel Plate. Steel Number 1.8988 EN10025:6:2004 S690QL1 has a minimum yield strength of 690Mpa in quenched and The causes of multiple sclerosis Use Prednisone tempered conditions, it has extra tough with minimum impact values lower to 60ºC..Microstructure, mechanical properties and microtexture of 1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters. Various microstructures are formed but no martensite after process optimization. Texture is modified in mechanically affected zones of the weld.

 

S690 QL steel is a high yield structural steel grade produced in compliance with EN 10025:6:2004.The material is heat treated using the quench and temper process and has good bending and welding properties. Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.S690 QL steel,S690QL Chemical,S690QL steel supplier GANGSTEEL Offer S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004.If you need buy S690 QL,we can offer S690QL Mechanical Properties and S690QL Chemical Composition.En10025:S690Q S690QL S690QL1 pressure vessel steel plates7.chemical composition, mechanical property,and yield strength If you need EN10025:S460Q S460QL S460QL1 S500Q S500QL S500QL1 S550Q S550QL S550QL1 S620Q S620QL S620QL1 S690Q S690QL S690QL1 S890Q S890QL S890QL1 S960Q S960QL pressure vessel steel plate,or chemical composition, mechanical property,and tensile strength

Gangsteel supply EN 10025 S690QL high strength, high yield, structural alloy quenched and tempered steel plate. Call for more information or find out more here.
S690QL – Grade Designation
The grade designation of S690QL are the following:
S = Structural Steel
690 = minimum yield strength (MPa)
Q = Quenching & Tempering
L = Low notch toughness testing temperature

EN 10025-6 S690QL – Chemical Composition

Element

Percentage %

Element

Percentage %

C

0.20

Cu

0.50

Si

0.80

Mo

0.70

Mn

1.70

Nb*

0.06

P

0.025

Ni

2.0

S

0.015

Ti*

0.05

N

0.015

V*

0.12

B

0.0050

Zr*

0.15

Cr

1.50

 

EN 10025-6 S690QL – V Notch Impact Testing

Designation

Mechanical Properties (ambient temperature)

Steel Name

Steel Number

Min. Yield Strength Reh MPa

Tensile Strength Rm MPa

Min. % elongation after fracture

Nominal thickness (mm)

Nominal thickness (mm)

≥3 ≤50

≥50 ≤100

≥100 ≤150

≥3 ≤50

≥50 ≤100

≥100 ≤150

S690QL

1.8931

690

650

630

770/940

760/930

710/900

14

Due to the material’s high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency. The technical details of S690QL are outlined below. S690QL Grade Designation. The grade designation of S690QL are the followings = Structural Steel; 690 = minimum yield strength (MPa)S690QL / 1.8928 Steel Number Chemical composition Chemical composition of steel S690QL (1.8928), Standards of steel S690QL (1.8928) Mechanical Properties of steel S690QL (1.8928) Equivalent grades of steel S690QL (1.8928) steel S690QL (1.8928) Tensile Strength, Elongation, Proof strength , HardnessS690QL High Yield Strength SteelS690QL Dillimax 690T is a fine grained quenched and tempered steel plate notable for its high strength. S690QL plates are used in a wide variety of engineering applications where strength is important including cranes, critical structural components in building and stadia and
EN 10025-6 S690QL stock list

Grade

Size mm

Thick

Width

Length

BS700MCK2

6*1500*13000

6

1500

13000

BS700MCK2

6*1500*13000

6

1500

13000

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*6100

6

1500

6100

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1500*8500

6

1500

8500

BS700MCK2

6*1550*11000

6

1550

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

7*1500*11000

7

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*11000

8

1500

11000

BS700MCK2

8*1500*13000

8

1500

13000

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1550*6100

8

1550

6100

BS700MCK2

8*1800*13000

8

1800

13000

BS700MCK2

8*1800*13000

8

1800

13000

BS900D

3*1400*9000

3

1400

9000

BS900D

3*1400*9000

3

1400

9000

BS900D

4*1500*13000

4

1500

13000

BS900D

5*1500*12000

5

1500

12000

BS900D

6*1650*12300

6

1650

12300

BS900D

6*1650*12300

6

1650

12300

BS900D

6*1650*2500

6

1650

2500

BS900D

7*1500*12000

7

1500

12000

BS900D

7*1500*12000

7

1500

12000

BS900D

8*1500*12000

8

1500

12000

BS900D

8*1800*13000

8

1800

13000

BS960E

12*1500*12000

12

1500

12000

BS960E

12*1500*12000

12

1500

12000

BS960E

3*1400*9000

3

1400

9000

BS960E

4*1500*13000

4

1500

13000

BS960E

4*1500*13000

4

1500

13000

BS960E

5*1500*12000

5

1500

12000

BS960E

5*1500*12000

5

1500

12000

High power quenched and tempered metal plate can be easily welded and fabricated. Gangsteel is specialised in producing and exporting carbon metal plates, chrome steel plates and carbon metal profile chrome steel profile Material. as the welding heat enter improve as much as 30.9kJ/cm, the changes of microstructure and impact toughness have been small.

The manufacturing of the S690QL – ESSAR PLATES is finished by using premium high quality of alloy that is actually sourced from dependable market vendors. The material right here is warmth handled the tempering and quenching process and is having excellent welding and ending properties. The manufacturing of the plates is done under the very strict supervision of the professionals’ experts that are having good years of working expertise and wanted expertise.

If yes then shall be delivered on time and if not time taken will depend on the fabrication of ordered plates as per its specifications. The suppliers are having tie-ups with the reputable logistic partner which are having good years of experience are able to take heavy transport. The ordered S690QL – ESSAR PLATES shall be delivered on time and in correct situation.

for welding the structures made of the high stren gth steel S690QL is presented. That steel belongs in to a group of steels with e xceptional mechanical properties. The most prominent properties S690QL Structural Steel Plate, S690QL Plate, DILLIMAX 690 S690QL Structural Steel Plate Specification Thickness 12 60mm Width 1500 3500mm Length 3000 18000mm Grade S690QL EN10137 2 EN10025 6:2004, A709 100, DILLIMAX 690, NAXTRA 70, WELDOX 700, E690, JFE HITEN 780LE, ALFORM 700. Properties of S690QL Structural Steel PlateEN 10025 6 S690QL high yield structural steels Plates Other Types Of EN 10025 6 S690QL Q + T structural steels Plates . EN 10025 6 Plates Stockholder, S690QL Plates Stockists in Maharashtra Mumbai, Grade S690QL hot rolled structural steel Plates Stockyard, high yield strength EN 10025 6 S690QL structural steels Plate wholesaler, S690QL (Q + T ) quenched and tempered condition heat treatment steel plate, material No. 1.8928 Plates Suppliers

S690QL Plates is a high yield structural steel or High strength steels grade produced in compliance with EN 10025:6:2004. The material is heats treated using the quench and temper process and has good bending and welding propertiesS690QL/S690QL1/S690QL2 High Strength Steel PlateS690Q/S690QL/S690QL1 HSLA steel plate with Quenching and Tempering Steel. 1.Applicationlow temperature resistant, high strength of key parts, construction machinery, mining machinery structure, etc. 2 .Steel GradesS690Q/S690QL/S690QL1 . Execution standardBS EN10025 04 Size5 ~ 300 mm x 1500 4500 mm x L. 3 . Supply technical conditionsMicrostructure, mechanical properties and microtexture of It is shown that it is possible to weld this high yield strength steel using FSW process with satisfactory geometric, microstructural and mechanical properties. Highlights1000 mm 400 mm 8 mm S690QL steel plates are joined by friction stir welding (FSW). Maximum hardness is reduced by optimization of process parameters.

Two try out campaigns of friction stir welding (FSW) were performed with different friction parameters to join S690QL high yield strength steel. The welds were investigated at macroscopic and microscopic scales using optical and electronic microscopy and microhardness mapping. Welds of the second campaign exhibit microstructures and mechanical EN 10025 6 S690QLS690 QLS690QL High Yield Steel Victor Steel is leading suppliers of S690QL Steel Plates.we have Large stock of EN 10025 6 S690QL plate.EN 10025 S690QL High Strength Structural Steel Plate price US $300 800/TonS690QL Plate Supplier Exporter India / S690QL Plate Price S690ql Steel Exporter India, Astm A514 S690ql High Tensile Structural Steel Plate, High Yeild Strength Alloy Naxtra M700 Steel Plates, Dillimax 690t High Yeild Steel Plates Exporter, Qste 690 Tm Hsla Yield Steel Plate, Din En S690 Q Plates Stockiest, S890ql Steel

S690QL Longitudinal Transverse 35 J 40 J 30 J 30 J 27 J 60 J S690QL1 Longitudinal Transverse 40 J 50 J 35 J 40 J 30 J 30 J 27 J Number of Tests Tensile test and impact test (3 samples) every 40 t or per heat treatment unit respectively.Mechanical properties of EN10025 6 1.8928 high strength EN10025 6 1.8928 high strength S690QL steel plate is structural steel grade with good bending and welding properties. S690QL steel plate is always heat treated using the quench and temper process. In S690QL steel, the code “S” means structural steel; the code “Q”refers to the delivery condition, in this case to quenched & Tempered; the code “L” means that the average minimum values for impact S690 QL EN 100256:2004 + A1:2009 Quenched and 1) The code “S” for steel grade S690QL means structural steel. 2) The code “Q” refers to the delivery condition, in this case to quenched and tempered. 3) Code “L” means that the average minimum values for impact energy have been defined at a temperature of 40°C.

Stainless Steel

As the plate’s manufacturing is finished by making good use of optimum quality of alloy, it tends to supply many good properties. Those are excessive tensile power, toughness, weldability, high flexibility, sturdiness, longevity, withstanding heavy hundreds, good dimensional accuracy and nice floor finishes. Additionally, it’s having a larger capacity to be totally proof against corrosion, pitting, stress corrosion cracking, erosion, crevice corrosion, abrasion, and erosion and so forth.

More Content From Masteel Uk Ltd

  • With nearly 20 years’ expertise, Henan HZZ is now known as one of many leading manufacturers and suppliers of en s690ql carbon and low-alloy high-power metal plate with influence take a look at.
  • Due to the steels excessive power, structures may be designed lighter, payloads increased, and vitality used extra effectively.
  • It is able to improve the performance, durability, and security of vehicles, lifting tools, and steel constructions.
  • The joints have been welded on S690QL excessive strength metal plates using the Metal Active Gas Welding and two filler materials of different properties.
  • Please rest assured to buy high quality metal products with excessive power from our factory.

In compliance with various raw material quality requirements and business norms, the production is made efficient. The quality management team is employed which are trying at the quality of the plates to assure that high quality is maintained till plates attain to its patrons. DILLIMAX 690 is a high power quenched and tempered, nice grained structural steel with a minimal yield strength of 690 MPa 2 in its delivery condition .

EN 10025-6 S690QL chemical composition

Steel with minimum yield strength of 690 MPa has proved very popular with steel customers because of its availability, value, and ease of fabrication. It is ready to improve the performance, sturdiness, and safety of autos, lifting gear, and steel buildings. Due to the steels high power, constructions can be designed lighter, payloads elevated, and vitality used more efficiently. With nearly 20 years’ experience, Henan HZZ is now often known as one of many leading manufacturers and suppliers of en s690ql carbon and low-alloy high-power metal plate with influence take a look at.

Steel is heated to a point above its higher crucial temperature and is then very quickly cooled in water. This methodology of cooling, known as quenching, induces a transformation within the crystalline construction of the metal which leaves it a lot tougher. Unfortunately the metal in this situation can be very brittle and it isn’t attainable https://gangsteel.com/low-alloy-and-high-strength-steel-plate/en10025-6-steel-plate/ to use it in lots of applications. A method of heat therapy for assuaging this downside is known as tempering and requires the quenched steel to be re-heated although this time to beneath the lower critical temperature. S690QL A excessive strength structural steel supplied in quenched and tempered situation.

EN 10025-6 S690QL chemical composition
Tagged on: